Design and optimization of a longitudinal feedback kicker cavity for the HLS-Ⅱ storage ring

  • In the Hefei Light Source (HLS) storage ring, multibunch operation is used to obtain a high luminosity. Multibunch instabilities can severely limit light source performance with a variety of negative impacts, including beam loss, low injection efficiency, and overall degradation of the beam quality. Instabilities of a multibunch beam can be mitigated using certain techniques including increasing natural damping (operating at a higher energy), lowering the beam current, and increasing Landau damping. However, these methods are not adequate to stabilize a multibunch electron beam at a low energy and with a high current. In order to combat beam instabilities in the HLS storage ring, active feedback systems including a longitudinal feedback system (LFB) and a transverse feedback system (TFB) will be developed as part of the HLS upgrade project, the HLS-Ⅱ storage ring project. As a key component of the longitudinal bunch-by-bunch feedback system, an LFB kicker cavity with a wide bandwidth and high shunt impedance is required. In this paper we report our work on the design of the LFB kicker cavity for the HLS-Ⅱ storage ring and present the new tuning and optimization techniques developed in designing this high performance LFB kicker.
      PCAS:
  • 加载中
  • [1] WANG Lin, LI Wei-Min, FENG Guang-Yao, XU Hong-Liang, ZHANG Shan-Cai, GAO Wei-Wei, FAN Wei. The Upgrade Project of Hefei Light Source (HLS). In Proceedings of the IPAC'10. Kyto, Japan. 2588-2590[2] Serio M, Boni R, Drago A, Gallo A, Ghigo A, Marcellini F, Migliorati M, Zobov M, Claus R, Fox J, et al. Multi-Bunch Instabilities and Cures. In Proc. European Particle Accelerator Conference. 1996[3] Oxoby G, Claus R, Fox J, Hindi H, Hoejlich J, Linscott I, Olsen J, Perbhakal S, Sapozhnikov L, Corlett J, et al. Bunch-by-Bunch Longitudinal Feedback System for PEP-Ⅱ. In EPAC 94: proceedings. 1994, 1616-1618[4] Teytelman D, Rivetta C, Van Winkle D, Akre R, Fox J, Krasnykh A, Drago A, Flanagan J, Naito T, Tobiyama M. Design and Testing of Gproto Bunch-by-Bunch Signal Processor. THPCH103, EPAC. 2006, 6[5] XU W, WU W, HE D, WU Y K. Design of Longitudinal Feedback Kicker for HLS Storage Ring. In Particle Accelerator Conference. New York, NY, USA, IEEE. 2011[6] Gallo A, Boni R, Ghigo A, Marcellini F, Serio M, Zobov M. A Waveguide Overloaded Cavity as Longitudinal Kicker for the DAΦNE Bunch-by-Bunch Feedback System. Part. Accel., 1996, 52: 95-113[7] Kim Y, Kwon M, Huang J, Namkung W, Ko I. Longitudinal Feedback System Kicker for the PLS Storage Ring. Nuclear Science, IEEE Transactions on, 2000, 47(2): 452-467[8] WU W, Kim Y, LI J, Teytelman D, Busch M,d WANG P, Swift G, Park I, Ko I. Development of a Bunch-by-Bunch Longitudinal Feedback System with a Wide Dynamic Range for the HIGS Facility. Nuclear Instruments Methods in Physics Research. Section A. Accelerators, Spectrometers, Detectors, and Associated Equipment, 2011, 632(1): 32-42[9] Wiedemann H. Particle Accelerator Physics. Vol. 1. Springer Verlag, 2003[10] Pozer D. Microwave Engineering. John Wiley Sons, 2005. 298-302[11] Cohn S. Properties of Ridge Wave Guide. Proceedings of the IRE, 1947, 35(8): 783-788[12] Kelley C. Solving Nonlinear Equations with Newton's Method. Vol. 1. Society for Industrial Mathematics, 2003
  • 加载中

Get Citation
XU Wei and HE Duo-Hui. Design and optimization of a longitudinal feedback kicker cavity for the HLS-Ⅱ storage ring[J]. Chinese Physics C, 2013, 37(3): 037003. doi: 10.1088/1674-1137/37/3/037003
XU Wei and HE Duo-Hui. Design and optimization of a longitudinal feedback kicker cavity for the HLS-Ⅱ storage ring[J]. Chinese Physics C, 2013, 37(3): 037003.  doi: 10.1088/1674-1137/37/3/037003 shu
Milestone
Received: 2012-04-25
Revised: 1900-01-01
Article Metric

Article Views(1980)
PDF Downloads(297)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Design and optimization of a longitudinal feedback kicker cavity for the HLS-Ⅱ storage ring

    Corresponding author: XU Wei,

Abstract: In the Hefei Light Source (HLS) storage ring, multibunch operation is used to obtain a high luminosity. Multibunch instabilities can severely limit light source performance with a variety of negative impacts, including beam loss, low injection efficiency, and overall degradation of the beam quality. Instabilities of a multibunch beam can be mitigated using certain techniques including increasing natural damping (operating at a higher energy), lowering the beam current, and increasing Landau damping. However, these methods are not adequate to stabilize a multibunch electron beam at a low energy and with a high current. In order to combat beam instabilities in the HLS storage ring, active feedback systems including a longitudinal feedback system (LFB) and a transverse feedback system (TFB) will be developed as part of the HLS upgrade project, the HLS-Ⅱ storage ring project. As a key component of the longitudinal bunch-by-bunch feedback system, an LFB kicker cavity with a wide bandwidth and high shunt impedance is required. In this paper we report our work on the design of the LFB kicker cavity for the HLS-Ⅱ storage ring and present the new tuning and optimization techniques developed in designing this high performance LFB kicker.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return