Field measurement for superconducting magnets of ADS injector Ⅰ

YANG Xiang-Chen; PENG Quan-Ling; XU Feng-Yu; CHEN An-Bin; GAO Yao; HOU Zhen-Hua; WANG Bing

doi:10.1088/1674-1137/38/10/107004

Chinese Physics C> 2014, Vol. 38> Issue(10) : 107004 DOI: 10.1088/1674-1137/38/10/107004

Field measurement for superconducting magnets of ADS injector Ⅰ

Abstract
HTML
Reference
Related

PDF

Abstract：
A superconducting magnet prototype for Accelerator Driven Sub-critical System Injection-Ⅰ had been designed and fabricated, and tested in a new made vertical Dewar in November 2012. Batch magnet production was processed after some major revision from the magnet prototype, they include: removing off the perm-alloy shield, extending the iron yoke, using thin superconducting wire, etc. The first one of the batch magnets was tested in the vertical Dewar at the Harbin Institute of Technologyin in September 2013. A field measurement was carried out at the same time by the measurement platform that was seated on the top of the vertical Dewar，the measurement results met the design requirements. This paper will present the field measurement system design, measurement results and discussion on the residual field from the persistent current effect.

References

[1]

Zeller A F et al. IEEE Transaction on Applied Superconductivity, 2002, 12: 329[2] YAN Fang, LI Zhi-Hui, MENG Cai et al. Chinese Physics C, 2014, to be published[3] PENG Quan-Ling, WANG Bing, CHEN Yuan et al. Chinese Physics C, 2014, 38: 037002[4] Tartaglia M A, Burkhardt E, Leach T et al. IEEE Transaction on Applied Superconductivity, 2010, 20: 312[5] Turner S. CERN Accelerator School Superconductivity in Particle Accelerators. 1989, CERN 89-04[6] PENG Q L, McMurry S M, Coey J M D. Journal of Magnetism and Magnetic Material, 2004, 268: 165[7] Opera Manager User Guide. Version 14R1, Vector Fields Software. July 2011

[1]	Kui-Xiang Gu , Feng Bing , Wei-Min Pan , Tong-Ming Huang , Qiang Ma , Fan-Bo Meng . Development of fundamental power coupler for C-ADS superconducting elliptical cavities. Chinese Physics C, 2017, 41(6): 067001. doi: 10.1088/1674-1137/41/6/067001
[2]	Qing Gao , Jing-Zhi Zhang , Chun-Hua Li , Jun-Hao Yin . Alignment and measurement of the magnetic field for the BESIII muon counter. Chinese Physics C, 2016, 40(11): 116001. doi: 10.1088/1674-1137/40/11/116001
[3]	Wei-Long Chen , Zhi-Jun Wang , Chi Feng , Wei-Ping Dou , Yue Tao , Huan Jia , Wang-Sheng Wang , Shu-Hui Liu , Yuan He . Beam-based calibrations of the BPM offset at C-ADS Injector Ⅱ. Chinese Physics C, 2016, 40(7): 077003. doi: 10.1088/1674-1137/40/7/077003
[4]	Zheng Gao , Yuan He , Xian-Wu Wang , Wei Chang , Rui-Feng Zhang , Zheng-Long Zhu , Sheng-Hu Zhang , Qi Chen , Tom Powers . Study on transient beam loading compensation for China ADS proton linac injector Ⅱ. Chinese Physics C, 2016, 40(5): 057005. doi: 10.1088/1674-1137/40/5/057005
[5]	Na Liu , Yi Sun , Guang-Wei Wang , Zheng-Hui Mi , Hai-Ying Lin , Qun-Yao Wang , Rong Liu , Xin-Peng Ma . Tuner control system of Spoke012 SRF cavity for C-ADS injector I. Chinese Physics C, 2016, 40(9): 097001. doi: 10.1088/1674-1137/40/9/097001
[6]	Jing Wang , Jian-Long Huang , Xiao-Qi Zhang , Bin Zhang , Yuan He , Zhou-Li Zhang , Ai-Min Shi . Frequency tuning with RFQ temperature in China ADS Injector Ⅱ. Chinese Physics C, 2016, 40(3): 037003. doi: 10.1088/1674-1137/40/3/037003
[7]	YANG Zheng , TANG Jing-Yu , YAN Fang , PEI Shi-Lun , CHEN Yuan , LI Zhi-Hui , GENG Hui-Ping . Transverse profile expansion and homogenization at target for the injector Scheme-Ⅰ test stand of China-ADS. Chinese Physics C, 2015, 39(2): 027001. doi: 10.1088/1674-1137/39/2/027001
[8]	SUN Biao , YAN Fang , PEI Shi-Lun , MENG Cai , TANG Jing-Yu . Compensation-rematch for the major components of C-ADS injector-I. Chinese Physics C, 2015, 39(11): 117003. doi: 10.1088/1674-1137/39/11/117003
[9]	XU Meng-Xin , HE Yuan , ZHANG Sheng-Hu , XIA Jia-Wen . Adjusting the accelerating field distribution of a superconducting CH cavity. Chinese Physics C, 2015, 39(5): 057009. doi: 10.1088/1674-1137/39/5/057009
[10]	CHEN Yu-Quan , MA Li-Zhen , WU Wei , GUAN Ming-Zhi , WU Bei-Min , MEI En-Ming , XIN Can-Jie . Design of a conduction-cooled 4 T superconducting racetrack for a multi-field coupling measurement system. Chinese Physics C, 2015, 39(12): 129001. doi: 10.1088/1674-1137/39/12/129001
[11]	MENG Fan-Bo , CHEN Xu , PAN Wei-Min , HUANG Tong-Ming , MA Qiang , LIN Hai-Ying , PENG Xiao-Hua . Study and design of RF coupler for Chinese ADS HWR superconducting cavity. Chinese Physics C, 2014, 38(11): 117002. doi: 10.1088/1674-1137/38/11/117002
[12]	REN Guang-Yi , ZENG Ming , HE Yuan , LI Yu-Xiong , LI Wei-Min . Study on the selection of BLM detector for C-ADS Injector Ⅱ. Chinese Physics C, 2014, 38(11): 117004. doi: 10.1088/1674-1137/38/11/117004
[13]	MENG Cai , LI Zhi-Hui , TANG Jing-Yu . Error analysis and lattice improvement for the C-ADS Injector-Ⅰ. Chinese Physics C, 2014, 38(6): 067008. doi: 10.1088/1674-1137/38/6/067008
[14]	PENG Quan-Ling , WANG Bing , CHEN Yuan , YANG Xiang-Chen . Physical design of superconducting magnet for ADS injection Ⅰ. Chinese Physics C, 2014, 38(3): 037002. doi: 10.1088/1674-1137/38/3/037002
[15]	LI Zhi-Hui , TANG Jing-Yu , YAN Fang , GENG Hui-Ping , MENG Cai , SUN Biao , CHENG Peng , GUO Zhen , SUN Ji-Lei . Longitudinal instability caused by long drifts in the C-ADS injector-Ⅰ. Chinese Physics C, 2013, 37(3): 037005. doi: 10.1088/1674-1137/37/3/037005
[16]	WANG Zhi-Jun , HE Yuan , WANG Wang-Sheng , LIU Shu-Hui , JIA Huan , LI Chao , XU Xian-Bo , CHEN Xi-Meng . End-to-end simulation of the C-ADS Injector Ⅱ with a 3-D field map. Chinese Physics C, 2013, 37(4): 047003. doi: 10.1088/1674-1137/37/4/047003
[17]	WANG Zhi-Jun , HE Yuan , LIU Yong , YUE Wei-Ming , YANG Xiao-Liang , WU Wei , LI Chao , XIAO Chen , JIA Huan . The design simulation of the superconducting section in the ADS injector Ⅱ. Chinese Physics C, 2012, 36(3): 256-260. doi: 10.1088/1674-1137/36/3/012
[18]	ZHU Ying-Shun , YANG Mei , ZHANG Zhuo , CHEN Wan , YIN Bao-Gui , SHI Cai-Tu , KANG Wen . Design and end chamfer simulation of PEFP beam line curved dipole magnets. Chinese Physics C, 2011, 35(7): 684-688. doi: 10.1088/1674-1137/35/7/015
[19]	SUN An , TANG Ya-Zhe , ZHANG Li-Ping , LI Ying-Min , Sung Kim . A coaxial HOM coupler for a superconducting RF cavity and its low-power measurement results. Chinese Physics C, 2011, 35(3): 301-307. doi: 10.1088/1674-1137/35/3/017
[20]	WANG Fang , LIN Lin , ZHANG He , HAO Jian-Kui , ZHANG Bao-Cheng , LIU Ke-Xin . Amplitude and phase stability studies in a DC superconducting injector. Chinese Physics C, 2011, 35(9): 855-858. doi: 10.1088/1674-1137/35/9/013

Access

Get Citation

YANG Xiang-Chen, PENG Quan-Ling, XU Feng-Yu, CHEN An-Bin, GAO Yao, HOU Zhen-Hua and WANG Bing. Field measurement for superconducting magnets of ADS injector Ⅰ[J]. Chinese Physics C, 2014, 38(10): 107004. doi: 10.1088/1674-1137/38/10/107004

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-11-27
Revised: 1900-01-01

Article Metric

Article Views(2326)
PDF Downloads(263)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Field measurement for superconducting magnets of ADS injector Ⅰ

Received Date: 2013-11-27

Accepted Date: 1900-01-01

Available Online: 2014-10-05

Abstract: A superconducting magnet prototype for Accelerator Driven Sub-critical System Injection-Ⅰ had been designed and fabricated, and tested in a new made vertical Dewar in November 2012. Batch magnet production was processed after some major revision from the magnet prototype, they include: removing off the perm-alloy shield, extending the iron yoke, using thin superconducting wire, etc. The first one of the batch magnets was tested in the vertical Dewar at the Harbin Institute of Technologyin in September 2013. A field measurement was carried out at the same time by the measurement platform that was seated on the top of the vertical Dewar，the measurement results met the design requirements. This paper will present the field measurement system design, measurement results and discussion on the residual field from the persistent current effect.

HTML

Reference (1)

Field measurement for superconducting magnets of ADS injector Ⅰ

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

Field measurement for superconducting magnets of ADS injector Ⅰ

HTML

目录