RF modulation studies on an S band pulse compressor

Guan Shu; Feng-Li Zhao; Shi-Lun Pei; Ou-Zheng Xiao

doi:10.1088/1674-1137/40/3/037002

Chinese Physics C> 2016, Vol. 40> Issue(3) : 037002 DOI: 10.1088/1674-1137/40/3/037002

RF modulation studies on an S band pulse compressor

1.
Laboratory of Particle Acceleration Physics &
2.
University of Chinese Academy of Sciences, Beijing 100049, China
3.
Laboratory of Particle Acceleration Physics &

Abstract
HTML
Reference
Related

PDF

Abstract：
An S band SLED-type pulse compressor has been manufactured by the Institute of High Energy Physics, Beijing, trying to reach 100 MW maximum input power, which means the output peak power is about 500 MW at the phase reversal time. To improve the reliability at very high power, amplitude modulation and phase modulation with flat-top output are considered, and RF modulation studies on the S-band SLED are presented in this paper. Furthermore, a method is developed using the CST Microwave Studio transient solver to simulate the time response of the pulse compressor, which can verify the modulation theory. In addition, the experimental setup was constructed and the flat-top output obtained in low power tests. Both amplitude modulation and phase modulation methods can give flat-top output, and the average power gain for both methods is almost the same.
- S-band ,
- SLED ,
- amplitude modulation ,
- phase modulation ,
- flat-top output ,
- transient solver

References

[1]	H. Matsumoto, H. Baba, S. Yamaguchi et al, Nucl. Instrum. Methods A, 330 (1) : 1-11 (1993)
[2]	A. Fiebig, Ch. Schieblich, A SLED Type Pulse Compressor with Rectangular Pulse Shape, in Proceedings of the 2nd European Particle Accelerator Conference (Nice, France, 1990), p. 937-939
[3]	R. Bossart, P. Brown, J. Mourier et al, CERN CLIC-Notes, No. 592, 2004
[4]	T. Inagaki, 8-GeV C-band accelerator construction for XFEL/SPring-8, in Proceedings of the 24th Linear Accelerator Conference (Victoria, Canada, 2008), p. 1090-1094
[5]	GU Peng-Da, Studies on New RF Pulse Compressor, Ph.D. Thesis (Beijing: Institute of High Energy Physics, CAS,1999) (in Chinese)
[6]	S. Kashiwagi, H. Hayano, K. Kubo et al, Beam loading compensation using phase to amplitude modulation method in ATF, in Proceedings of the XIX International Linear Accelerator Conference(1998), p. 91-93
[7]	Microwave Studio, Computer Simulation Technology, Darmstadt, Germany. www.cst.com
[8]	Y. Joo, H. Lee, W. Hwang et al, Journal of the Korean Physical Society, 63(7) :1253-1261 (2013)
[9]	K. Shirasawa, T. Inagaki, H. Kitamura et al, High power test of c-band accelerating system for Japanese XFEL project, in Proceedings of the Asian Particle Accelerator Conference (Indore, India, 2007), p. 2095-2097
[10]	S. H. Shaker,S. R. Corsini,P. K. Skowronski et al, phase modulator programming to get flat pulses with desired length and power from the CTF3 pulse compressors, in Proceedings of the International Particle Accelerator Conference (Kyoto, Japan, 2010), p. 1425-1427
[11]	C. Serpico, M. Dal Forno, A. Fabris et al, Optimization of the SLED Phase Modulation Parameters of the FERMI Linac, in Proceedings of the North American Particle Accelerator Conference (Pasadena, USA, 2013), p. 981-983

[1]	Zheng-Feng Xiong , Cheng Cheng , Jian Yu , Huai-Bi Chen , Hui Ning . Switching speed effect of phase shift keying in SLED for generating high power microwaves. Chinese Physics C, 2016, 40(1): 017006. doi: 10.1088/1674-1137/40/1/017006
[2]	ZHAO Dan-Yang , WANG Guang-Wei , PAN Wei-Min , SUN Yi , QIU Feng , ZHANG Juan , MI Zheng-Hui , LIN Hai-Ying , SHA Peng , WANG Qun-Yao , XU Bo , MA Qiang . High accuracy amplitude and phase measurements based on a double heterodyne architecture. Chinese Physics C, 2015, 39(1): 017002. doi: 10.1088/1674-1137/39/1/017002
[3]	LI Lin , FANG Wen-Cheng , WANG Chao-Peng , GU Qiang . Modeling and analysis of SLED. Chinese Physics C, 2015, 39(4): 047002. doi: 10.1088/1674-1137/39/4/047002
[4]	CHANG Zhe , LI Xin , WANG Sai . Quadrupole-octopole alignment of CMB related to the primordial power spectrum with dipolar modulation in anisotropic spacetime. Chinese Physics C, 2015, 39(5): 055101. doi: 10.1088/1674-1137/39/5/055101
[5]	XIAO Ou-Zheng . Design and simulation of a C-band SLED with mode converter. Chinese Physics C, 2014, 38(11): 117009. doi: 10.1088/1674-1137/38/11/117009
[6]	BI Xiao-Jun , CHEN Tian-Lu , CHEN Wen-Yi . Updated study on multi-TeV cosmic-ray modulation with the Tibet Ⅲ air shower array using the east-west method. Chinese Physics C, 2013, 37(3): 035001. doi: 10.1088/1674-1137/37/3/035001
[7]	PEI Shi-Lun , XIAO Ou-Zheng . Studies on an S-band bunching system with hybrid buncher. Chinese Physics C, 2013, 37(11): 117001. doi: 10.1088/1674-1137/37/11/117001
[8]	PEI Shi-Lun , LI Xiao-Ping , XIAO Ou-Zheng . Error and jitter e ect studies on the SLED for the BEPCⅡ-linac. Chinese Physics C, 2012, 36(5): 456-463. doi: 10.1088/1674-1137/36/5/014
[9]	WANG Fang , LIN Lin , ZHANG He , HAO Jian-Kui , ZHANG Bao-Cheng , LIU Ke-Xin . Amplitude and phase stability studies in a DC superconducting injector. Chinese Physics C, 2011, 35(9): 855-858. doi: 10.1088/1674-1137/35/9/013
[10]	ZHOU Zu-Sheng , CHI Yun-Long , GU Meng-Ping , PEI Guo-Xi . 200 MW S-band traveling wave resonant ring development at IHEP. Chinese Physics C, 2010, 34(3): 402-404. doi: 10.1088/1674-1137/34/3/019
[11]	SHEN Guo-Bao , Masanori Ikegami . Tuning of RF amplitude and phase for the drift tube linac in J-PARC. Chinese Physics C, 2009, 33(7): 577-582. doi: 10.1088/1674-1137/33/7/014
[12]	LIU Rong , WANG Zheng , PAN Wei-Min , WANG Guang-Wei , LIN Hai-Ying , SHA Peng , ZENG Ri-Hua . FPGA-based amplitude and phase detection in DLLRF. Chinese Physics C, 2009, 33(7): 594-598. doi: 10.1088/1674-1137/33/7/017
[13]	LI Wen-Jun , XU Zhou , LIN Yu-Zheng , SHEN Xu-Ming , LIU Jie , CHEN Ya-Nan , LI Ming , YANG Xing-Fan . Cold-Test Experimental Research of an S-Band Broadband High Power CCTWT. Chinese Physics C, 2008, 32(S1): 178-180.
[14]	ZHANG Jing-Ru , ZHAO Feng-Li , PEI Shi-Lun . Optimization Design and Application of S-Band 3dB Directional Coupler. Chinese Physics C, 2008, 32(S1): 172-174.
[15]	DONG Dong , ZHOU Zu-Sheng , ZHANG Liang , LI Gang-Ying , TIAN Shuang-Min . IHEP S-band 45MW Pulse Power Klystron Development. Chinese Physics C, 2006, 30(11): 1113-1115.
[16]	LI Hao-Hu , WANG Bing , ZHANG Jin-Quan , TANG Jing-Yu . Effect of Flat-Top Acceleration on Longitudinal Phase Space. Chinese Physics C, 2004, 28(8): 889-892.
[17]	ZHAO Feng-Li , HUANG Yong-Qing . 1kW S-Band RF Solid State Amplifier for BEPC Linac Microwave Driver System. Chinese Physics C, 2003, 27(11): 1031-1033.
[18]	GU Peng-Da , PEI Guo-Xi , WANG Shu-Hong . SLED System for Long Pulse Multi-bunch Linac. Chinese Physics C, 2001, 25(4): 348-353.
[19]	LIU JinYing , XU HongLiang , DIAO CaoZheng , Jm QiKa , HE DuoHui . Investigation on Increasing the Amplitude of Modulation of the Spontaneous Emission of an Optical Klystron. Chinese Physics C, 2000, 24(1): 77-81.
[20]	Jin Kai . High-Power Test of Iris Coating in the S-Band Linear Collider. Chinese Physics C, 1999, 23(9): 931-935.

Access

Get Citation

Guan Shu, Feng-Li Zhao, Shi-Lun Pei and Ou-Zheng Xiao. RF modulation studies on an S band pulse compressor[J]. Chinese Physics C, 2016, 40(3): 037002. doi: 10.1088/1674-1137/40/3/037002

Guan Shu, Feng-Li Zhao, Shi-Lun Pei and Ou-Zheng Xiao. RF modulation studies on an S band pulse compressor[J]. Chinese Physics C, 2016, 40(3): 037002. doi: 10.1088/1674-1137/40/3/037002 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2015-06-01
Revised: 2015-09-06

Fund

Supported by National Natural Science Foundation of China (11475201)

Article Metric

Article Views(1603)
PDF Downloads(152)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

RF modulation studies on an S band pulse compressor

1. Laboratory of Particle Acceleration Physics &

2. University of Chinese Academy of Sciences, Beijing 100049, China

3. Laboratory of Particle Acceleration Physics &

Received Date: 2015-06-01

Accepted Date: 2015-09-06

Available Online: 2016-02-29

Fund Project: Supported by National Natural Science Foundation of China (11475201)

Abstract: An S band SLED-type pulse compressor has been manufactured by the Institute of High Energy Physics, Beijing, trying to reach 100 MW maximum input power, which means the output peak power is about 500 MW at the phase reversal time. To improve the reliability at very high power, amplitude modulation and phase modulation with flat-top output are considered, and RF modulation studies on the S-band SLED are presented in this paper. Furthermore, a method is developed using the CST Microwave Studio transient solver to simulate the time response of the pulse compressor, which can verify the modulation theory. In addition, the experimental setup was constructed and the flat-top output obtained in low power tests. Both amplitude modulation and phase modulation methods can give flat-top output, and the average power gain for both methods is almost the same.

HTML

Reference (11)

RF modulation studies on an S band pulse compressor

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article

RF modulation studies on an S band pulse compressor

HTML

目录