Accurate Burst Trigger Mode for Dragon-Ⅰ Electron Beam Measurement System

JIANG Xiao-Guo; LI Cheng-Gang; WANG Yuan; DAI Wen-Hua; XIA Lian-Sheng; CHEN Nan; YANG Guo-Jun

Chinese Physics C> 2006, Vol. 30> Issue(8) : 784-787

Accurate Burst Trigger Mode for Dragon-Ⅰ Electron Beam Measurement System

Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China

Abstract
HTML
Reference
Related

PDF

Abstract：
The electron beam measurement system for Dragon-I must work synchronously with the beam production and transportation accurately in order to obtain correct data．The synchronization with about 1ns is important．The output waveform of Blumlein lines in pulsed-power system is of amplitude of about 250kV and 20ns active edge time(following edge)．The electron beam will hit the conversion target in about 145ns later steadily and the jitter time is about 1—2ns．The synchronization precision with the same level of the jitter time will be reached if the sharp following edge of waveform is selected to be the time base．The synchronization trigger signal for measurement system can be obtained by the way of differentiating the following edge and the accuracy of about ns can also be reached with suitable circuit parameters．The optical fiber is also adopted to remove the interference on the measurement system from the high voltage system．This kind of burst trigger mode overcomes many disadvantages such as low accuracy, long delay time, large jitter in normal trigger mode and can provide the trigger time accurately．It can meet the need to measure the electron beam parameters at any required time．

References

[1]

. DING Bo-Nan, DENG Jian-Jun, WANG Hua-Cen etal．HEP NP, 2005, 29(6): 604-610(in Chinese)(丁伯南，邓建军，王华岑等.高能物理与核物理，2005, 29(6):604-610)2. JIANG Xiao-Guo, GUO Bao-Ping, DENG Jian-Jun et al.Opto-Electronic Engineering, 2006(accepted)(in Chinese)(江孝国，郭宝平，邓建军等.光电工程，2006(已录用))3. JIANG Xiao-Guo, LI Cheng-Gang,WANG Yuan et al. Det-onation and Shock Waves, 2005, 1: 19-22(in Chinese)(江孝国，李成刚，王远等.爆轰波与冲击波,2005,1:19-22)4. XUE Fei-Biao, YANG Jian-Lun, LI Zheng-Hong. HighPower Laser and Particle Beams, 2005, 17(1): 149-152(in Chinese)(薛飞彪，杨建伦，李正宏.强激光与粒子束，2005, 17(1):149-152)5. GAO Ping, LIU De-Ben, DAI Gang et al. Eighth Sym-posium on High Power Particle Beam and High Volt-age．Sanya, 2001. 272-274(in Chinese)(高平，刘德本，代刚等.第八届高功率粒子束暨高压学术交流会.三业，2001. 272-274)

[1]	SUN Da-Rui , XU Jin-Qiang , TANG Kun . Simulation and Error Analysis of Electro-optic Sampling Measurement of Ultrashort Electron Beam Bunch Length. Chinese Physics C, 2008, 32(S1): 121-123.
[2]	LI Jin , ZHANG Kai-ZHi , DAI Zhi-Yong , ZHANG Wen-Wei , WANG Min-Hong , LAI Qing-Gui , YU Hai-Jun , LI Hong , MA Bing , SHI Jin-Shui , ZHANG Lin-Wen , DENG Jian-Jun , DING Bo-Nan . Commissioning of Dragon-Ⅰ Linear Induction Accelerator. Chinese Physics C, 2008, 32(S1): 247-249.
[3]	DAI Zhi-Yong , ZHANG Wen-Wei , XIE Yu-Tong , LI Hong , ZHANG Kai-Zhi , ZHANG Lin-Wen , LI Wei-Feng , LIU Cheng-Jun , DENG Jian-Jun , DING Bo-Nan . Development of Beam Transport System of “Dragon-Ⅰ”LIA. Chinese Physics C, 2007, 31(4): 395-399.
[4]	DAI Jian-Ping . Adjustment of Energy of BFEL Linac. Chinese Physics C, 2006, 30(S1): 93-95.
[5]	SHI Jiang-Jun , LIU Jun , LIU Jin , LI Bi-Yong . Beam Parameter Requrements for Radiography. Chinese Physics C, 2006, 30(S1): 31-33.
[6]	DU Ying-Chao , HUANG Wen-Hui , TANG Chuan-Xiang , HUA Jian-Fei , CHENG Cheng , DU Tai-Bin , XIA Bing , He Xiao-Zhong , DU Qiang , ZHENG Shu-Xin , CHEN Huai-Bi , LIN Yu-Zheng . Preliminary Experiments of Thomson Scattering X-ray Source: Measurements of Electron beam's Parameters and Their Influence on the X-ray Performance. Chinese Physics C, 2006, 30(S1): 84-86.
[7]	XU Tie-Zheng , XIE Yu-Tong , GAO Feng , DAI Wen-Hua , GU Zhan-Jun , WANG Li-Ming , WANG Hua-Cen , LI Jing . Research on New BPM Used to “Dragon Ⅰ”. Chinese Physics C, 2006, 30(9): 907-911.
[8]	YANG Guo-Jun , ZHANG Zhuo , CHEN Si-Fu , XU Tie-Zheng , MU Fan , lijin , JIANG Xiao-Guo . Beam Measurement of Dragon-I Linear Induction Accelerator. Chinese Physics C, 2006, 30(S1): 105-107.
[9]	LIU Ai-Qin , LOU Zheng-Ping , CHEN You-Zhong , ZHOU Wei-Min , Dai Zhi-Min . Analysis and Calculation on Electron Bunch Length Measurementby Using CDR. Chinese Physics C, 2005, 29(5): 517-523.
[10]	YIN Ming , ZHOU Xiao-Yan . Studies on Wehnelt of Electron-Beam Accelerator. Chinese Physics C, 2005, 29(3): 301-304.
[11]	JIANG Xiao-Guo , YANG Guo-Jun , ZHANG Kai-Zhi , SHI Jin-Shui , DENG Jian-Jun , WANG Yuan , LI Cheng-Gang . Time-Resolved Measurement System Using Optical Transition Radiation for Electron Beam of High Energy and High Current. Chinese Physics C, 2005, 29(11): 1095-1099.
[12]	DING Bo-Nan , DENG Jian-Jun , WANG Hua-Cen , CHENG Nian-An , DAI Guang-Sen , ZHANG Lin-Wen , LIU Cheng-Jun , ZHANG Wen-Wei , ZHANG Kai-Zhi , DAI Zhi-Yong , LAI Qing-Gui , LI Hong , WEN Long , LIU Xiao-Ping , LI Wei-Feng , XIE Yu-Tong , CHEN Si-Fu , YANG Guo-Jun , LI Xin , YANG An-Ming , WANG Min-Hong , YANG Xing-Lin , PAN , , , , , , , , , , . Dragon-I Linear Induction Electron Accelerator. Chinese Physics C, 2005, 29(6): 604-610.
[13]	DING Bo-Nan , ZHANG Kai-Zhi , WEN Long , WANG Meng , DAI Zhi-Yong , ZHANG Wen-Wei , LI Hong , WANG Wen-Dou , LI Jin , YANG An-Min , XIE Yu-Tong , CHEN Si-Fu , WANG Hua-Cen , DAI Guang-Sen , SHI Jin-Shui , ZHANG Lin-Wen , DENG Jian-Jun . Development of Dragon-I Injector. Chinese Physics C, 2005, 29(3): 219-223.
[14]	LONG Ji-Dong , LIN Yu-Zheng , LUO Fei , GU Zhuo-Wei , SHI Jin-Shui . Destruction Study of Tantalum Target Impacted by 12MeV Electron Beam. Chinese Physics C, 2004, 28(5): 564-568.
[15]	YIN Ming , SUN Xiao-Jun . Studies on Cockcroft-Walton Accelerator for Narrow E-Beam Lithography. Chinese Physics C, 2004, 28(3): 304-307.
[16]	LI Zhi-Hui , DAI Jian-Ping , YANG Xue-Ping , FAN Yao-Hui , XIE Jia-Lin , ZHU Jun-Biao . Analysis and Calculation on Electron Bunch Length Measurement by Using CTR. Chinese Physics C, 2003, 27(9): 831-835.
[17]	WANG Shu-Hong , WANG Jiu-Qing , YE Qiang , LE Qi . Minimization of Primary Electron Beam Radius at the Positron Production Target. Chinese Physics C, 2002, 26(12): 1302-1308.
[18]	ZHANG Yong-Hui , CHEN Hong-Bin , KANG Qiang , CAO Shao-Yun , CHANG An-Bi . Development of Repetition Frequency Electron-Beam Generator Technology. Chinese Physics C, 2002, 26(8): 876-881.
[19]	PAN Wei-Min , LI Zhong-Quan , XIE Xi . Effects of the Relativistic Electron Beam on the Phase Velocity of RF Field in Accelerator. Chinese Physics C, 2001, 25(10): 1022-1028.
[20]	YANG XiaoDong , SONG MingTao , XIA JiaWen , WEI BaoWen , WU JunLi . Adiabatic Expansion of Electron Beam. Chinese Physics C, 2000, 24(12): 1179-1184.

Access

Get Citation

JIANG Xiao-Guo, LI Cheng-Gang, WANG Yuan, DAI Wen-Hua, XIA Lian-Sheng, CHEN Nan and YANG Guo-Jun. Accurate Burst Trigger Mode for Dragon-Ⅰ Electron Beam Measurement System[J]. Chinese Physics C, 2006, 30(8): 784-787.

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2005-11-02
Revised: 2006-01-16

Article Metric

Article Views(4130)
PDF Downloads(727)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Accurate Burst Trigger Mode for Dragon-Ⅰ Electron Beam Measurement System

Corresponding author: JIANG Xiao-Guo,

Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China

Received Date: 2005-11-02

Accepted Date: 2006-01-16

Available Online: 2006-08-05

Abstract: The electron beam measurement system for Dragon-I must work synchronously with the beam production and transportation accurately in order to obtain correct data．The synchronization with about 1ns is important．The output waveform of Blumlein lines in pulsed-power system is of amplitude of about 250kV and 20ns active edge time(following edge)．The electron beam will hit the conversion target in about 145ns later steadily and the jitter time is about 1—2ns．The synchronization precision with the same level of the jitter time will be reached if the sharp following edge of waveform is selected to be the time base．The synchronization trigger signal for measurement system can be obtained by the way of differentiating the following edge and the accuracy of about ns can also be reached with suitable circuit parameters．The optical fiber is also adopted to remove the interference on the measurement system from the high voltage system．This kind of burst trigger mode overcomes many disadvantages such as low accuracy, long delay time, large jitter in normal trigger mode and can provide the trigger time accurately．It can meet the need to measure the electron beam parameters at any required time．

HTML

Reference (1)

Accurate Burst Trigger Mode for Dragon-Ⅰ Electron Beam Measurement System

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article