Design and assembly of the CsI(Tl) crystal module of the BESⅢ electro-magnetic calorimeter

DONG Ming-Yi; CAI Xiao; FANG Jian; HU Tao; LAI Yuan-Fen; LIU Chun-Xiu; L&Uuml; Jun-Guang; LIU Wan-Jin; SHANG Lei; SUN Li-Jun; WANG Zhi-Gang; XIA Xiao-Mi; YU Bo-Xiang; ZHOU Li

doi:10.1088/1674-1137/32/11/012

Chinese Physics C> 2008, Vol. 32> Issue(11) : 908-911 DOI: 10.1088/1674-1137/32/11/012

Design and assembly of the CsI(Tl) crystal module of the BESⅢ electro-magnetic calorimeter

Abstract
HTML
Reference
Related

PDF

Abstract：
The CsI(Tl) crystal modules of the Beijing Spectrometer Ⅲ (BESⅢ) electro-magnetic calorimeter (EMC) were designed and assembled through Monte Carlo simulation and experiments. After the assembly was finished, the performance of each crystal module was tested by cosmic rays. All crystal modules were found to work well before the installation of EMC.

References

[1]

. Kubota Y et al. Nucl. Instrum. Methods A, 1992, 320:66-1132. Miyabayashi K. Nucl. Instrum. Methods A, 2002, 494:298-3023. Lewandowski B. Nucl. Instrum. Methods A, 2002, 494:303-3074. Preliminary Design Report of the BES0 Detector Internal Document. 2003. 119-133 (in Chinese)5. LIU Chun-Xiu. The Monte Carlo Simulation Study of the BES0 Crystal Calorimeter. In: Institute of High Energy Physics, Chinese Academy of Sciences ed. The Postdoctoral Study Report of Institute of High Energy Physics, Chinese Academy of Sciences. 2003. 1-52 (in Chinese)6. Abashian A, Gotow K et al. Nucl. Instrum. Methods A,2003, 479: 117-2327. WANG Zhi-Gang, SHAN Li-Min et al. HEP NP, 2006,30(9): 876-879 (in Chinese)8. SHANG Lei et al. HEP NP, 2007, 31(2): 177-182 (in Chinese)9. DONG Ming-Yi et al. Quality Control of the CsI(T1) Crystal of BES0 Electro-Magnetic Calorimeter. In: Academy of Nuclear Electronics Nuclear Detection Technology ed.Proceedings of the 12th National Conference on Nuclear Electronics Nuclear Detection Technology. 2004. 254-260. (in Chinese)

Access

Get Citation

DONG Ming-Yi, CAI Xiao, FANG Jian, HU Tao, LAI Yuan-Fen, LIU Chun-Xiu, LÜ Jun-Guang, LIU Wan-Jin, SHANG Lei, SUN Li-Jun, WANG Zhi-Gang, XIA Xiao-Mi, YU Bo-Xiang and ZHOU Li. Design and assembly of the CsI(Tl) crystal module of the BESⅢ electro-magnetic calorimeter[J]. Chinese Physics C, 2008, 32(11): 908-911. doi: 10.1088/1674-1137/32/11/012

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-01-22
Revised: 2008-02-19

Article Metric

Article Views(4780)
PDF Downloads(766)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design and assembly of the CsI(Tl) crystal module of the BESⅢ electro-magnetic calorimeter

Corresponding author: DONG Ming-Yi,

Received Date: 2008-01-22
Accepted Date: 2008-02-19
Available Online: 2008-11-05

Abstract:

The CsI(Tl) crystal modules of the Beijing Spectrometer Ⅲ (BESⅢ) electro-magnetic calorimeter (EMC) were designed and assembled through Monte Carlo simulation and experiments. After the assembly was finished, the performance of each crystal module was tested by cosmic rays. All crystal modules were found to work well before the installation of EMC.