Design of a 450 MHz β=0.2 single spoke cavity at PKU

YAO Zhong-Yuan; LU Xiang-Yang; ZHAO Kui

doi:10.1088/1674-1137/33/4/011

Chinese Physics C> 2009, Vol. 33> Issue(4) : 292-296 DOI: 10.1088/1674-1137/33/4/011

Design of a 450 MHz β=0.2 single spoke cavity at PKU

Abstract
HTML
Reference
Related

PDF

Abstract：
The design of a 450 MHz β=0.2 superconducting single spoke cavity has been finished at Peking University. A theoretical model and a numerical simulation are used to study the relationship between the RF performance and the geometric parameters of the cavity. In this paper, the optimization of the spoke cavity is described in detail. The RF simulation gives the optimum parameters E_pk/E_acc of 2.65 and B_pk/E_acc of 5.22 mT/(MV/m). The mechanical properties of the cavity are also studied. Two stiff ribs are used to offer a credible mechanical stability.

References

[1]

. Shepard K W, Ostroumov P N, Delayen J R. Phys. Rev.ST. Accel. Beams, 2003, 6: 0801012. Ostroumov P N, Fuerst J D, Kelly M P et al. Acceleratorsfor the Advanced Exotic Beam Facility in the U.S. Pro-ceedings of the 2007 Particle Accelerator Conference. USA:Institute of Electrical and Electronics Engineers, Inc., 2007.1664-16663. Bousson S, Biarrotte J L et al. Spoke Cavity Developments for the Eurisol Driver. Proceedings of the 2006 Linear Ac-celerator Conference. USA: Joint Accelerator ConferencesWebsite, 2006. 704-7064. Kelly M. Status of Superconducting Spoke Cavity Develop-ment. Proceedings of the 13th International Workshop on RF Superconductivity. China: Peking University, 20075. Delayen J R. Low and Intermediate Beta Cavity Design.Proceeding of the 13th International Workshop on RF Su-perconductivity. China: Peking University, 20076. Krawczyk F L, Garnett R, LaFave R P et al. Design of aLow-β , 2-gap Spoke Resonator for the AAA Project. Pro-ceedings of the 2001 Particle Accelerator Conference. USA:Institute of Electrical and Electronics Engineers, Inc., 2001.906-9087. ZHU Feng. Researches on Surface Treatment of RF Su-perconducting Cavities and Design of a SuperconductingSpoke Cavity. Beijing: Peking University, 2004. 59-83 (inChinese)8. Apollinari G, Gonin I, Khabiboulline T et al. IEEE Trans-actions on Applied Superconductivity, 2007, 17(2): 13229. Olry G, Biarrotte J L, Junquera T et al. Design and In-dustrial Fabrication of β=0.35 Spoke-type Cavity. Proceed-ings of the 8th European Particle Accelerator Conference.France: European Physical Society Interdivisional Groupon Accelerators and CERN, 2002. 2271-2273

[1]	Xue-Fang Huang , Yi Sun , Guang-Wei Wang , Shao-Zhe Wang , Xiang Zheng , Qun-Yao Wang , Rong Liu , Hai-Ying Lin , Mu-Yuan Wang . Measurement of the transfer function for a spoke cavity of C-ADS Injector I. Chinese Physics C, 2017, 41(4): 047001. doi: 10.1088/1674-1137/41/4/047001
[2]	Hong-Juan Zheng , Jie Gao , Zhen-Chao Liu . Cavity and HOM coupler design for CEPC. Chinese Physics C, 2016, 40(5): 057001. doi: 10.1088/1674-1137/40/5/057001
[3]	Na Liu , Yi Sun , Guang-Wei Wang , Zheng-Hui Mi , Hai-Ying Lin , Qun-Yao Wang , Rong Liu , Xin-Peng Ma . Tuner control system of Spoke012 SRF cavity for C-ADS injector I. Chinese Physics C, 2016, 40(9): 097001. doi: 10.1088/1674-1137/40/9/097001
[4]	CHEN Xu , MENG Fan-Bo , MA Qiang , HUANG Tong-Ming , LIN Hai-Ying , PAN Wei-Min . Coupler conditioning and high power testing of ADS Spoke cavity. Chinese Physics C, 2014, 38(2): 027001. doi: 10.1088/1674-1137/38/2/027001
[5]	YANG Zi-Qin , LU Xiang-Yang , YANG Liu , LUO Xing , ZHOU Kui , QUAN Sheng-Wen . A preliminary quadrupole asymmetry study of a Iβ=0.12 superconducting single spoke cavity. Chinese Physics C, 2014, 38(10): 107001. doi: 10.1088/1674-1137/38/10/107001
[6]	PENG Ying-Hua , ZHANG Xin-Ying , LI Han , SHA Peng , Li Zhong-Quan , PAN Wei-Min . Design of a 325 MHz SC Spoke040 cavity at IHEP. Chinese Physics C, 2014, 38(11): 117005. doi: 10.1088/1674-1137/38/11/117005
[7]	LI Han , DAI Jian-Ping , SHA Peng , WANG Qun-Yao , HUANG Hong , LI Li-Hai , ZHANG Juan , MA Qiang , LIN Hai-Ying , SUN Yi , PAN Wei-Min . Development of a 325 MHz β =0.12 superconducting single spoke cavity for China-ADS. Chinese Physics C, 2014, 38(7): 077008. doi: 10.1088/1674-1137/38/7/077008
[8]	XU Bo , LI Han , ZHANG Juan , SHA Peng , WANG Qun-Yao , LIN Hai-Ying , HUANG Hong , DAI Jian-Ping , SUN Yi , WANG Guang-Wei , PAN Wei-Min . Low beta spoke cavity multipacting analysis. Chinese Physics C, 2013, 37(12): 127003. doi: 10.1088/1674-1137/37/12/127003
[9]	LIU Zhen-Chao , GAO Jie , LI Zhong-Quan , ZHAI Ji-Yuan , ZHAO Tong-Xian , LI Da-Zhang , LIU Yi-Lin , SUN Yi . ADS 650 MHz medium beta cavity study and design. Chinese Physics C, 2013, 37(1): 017005. doi: 10.1088/1674-1137/37/1/017005
[10]	MI Zheng-Hui , SUN Yi , WANG Guang-Wei , PAN Wei-Min , LI Zhong-Quan , DAI Jian-Ping , MA Qiang , LIN Hai-Ying , LIU Ya-Ping , XU Bo , HUANG Hong , WANG Qun-Yao , XU Yu-Fen , ZHAO Guang-Yuan , HUANG Tong-Ming , SHA Peng , MENG Fan-Bo , QIU Feng , LI Han , CHEN Xu , ZHAO Dan-Yang , ZHANG Juan . Horizontal test for BEPCⅡ 500 MHz spare cavity. Chinese Physics C, 2012, 36(10): 996-999. doi: 10.1088/1674-1137/36/10/014
[11]	LU Chang-Wang , LIU Jian-Fei , HOU Hong-Tao , MA Zhen-Yu , MAO Dong-Qing , FENG Zi-Qiang , ZHAO Shen-Jie , LUO Chen , ZHAO Yu-Bin , ZHANG Zhi-Gang , ZHENG Xiang , WEI Ye-Long , YU Hai-Bo , LI Zheng , XU Kai . Design and simulation of a new type of 500 MHz single-cell superconducting RF cavity. Chinese Physics C, 2012, 36(5): 447-451. doi: 10.1088/1674-1137/36/5/012
[12]	ZHOU Quan-Feng , ZHU-Kun , LU Yuan-Rong , GAO Shu-Li , KANG Ming-Lei , YAN Xue-Qing , GUO Zhi-Yu , CHEN Jia-Er . Simulation and experiments of rf tuning of a 201.5 MHz four-rod RFQ cavity. Chinese Physics C, 2011, 35(11): 1042-1046. doi: 10.1088/1674-1137/35/11/012
[13]	XIAO Yong-Chuan , YIN Xue-Jun , MU Zhen-Cheng , FU Shi-Nian . Study on the HOMs coupler design of spoke cavity. Chinese Physics C, 2011, 35(2): 188-192. doi: 10.1088/1674-1137/35/2/016
[14]	YANG Liu , HE Fei-Si , XU Wen-Can , ZHU Feng , LU Xiang-Yang , ZHAO Kui . Tuning for the first 9-cell TESLA cavity of PKU. Chinese Physics C, 2010, 34(4): 496-498. doi: 10.1088/1674-1137/34/4/015
[15]	YAO Zhong-Yuan , LU Xiang-Yang , ZHANG Bao-Cheng , QUAN Sheng-Wen , HE Fei-Si , ZHAO Kui . Analysis of the impacts of mechanical errors on the RF performance of a single spoke cavity. Chinese Physics C, 2010, 34(5): 576-579. doi: 10.1088/1674-1137/34/5/012
[16]	XIAO Yong-Chuan , FU Shi-Nian . Study on the Lorentz detuning and tuning of β=0.3, 352 MHz spoke cavity. Chinese Physics C, 2009, 33(9): 815-818. doi: 10.1088/1674-1137/33/9/021
[17]	LIU Hua-Chang , OUYANG Hua-Fu . Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity. Chinese Physics C, 2008, 32(4): 280-284. doi: 10.1088/1674-1137/32/4/008
[18]	ZHU Feng , QUAN Sheng-Wen , ZHAO Kui , CHEN Jia-Er . Study on High Order Modes of a β=0.45,f=350MHz Spoke Cavity. Chinese Physics C, 2006, 30(10): 1006-1009.
[19]	GE Ming-Qi , ZHAO Sheng-Chu . Lorentz Force Detuning Analysis of 700MHz Single-Cell Superconducting Cavity. Chinese Physics C, 2005, 29(4): 413-417.
[20]	ZHU Feng , QUAN Sheng-Wen , WANG Li-Fang , ZHAO Kui , CHEN Jia-Rong . Design of a β=0.45, f=350 MHz Spoke Cavity. Chinese Physics C, 2005, 29(1): 77-80.

Access

Get Citation

YAO Zhong-Yuan, LU Xiang-Yang and ZHAO Kui. Design of a 450 MHz β=0.2 single spoke cavity at PKU[J]. Chinese Physics C, 2009, 33(4): 292-296. doi: 10.1088/1674-1137/33/4/011

YAO Zhong-Yuan, LU Xiang-Yang and ZHAO Kui. Design of a 450 MHz β=0.2 single spoke cavity at PKU[J]. Chinese Physics C, 2009, 33(4): 292-296. doi: 10.1088/1674-1137/33/4/011 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-06-05
Revised: 2008-07-30

Article Metric

Article Views(2829)
PDF Downloads(709)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design of a 450 MHz β=0.2 single spoke cavity at PKU

Corresponding author: LU Xiang-Yang,

Received Date: 2008-06-05

Accepted Date: 2008-07-30

Available Online: 2009-04-05

Abstract:

The design of a 450 MHz β=0.2 superconducting single spoke cavity has been finished at Peking University. A theoretical model and a numerical simulation are used to study the relationship between the RF performance and the geometric parameters of the cavity. In this paper, the optimization of the spoke cavity is described in detail. The RF simulation gives the optimum parameters E_pk/E_acc of 2.65 and B_pk/E_acc of 5.22 mT/(MV/m). The mechanical properties of the cavity are also studied. Two stiff ribs are used to offer a credible mechanical stability.

HTML

Reference (1)

Design of a 450 MHz β=0.2 single spoke cavity at PKU

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article