Active inductor shunt peaking in high-speed VCSEL driver design

LIANG Fu-Tian; GONG Datao; HOU Suen; LIU Chonghan; LIU Tiankuan; SU Da-Shung; TENG Ping-Kun; XIANG Annie; YE Jingbo; JIN Ge

doi:10.1088/1674-1137/37/11/116101

Chinese Physics C> 2013, Vol. 37> Issue(11) : 116101 DOI: 10.1088/1674-1137/37/11/116101

Active inductor shunt peaking in high-speed VCSEL driver design

Abstract
HTML
Reference
Related

PDF

Abstract：
An all-transistor active-inductor shunt-peaking structure has been used in a prototype of 8 Gbps high-speed VCSEL driver which is designed for the optical link in ATLAS liquid Argon calorimeter upgrade. The VCSEL driver is fabricated in a commercial 0.25 u m Silicon-on-Sapphire (SoS) CMOS process for radiation tolerant purpose. The all-transistor active-inductor shunt-peaking is used to overcome the bandwidth limitation from the CMOS process. The peaking structure has the same peaking effect as the passive one,but takes a small area,does not need linear resistors and can overcome the process variation by adjust the peaking strength via an external control. The design has been taped out,and the prototype has been proven by the preliminary electrical test results and bit error ratio test results. The driver achieves 8 Gbps data rate as simulated with the peaking. We present the all-transistor active-inductor shunt-peaking structure,simulation and test results in this paper.

References

[1]

Mazza G,Rivetti A,Moreira P et al. Journal of Instrumentation,2012,7(01): C01052[2] LIANG F,GONG D,HOU S et al. Journal of Instrumentation,2013,8(01): C01031[3] Lee T H. The Design of CMOS Radio-Frequency Integrated Circuits. Cambridge University Press,2004[4] Sackinger E,Fischer W C. Solid-State Circuits,IEEE Journal of,2000,35(12): 1884-1888

[1]	Jungbae Bahng , Eun-San Kim , Bong-Hyuk Choi . Design study of a radio-frequency quadrupole for high-intensity beams. Chinese Physics C, 2017, 41(7): 077002. doi: 10.1088/1674-1137/41/7/077002
[2]	Gang Xu , Yi Jiao , Yue-Mei Peng . ESRF-type lattice design and optimization for the High Energy Photon Source. Chinese Physics C, 2016, 40(2): 027001. doi: 10.1088/1674-1137/40/2/027001
[3]	Chun-Jie Wang , Zhen-An Liu , Jing-Zhou Zhao , Zhao Liu . Design of a high throughput electronics module for high energy physics experiments. Chinese Physics C, 2016, 40(6): 066102. doi: 10.1088/1674-1137/40/6/066102
[4]	Zheng-Feng Xiong , Cheng Cheng , Jian Yu , Huai-Bi Chen , Hui Ning . Switching speed effect of phase shift keying in SLED for generating high power microwaves. Chinese Physics C, 2016, 40(1): 017006. doi: 10.1088/1674-1137/40/1/017006
[5]	Ji-Feng Chen , Ke-Zhu Song , Jia-Cheng Liu . Dedicated 4πβ (LS)-γ (HPGe) digital coincidence system based on synchronous high-speed multichannel data acquisition. Chinese Physics C, 2016, 40(3): 036101. doi: 10.1088/1674-1137/40/3/036101
[6]	JIAO Yi , XU Gang . PEPX-type lattice design and optimization for the High Energy Photon Source. Chinese Physics C, 2015, 39(6): 067004. doi: 10.1088/1674-1137/39/6/067004
[7]	MI Zheng-Hui , ZHAO Dan-Yang , SUN Yi , PAN Wei-Min , LIN Hai-Ying , LU Xiang-Yang , QUAN Sheng-Wen , LUO Xing , LI Ming , YANG Xing-Fan , WANG Guang-Wei , DAI Jian-Ping , LI Zhong-Quan , MA Qiang , SHA Peng . Design and test of frequency tuner for a CAEP high power THz free-electron laser. Chinese Physics C, 2015, 39(2): 028102. doi: 10.1088/1674-1137/39/2/028102
[8]	WANG Jia-Jia , YE Mao , SHI Tan , CHANG Rui , QIAO Shan . Design of a high flux VUV beamline for low energy photons. Chinese Physics C, 2015, 39(4): 048001. doi: 10.1088/1674-1137/39/4/048001
[9]	YANG Xiao-Liang , LIU Zhong , LUO Min , LUO Guang-Yao , KANG Qiang , TAN Jie , WU Wei . Design of SC solenoid with high homogeneity. Chinese Physics C, 2014, 38(3): 037001. doi: 10.1088/1674-1137/38/3/037001
[10]	HUANG Wei-Ping , JIANG Kun , LI Cheng , TANG Ze-Bo , SHAO Ming , CHEN Hong-Fang , SUN Yong-Jie . Design of the photomultiplier tube bases for high dynamic range readout in WCDA. Chinese Physics C, 2013, 37(3): 036001. doi: 10.1088/1674-1137/37/3/036001
[11]	LI Yong-Ming , ZHU Feng , QUAN Sheng-Wen , Ali Nassiri , LIU Ke-Xin . The design of a five-cell high-current superconducting cavity. Chinese Physics C, 2012, 36(1): 74-79. doi: 10.1088/1674-1137/36/1/013
[12]	XIAO Chen , HE Yuan , LIU Yong , YUAN You-Jin , WANG Zhi-Jun , HE Shou-Bo , XU Meng-Xin , LI Chao , YUE Wei-Ming , CHANG Wei , ZHAO Hong-Wei , XIA Jia-Wen . Preliminary design and simulation of a 162.5 MHz high- intensity proton RFQ for an accelerator driven system. Chinese Physics C, 2011, 35(11): 1053-1058. doi: 10.1088/1674-1137/35/11/014
[13]	LI Bin-Kang , YANG Shao-Hua , GUO Ming-An , WANG Kui-Lu , XIA Jing-Tao , LUO Tong-Ding . Design of a very high frame rate camera based on an asynchronous CCD driving method. Chinese Physics C, 2011, 35(6): 572-575. doi: 10.1088/1674-1137/35/6/012
[14]	ZHANG Yi-Fei , LI Yan-Guo , WU Bo-Bing , ZHANG Yong-Jie , DONG Yong-Wei , SUN Jian-Chao , ZHAO Dong-Hua , XING Wen , CHAI Jun-Ying , KANG Shi-Xiu , SONG Li-Ming . A study of the active thermal control for the high energy detector on the HXMT. Chinese Physics C, 2011, 35(7): 638-641. doi: 10.1088/1674-1137/35/7/008
[15]	WANG Lei , LIU Xiao-Ning , WANG Can . A new shunt DC active filter of power supply in a steady high magnetic field facility. Chinese Physics C, 2011, 35(5): 494-499. doi: 10.1088/1674-1137/35/5/018
[16]	ZHANG Zhou-Li , ZHAO Hong-Wei , XU Zhe , ZHANG Sheng-Hu , ZHANG Cong , SUN Lie-Peng , MEI Li-Rong , SHEN Xiao-Kang . Study on shunt impedance and voltage distribution of 4-rod RFQ cavity. Chinese Physics C, 2010, 34(3): 398-401. doi: 10.1088/1674-1137/34/3/018
[17]	LIU Zhen-Chao . Design and study of a high-current 5-cell superconducting rf cavity. Chinese Physics C, 2010, 34(5): 603-605. doi: 10.1088/1674-1137/34/5/018
[18]	MA Qiao-Sheng , ZHANG Yun-Jian , DENG De-Rong , TAN Jie , LIU Zhong . Design of a high-efficiency C-band backward wave oscillator. Chinese Physics C, 2010, 34(7): 1016-1018. doi: 10.1088/1674-1137/34/7/016
[19]	RUAN Yu-Fang , XU Tao-Guang , FU Shi-Nian . Design and simulation of a beam position monitor for the high current proton linac. Chinese Physics C, 2009, 33(3): 240-244. doi: 10.1088/1674-1137/33/3/015
[20]	DENG Hai-Xiao , DAI Zhi-Min . Design of cascading two stages of high gain harmonic generation scheme based on Shanghai deep ultraviolet free electron laser. Chinese Physics C, 2008, 32(3): 236-242. doi: 10.1088/1674-1137/32/3/016

Access

Get Citation

LIANG Fu-Tian, GONG Datao, HOU Suen, LIU Chonghan, LIU Tiankuan, SU Da-Shung, TENG Ping-Kun, XIANG Annie, YE Jingbo and JIN Ge. Active inductor shunt peaking in high-speed VCSEL driver design[J]. Chinese Physics C, 2013, 37(11): 116101. doi: 10.1088/1674-1137/37/11/116101

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-01-30
Revised: 1900-01-01

Article Metric

Article Views(1980)
PDF Downloads(236)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Active inductor shunt peaking in high-speed VCSEL driver design

Corresponding author: JIN Ge,

Received Date: 2013-01-30

Accepted Date: 1900-01-01

Available Online: 2013-11-05

Abstract: An all-transistor active-inductor shunt-peaking structure has been used in a prototype of 8 Gbps high-speed VCSEL driver which is designed for the optical link in ATLAS liquid Argon calorimeter upgrade. The VCSEL driver is fabricated in a commercial 0.25 u m Silicon-on-Sapphire (SoS) CMOS process for radiation tolerant purpose. The all-transistor active-inductor shunt-peaking is used to overcome the bandwidth limitation from the CMOS process. The peaking structure has the same peaking effect as the passive one,but takes a small area,does not need linear resistors and can overcome the process variation by adjust the peaking strength via an external control. The design has been taped out,and the prototype has been proven by the preliminary electrical test results and bit error ratio test results. The driver achieves 8 Gbps data rate as simulated with the peaking. We present the all-transistor active-inductor shunt-peaking structure,simulation and test results in this paper.

HTML

Reference (1)

Active inductor shunt peaking in high-speed VCSEL driver design

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article