A CW superconducting linac as the proton driver for a medium baseline neutrino beam in China

LI Zhi-Hui; TANG Jing-Yu

doi:10.1088/1674-1137/38/12/127001

Chinese Physics C> 2014, Vol. 38> Issue(12) : 127001 DOI: 10.1088/1674-1137/38/12/127001

A CW superconducting linac as the proton driver for a medium baseline neutrino beam in China

LI Zhi-Hui ^, ,
TANG Jing-Yu ^,

Abstract
HTML
Reference
Related

PDF

Abstract：
In a long-term planning for neutrino experiments in China, a medium baseline neutrino beam is proposed which uses a continue wave (CW) superconducting linac of 15 MW in beam power as the proton driver. The linac will be based on the technologies which are under development by the China-ADS project, namely it is also composed of a 3.2 MeV normal conducting RFQ and five different types of superconducting cavities. However, the design philosophy is quite different from the China-ADS linac because of the much weaker requirement on reliability here. The nominal design energy and current are 1.5 GeV and 10 mA, respectively. The general considerations and preliminary results on the physics design will be presented here. In addition, the alternative designs such as 2.0 GeV and 2.5 GeV, which may be required by the general design, can be easily extended from the nominal one.

[1]	Yingjie Fan , Xuewen Liu , Ning Zhou . Characterizing the CJPL’s site-specific neutrino floor as the neutrino fog boundary. Chinese Physics C, 2025, 49(10): 103001. doi: 10.1088/1674-1137/ade65e
[2]	Hong-Lei Li , Peng-Cheng Lu , Cong-Feng Qiao , Zong-Guo Si , Ying Wang . Study of the Standard Model and Majorana neutrino contributions to ${ B}^{{ +}} { \to} { K}^{{ (*){ \pm}}}{ \mu}^{ +}{ \mu}^{{ \mp}}$. Chinese Physics C, 2019, 43(2): 023101. doi: 10.1088/1674-1137/43/2/023101
[3]	HUANG Jiang , XIONG Yong-Qian , CHEN De-Zhi , LIU Kai-Feng , YANG Jun , LI Dong , YU Tiao-Qin , FAN Ming-Wu , YANG Bo . A permanent magnet electron beam spread system used fora low energy electron irradiation accelerator. Chinese Physics C, 2014, 38(10): 107008. doi: 10.1088/1674-1137/38/10/107008
[4]	FAN Ping , YUAN Da-Qing , ZUO Yi , ZHENG Yong-Nan , ZHOU Dong-Mei , WU Xiao-Guang , LI Guang-Sheng , ZHU Li-Hua , XU Guo-Ji , FAN Qi-Wen , ZHANG Xi-Zhen , ZHU Sheng-Yun . Proton alignment in ⁸²Sr investigated by g-factor measurements. Chinese Physics C, 2009, 33(S1): 206-208. doi: 10.1088/1674-1137/33/S1/066
[5]	Guo Hua . In-medium QMC Model Parameters and Quark Condensation in Nuclear Matter. Chinese Physics C, 1999, 23(5): 459-468.
[6]	WANG Man , LI Jin , CUI Xiang-Zong , XIA Xiao-Mi , LAI Yuan-Fen , YAO Xiao-Guang . PROTOTYPE OF END CAP SHOWER COUNTERAND ITS BEAM TEST. Chinese Physics C, 1987, 11(3): 321-326.

Access

Get Citation

LI Zhi-Hui and TANG Jing-Yu. A CW superconducting linac as the proton driver for a medium baseline neutrino beam in China[J]. Chinese Physics C, 2014, 38(12): 127001. doi: 10.1088/1674-1137/38/12/127001

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2014-01-02
Revised: 2014-01-02

Article Metric

Article Views(2716)
PDF Downloads(313)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

A CW superconducting linac as the proton driver for a medium baseline neutrino beam in China

LI Zhi-Hui ^,
TANG Jing-Yu ^,

Corresponding author: LI Zhi-Hui,

Corresponding author: TANG Jing-Yu,

Received Date: 2014-01-02
Accepted Date: 2014-01-02
Available Online: 2014-12-05

Abstract: In a long-term planning for neutrino experiments in China, a medium baseline neutrino beam is proposed which uses a continue wave (CW) superconducting linac of 15 MW in beam power as the proton driver. The linac will be based on the technologies which are under development by the China-ADS project, namely it is also composed of a 3.2 MeV normal conducting RFQ and five different types of superconducting cavities. However, the design philosophy is quite different from the China-ADS linac because of the much weaker requirement on reliability here. The nominal design energy and current are 1.5 GeV and 10 mA, respectively. The general considerations and preliminary results on the physics design will be presented here. In addition, the alternative designs such as 2.0 GeV and 2.5 GeV, which may be required by the general design, can be easily extended from the nominal one.