A waveguide overloaded cavity kicker for the HLSⅡ longitudinal feedback system

LI Wu-Bin; ZHOU Ze-Ran; SUN Bao-Gen; WU Fang-Fang; XU Wei; LU Ping; YANG Yong-Liang

doi:10.1088/1674-1137/38/3/037003

Chinese Physics C> 2014, Vol. 38> Issue(3) : 037003 DOI: 10.1088/1674-1137/38/3/037003

A waveguide overloaded cavity kicker for the HLSⅡ longitudinal feedback system

Abstract
HTML
Reference
Related

PDF

Abstract：
In the upgrade project of Hefei Light Source (HLSⅡ), a new digital longitudinal bunch-by-bunch feedback system will be developed to suppress the coupled bunch instabilities in the storage ring effectively. We design a new waveguide overloaded cavity longitudinal feedback kicker as the feedback actuator. The beam pipe of the kicker is a racetrack shape so as to avoid a transition part to the octagonal vacuum chamber. The central frequency and the bandwidth of the kicker have been simulated and optimized to achieve design goals by the HFSS code. A higher shunt impedance can be obtained by using a nose cone to reduce the feedback power requirement. Before the kicker cavity was installed in the storage ring, a variety of measurements were carried out to check its performance. All these results of simulation and measurement are presented.

References

[1]

Gallo A, Boni R, Ghigo et al. Particle Accelerator, 1996, 52: 95-113[2] Kim Yujong, Kwon M, HUANG J et al. IEEE Transactions on Nuclear Science, 2000, 47(2): 452-467[3] WU W Z, Kim Y, LI J Y et al. Nuclear Instruments and Methods in Physics Research A, 2011, 632: 32-42[4] Khan S, Knuth T, Gallo A et al. Proceedings of PAC 1999. New York, 1999. 1147-1149[5] Lau W K, CHANG L H, CHEN C W et al. Proceedings of PAC. Knoxville, Tennessee, 2005. 949-951[6] XU Wei, WU W Z, HE Duo-Hui et al. Chinese Physics C (HEP NP), 2013, 37(3): 037003[7] Pedersen Flemming. Lecture Notes in Physics, 1994, 425: 269-292[8] XU Wei, Design of a Longitudinal Feedback Kicker and Beam Experimental Studies Based on Transverse Feedback System in the Storage Ring (Ph. D Thesis). University of Science and Technology of China, 2013.[9] CHANG L H, Lau W K, YANG T T et al. Proceedings of EPAC 1998. Stockholm, 1998. 1708-1710[10] Heurich N, Hillert W, Roth A et al. Proceedings of IPAC 2011. San Sebastian, Spain, 2011. 484-486[11] Maier L C, Slater J C. Journal of Applied Physics, 1952, 23(1): 68-77[12] Gaspers F, Dome G. Proceedings of the Precision Electromagnetic Measurements Conference. Delft, Netherlands, 1984. 20-24

Access

Get Citation

LI Wu-Bin, ZHOU Ze-Ran, SUN Bao-Gen, WU Fang-Fang, XU Wei, LU Ping and YANG Yong-Liang. A waveguide overloaded cavity kicker for the HLSⅡ longitudinal feedback system[J]. Chinese Physics C, 2014, 38(3): 037003. doi: 10.1088/1674-1137/38/3/037003

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-05-21
Revised: 2013-06-27

Article Metric

Article Views(3775)
PDF Downloads(265)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

A waveguide overloaded cavity kicker for the HLSⅡ longitudinal feedback system

Corresponding author: LI Wu-Bin,

Corresponding author: SUN Bao-Gen,

Received Date: 2013-05-21
Accepted Date: 2013-06-27
Available Online: 2014-03-05

Abstract: In the upgrade project of Hefei Light Source (HLSⅡ), a new digital longitudinal bunch-by-bunch feedback system will be developed to suppress the coupled bunch instabilities in the storage ring effectively. We design a new waveguide overloaded cavity longitudinal feedback kicker as the feedback actuator. The beam pipe of the kicker is a racetrack shape so as to avoid a transition part to the octagonal vacuum chamber. The central frequency and the bandwidth of the kicker have been simulated and optimized to achieve design goals by the HFSS code. A higher shunt impedance can be obtained by using a nose cone to reduce the feedback power requirement. Before the kicker cavity was installed in the storage ring, a variety of measurements were carried out to check its performance. All these results of simulation and measurement are presented.