Beam transport design for a 1 MeV prototype dielectric wall accelerator

ZHU Jun; ZHANG Huang; PENG Shi-Xiang; REN Hai-Tao; XIA Lian-Sheng; WANG Wen-Dou; YANG Zhi-Yong; SHEN Yi; SHI Jin-Shui; ZHANG Lin-Wen; DENG Jian-Jun

doi:10.1088/1674-1137/38/4/047001

Chinese Physics C> 2014, Vol. 38> Issue(4) : 047001 DOI: 10.1088/1674-1137/38/4/047001

Beam transport design for a 1 MeV prototype dielectric wall accelerator

Abstract
HTML
Reference
Related

PDF

Abstract：
The beam transport design of a novel proton dielectric wall accelerator is introduced in this paper. The protons will be accelerated from 40 keV to nearly 1 MeV under an accelerating gradient that is as high as 20 MV/m. A consideration of the beam line as well as the transport simulation is presented. The influences of the injection timing jitter and the accelerating pulse timing jitter are also discussed.

References

[1]

Wilson R R. Radiology, 1946, 47: 487[2] Koji Noda. Proceedings of IPAC2011. San Sebastian, Spain, 2011, 3784[3] Caporaso G J, Sampayan S, CHEN Y J et al. Proceedings of PAC07. Albuqurque, New Mexico, USA, 2007, 857[4] Humphries S. Principle of Charged Particle Acceleration. University of New Mexico, Albuquerque, NM, 1999. 283[5] ZHU Jun, XIA Lian-Sheng, CHEN Si-Fu et al. High Power Laser and Particle Beams, 2012, 24(6): 1449 (in Chinese)[6] ZHANG Lin-Wen, LAI Qin-Gui, WANG Wen-Dou et al. Proceedings of IPAC2011. San Sebastian, Spain, 2011, 2769[7] CHEN Y J, Caporaso G J, Blackfield D T et al. Proceedings of LINAC2010. Tsukuba, Japan, 2010, 941[8] Zografos A, Brown T, Hening A et al. Proceedings of IPAC2011. San Sebastian, Spain, 2011, 3636

Access

Get Citation

ZHU Jun, ZHANG Huang, PENG Shi-Xiang, REN Hai-Tao, XIA Lian-Sheng, WANG Wen-Dou, YANG Zhi-Yong, SHEN Yi, SHI Jin-Shui, ZHANG Lin-Wen and DENG Jian-Jun. Beam transport design for a 1 MeV prototype dielectric wall accelerator[J]. Chinese Physics C, 2014, 38(4): 047001. doi: 10.1088/1674-1137/38/4/047001

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-04-01
Revised: 1900-01-01

Article Metric

Article Views(3439)
PDF Downloads(195)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Beam transport design for a 1 MeV prototype dielectric wall accelerator

Corresponding author: ZHU Jun,

Received Date: 2013-04-01
Accepted Date: 1900-01-01
Available Online: 2014-04-05

Abstract: The beam transport design of a novel proton dielectric wall accelerator is introduced in this paper. The protons will be accelerated from 40 keV to nearly 1 MeV under an accelerating gradient that is as high as 20 MV/m. A consideration of the beam line as well as the transport simulation is presented. The influences of the injection timing jitter and the accelerating pulse timing jitter are also discussed.