Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac

ZHU Hong-Yan; DONG Lan; LI Bo

doi:10.1088/1674-1137/38/8/087001

Chinese Physics C> 2014, Vol. 38> Issue(8) : 087001 DOI: 10.1088/1674-1137/38/8/087001

Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac

Abstract
HTML
Reference
Related

PDF

Abstract：
This paper introduces the design and simulation of a Wire Position Monitor (WPM) used in the cryogenic system of an Accelerator Driven System (ADS). The WPM is designed to monitor the contraction of cold masses during the cooling-down operation. In this paper, POISSON-2D electrostatic field software is used to calculate the best characteristic impedance for the WPM. Furthermore, the time domain signal of different end structures is theoretically analyzed and simulated. The coupling of electrodes and the influence of signal carrier size, which may influence the induced signal, are also discussed. Finally, the linearity of the induced voltage and the sensitivity of the WPM are analyzed. The time domain simulation results are consistent with the theoretical analysis. The influences of the coupling and carrier size are very small, and the linearity of the normalized voltage is good within r/2.

References

[1]

Gassner G. Experience Report with the Alignment Diagnostic System. SLAC Stanford. 2010[2] YUAN Ren-Xian. Study and Application of Beam Position Measurement. Beijing. IHEP. 2004[3] Deibele C. Synthesis and Considerations for Optimally Matching to a Beam Position Monitor Circuit Impedance, SNS-NOTE-DIAG-31[4] Bosotti A, Pagani C, Varisco G. On Line Monitoring of the TTF Cryostats Cold Mass with Wire Position Monitors. INFN/TC-00/02 (Mar 17, 2000)[5] Giove D, Bosotti A, Pagani C. A Wire Position Monitor (WPM) System to Control the Cold Mass Movements Inside the TRF Cryomodule. Particle Accelerator Conference. 1997[6] Shafer R E. Beam Position Monitor Sensitivity for Low-beta Beams. AIP Conference Proceedings 319. New York: American Institute of Physics, 1994. 303-308[7] Peter Forck, PiotrKowina, Dmitry Liakin. Beam position monitor. Helmholtz Centre for Heavy Ion Research GSI. Germany. 2008

[1]	Yong Zhang , Jun-Xia Wu , Guang-Yu Zhu , Huan Jia , Zong-Heng Xue , Hai Zheng , Hong-Ming Xie , Xin-Cai Kang , Yuan He , Lin Li , Jean Claude Denard . Capacitive beam position monitors for the low-β beam of the Chinese ADS proton linac. Chinese Physics C, 2016, 40(2): 027003. doi: 10.1088/1674-1137/40/2/027003
[2]	SHI Ai-Min , SUN Lie-Peng , ZHANG Zhou-Li , XU Xian-Bo , SHI Long-Bo , LI Chen-Xing , WANG Wen-Bin . Design of the new couplers for C-ADS RFQ. Chinese Physics C, 2015, 39(4): 047004. doi: 10.1088/1674-1137/39/4/047004
[3]	MENG Cai , TANG Jing-Yu , PEI Shi-Lun , YAN Fang . Mismatch study of C-ADS main linac. Chinese Physics C, 2015, 39(9): 097002. doi: 10.1088/1674-1137/39/9/097002
[4]	XIE Hong-Ming , WU Jun-Xia , ZHANG Yong , ZHU Guang-Yu , XIA Jia-Wen , YE Min-You . Beam experiments with a non-intercepting beam induced fluorescence profile monitor for the ADS LINAC. Chinese Physics C, 2015, 39(11): 117004. doi: 10.1088/1674-1137/39/11/117004
[5]	ZOU Jun-Ying , WU Fang-Fang , YANG Yong-Liang , SUN Bao-Gen , ZHOU Ze-Ran , LUO Qing , LU Ping , XU Hong-Liang . A new measurement method for electrode gain in an orthogonally symmetric beam position monitor. Chinese Physics C, 2014, 38(12): 127002. doi: 10.1088/1674-1137/38/12/127002
[6]	YAN Fang , LI Zhi-Hui , MENG Cai , TANG Jing-Yu , SUN Biao . Physics design for the C-ADS main linac based on two different injector design schemes. Chinese Physics C, 2014, 38(2): 027004. doi: 10.1088/1674-1137/38/2/027004
[7]	SUN Lie-Peng , ZHAO Hong-Wei , SUN Zhou-Ping , HE Yuan , SHI Ai-Min , XIAO Chen , DU Xiao-Nan , ZHANG Cong , ZHANG Zhou-Li . Design study of the SSC-LINAC re-buncher. Chinese Physics C, 2013, 37(2): 027002. doi: 10.1088/1674-1137/37/2/027002
[8]	WU Dai , YANG Ren-Jun , BAI Wei , LI Peng , LI Ming , YANG Xing-Fan . Design study of an improved laser wire system for electron beam measurement. Chinese Physics C, 2013, 37(10): 108101. doi: 10.1088/1674-1137/37/10/108101
[9]	SU Jia-Hang , DU Ying-Chao , HUA Jian-Fei , ZHENG Shu-Xin , QIU Jia-Qi , YANG Jin , HUANG Wen-Hui , CHEN Huai-Bi , TANG Chuan-Xiang . Design and cold test of a rectangular cavity beam position monitor. Chinese Physics C, 2013, 37(1): 017002. doi: 10.1088/1674-1137/37/1/017002
[10]	ZHAO Wei , TANG Xiao , SHI Rong-Jian , HOU Mi . Coupler design for an L-band electron linac. Chinese Physics C, 2012, 36(8): 765-768. doi: 10.1088/1674-1137/36/8/015
[11]	TIAN Jian-Min , XU Mei-Hang , ZHAO Zhong-Liang , CHEN Chang , RUAN Xiang-Dong , CHEN Yuan-Bo , XU Tao-Guang , LU Shuang-Tong . Improved design and construction of an ionization chamber for the CSNS beam loss monitor (BLM). Chinese Physics C, 2012, 36(4): 329-333. doi: 10.1088/1674-1137/36/4/006
[12]	KE Zun-Jian , LI Jia-Cai , ZHANG Shao-Ping , AN Guang-Peng , TANG Xing-Hua , YANG Tao . A plastic scintillating fiber position detector in vacuum for the test beam facility at BEPCⅡ-LINAC. Chinese Physics C, 2012, 36(1): 67-70. doi: 10.1088/1674-1137/36/1/011
[13]	WANG Zhi-Jun , HE Yuan , LIU Yong , YUE Wei-Ming , YANG Xiao-Liang , WU Wei , LI Chao , XIAO Chen , JIA Huan . The design simulation of the superconducting section in the ADS injector Ⅱ. Chinese Physics C, 2012, 36(3): 256-260. doi: 10.1088/1674-1137/36/3/012
[14]	LI Xiang , ZHENG Shu-Xin . Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor. Chinese Physics C, 2011, 35(1): 79-82. doi: 10.1088/1674-1137/35/1/016
[15]	LI Xiang , ZHENG Shu-Xin . Simulation and experiments for the Q_ext of a cavity beam position monitor. Chinese Physics C, 2010, 34(3): 405-408. doi: 10.1088/1674-1137/34/3/020
[16]	RUAN Yu-Fang , HAN Lu-Xiang , LIU Hua-Chang , ZHANG Hua-Shun , XU Tao-Guang , FU Shi-Nian . Design and simulation of a wire scanner for the CSNS linac. Chinese Physics C, 2010, 34(10): 1655-1660. doi: 10.1088/1674-1137/34/10/020
[17]	RUAN Yu-Fang , XU Tao-Guang , FU Shi-Nian . Design and simulation of a beam position monitor for the high current proton linac. Chinese Physics C, 2009, 33(3): 240-244. doi: 10.1088/1674-1137/33/3/015
[18]	CHU Jian-Hua , TONG De-Chun , ZHAO Zhen-Tang . RF measurements of a C-band cavity beam position monitor. Chinese Physics C, 2008, 32(5): 385-388. doi: 10.1088/1674-1137/32/5/012
[19]	ZHANG Lei , MA Hui-Zhou , YUE Jun-Hui , LEI Ge , CAO Jian-She , MA Li . Design of BEPCⅡ bunch current monitor system. Chinese Physics C, 2008, 32(3): 218-221. doi: 10.1088/1674-1137/32/3/012
[20]	SUI Yan-Feng , MA Hui-Zhou , CAO Jian-She , MA Li . Design and simulation of the wire scanner for the injector linac of BEPCⅡ. Chinese Physics C, 2008, 32(5): 397-399. doi: 10.1088/1674-1137/32/5/015

Access

Get Citation

ZHU Hong-Yan, DONG Lan and LI Bo. Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac[J]. Chinese Physics C, 2014, 38(8): 087001. doi: 10.1088/1674-1137/38/8/087001

ZHU Hong-Yan, DONG Lan and LI Bo. Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac[J]. Chinese Physics C, 2014, 38(8): 087001. doi: 10.1088/1674-1137/38/8/087001 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2013-10-09
Revised: 2014-01-25

Article Metric

Article Views(1760)
PDF Downloads(119)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac

Corresponding author: ZHU Hong-Yan,

Received Date: 2013-10-09

Accepted Date: 2014-01-25

Available Online: 2014-08-05

Abstract: This paper introduces the design and simulation of a Wire Position Monitor (WPM) used in the cryogenic system of an Accelerator Driven System (ADS). The WPM is designed to monitor the contraction of cold masses during the cooling-down operation. In this paper, POISSON-2D electrostatic field software is used to calculate the best characteristic impedance for the WPM. Furthermore, the time domain signal of different end structures is theoretically analyzed and simulated. The coupling of electrodes and the influence of signal carrier size, which may influence the induced signal, are also discussed. Finally, the linearity of the induced voltage and the sensitivity of the WPM are analyzed. The time domain simulation results are consistent with the theoretical analysis. The influences of the coupling and carrier size are very small, and the linearity of the normalized voltage is good within r/2.

HTML

Reference (1)

Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article