Point spread function modeling and image restoration for cone-beam CT

ZHANG Hua; HUANG Kui-Dong; SHI Yi-Kai; XU Zhe

doi:10.1088/1674-1137/39/3/038202

Chinese Physics C> 2015, Vol. 39> Issue(3) : 038202 DOI: 10.1088/1674-1137/39/3/038202

Point spread function modeling and image restoration for cone-beam CT

Abstract
HTML
Reference
Related

PDF

Abstract：
X-ray cone-beam computed tomography (CT) has such notable features as high efficiency and precision, and is widely used in the fields of medical imaging and industrial non-destructive testing, but the inherent imaging degradation reduces the quality of CT images. Aimed at the problems of projection image degradation and restoration in cone-beam CT, a point spread function (PSF) modeling method is proposed first. The general PSF model of cone-beam CT is established, and based on it, the PSF under arbitrary scanning conditions can be calculated directly for projection image restoration without the additional measurement, which greatly improved the application convenience of cone-beam CT. Secondly, a projection image restoration algorithm based on pre-filtering and pre-segmentation is proposed, which can make the edge contours in projection images and slice images clearer after restoration, and control the noise in the equivalent level to the original images. Finally, the experiments verified the feasibility and effectiveness of the proposed methods.

References

[1]

LI L S, ZENG L, QIU C J et al. Insight, 2012, 54: 544-550[2] YU W, ZENG L, YANG X Y. Insight, 2014, 56: 69-74[3] Kasap S, Frey J B, Belev G et al. Sensors, 2011, 11: 5112-5157[4] WANG Y X, TIAN W J, WANG L et al. Acta Photonica Sin., 2005, 34: 923-926[5] Fujita H, Tsai D Y, Itoh T et al. IEEE Trans. Med. Imaging, 1992, 11: 34-39[6] Olson J T, Espinola R L, Jacobs E L. Opt. Eng., 2007, 46: 016403[7] JIANG X G, TAN Z, LI Z R et al. High Power Laser and Particle Beams, 2004, 16: 296-300[8] RONG J Y, FU G T, WEI C F et al. Chinese Physics C, 2010, 34: 412-416[9] WANG Y F, QUE J M, CAO D Q et al. Chinese Physics C, 2013, 37: 078202[10] FENG B, CHEN M, BAI B et al. IEEE Trans. Nucl. Sci., 2010, 57: 173-180[11] SONG G Z, MA J M, WANG K L et al. Acta Phys. Sin., 2012, 61: 102902[12] XIAO W, YAN H, GUO W. Nucl. Instrum. Methods Phys. Res. Sect. A, 2008, 586: 367-371[13] Mignotte M. Pattern Recognition Letters, 2008, 29: 2206-2212[14] Hashemi S, Kiani S, Noroozi N et al. Pattern Recognition Letters, 2010, 31: 1816-1824[15] Khan A, YIN H. Lecture Notes in Computer Science, 2011, 6936: 144-151[16] ZHANG L, BU K, HUANG K D et al. Chinese Journal of Scientific Instrument, 2012, 33: 2061-2066[17] LIANG L H, GUO W M, LU H N. Optical Technique, 2005, 31: 630-632[18] Lucy L B. Astronomical Journal, 1974, 79: 745-754[19] Richardson W H. J Opt Soc Am, 1972, 62: 55-59[20] Buades A, Coll B, Morel J M. Proc. IEEE Computer Society Conference on Computer Vision and Pattern Recognition, 2005, 2: 60-65[21] HUANG K D, ZHANG D H, WANG K. Proc. 6th SPIE International Symposium on Multispectral Image Processing and Pattern Recognition, 2009, 7497: 749711[22] HUANG K D, ZHANG D H, LI M J et al. Applied Mechanics and Materials, 2012, 229-231: 1819-1822[23] LI M J, ZHANG D H, HUANG K D et al. Acta Armamentarii, 2010, 31: 1455-1460[24] ZHANG H, HUANG K D, SHI Y K et al. CT Theory and Applications, 2012, 21: 247-254[25] HUANG K D, ZHANG D H, LI M J et al. Acta Phys. Sin., 2013, 62: 210702

[1]	Qi Chen , De-fu Hou . HTL resummation in the light cone gauge. Chinese Physics C, 2018, 42(4): 043102. doi: 10.1088/1674-1137/42/4/043102
[2]	Ju Guan , Li-Ming Song , Zhuo-Xi Huo . Application of a multiscale maximum entropy image restoration algorithm to HXMT observations. Chinese Physics C, 2016, 40(8): 086203. doi: 10.1088/1674-1137/40/8/086203
[3]	Kui-Dong Huang , Zhe Xu , Ding-Hua Zhang , Hua Zhang , Wen-Long Shi . Robust scatter correction method for cone-beam CT using an interlacing-slit plate. Chinese Physics C, 2016, 40(6): 068202. doi: 10.1088/1674-1137/40/6/068202
[4]	LI Lin , FANG Wen-Cheng , WANG Chao-Peng , GU Qiang . Modeling and analysis of SLED. Chinese Physics C, 2015, 39(4): 047002. doi: 10.1088/1674-1137/39/4/047002
[5]	WANG Sheng-Hao , ZHANG Kai , WANG Zhi-Li , GAO Kun , WU Zhao , ZHU Pei-Ping , WU Zi-Yu . A user-friendly nano-CT image alignment and 3D reconstruction platform based on LabVIEW. Chinese Physics C, 2015, 39(1): 018001. doi: 10.1088/1674-1137/39/1/018001
[6]	HUANG Jiang , XIONG Yong-Qian , CHEN De-Zhi , LIU Kai-Feng , YANG Jun , LI Dong , YU Tiao-Qin , FAN Ming-Wu , YANG Bo . A permanent magnet electron beam spread system used fora low energy electron irradiation accelerator. Chinese Physics C, 2014, 38(10): 107008. doi: 10.1088/1674-1137/38/10/107008
[7]	YANG Min , WANG Xiao-Long , LIU Yi-Peng , MENG Fan-Yong , LI Xing-Dong , LIU Wen-Li , WEI Dong-Bo . Automatic calibration method of voxel size for cone-beam 3D-CT scanning system. Chinese Physics C, 2014, 38(4): 046202. doi: 10.1088/1674-1137/38/4/046202
[8]	WEI Tao , YANG Guo-Jun , LONG Ji-Dong , SHI Jin-Shui . Image blur in high energy proton radiography. Chinese Physics C, 2013, 37(6): 068201. doi: 10.1088/1674-1137/37/6/068201
[9]	WANG Yan-Fang , UE Jie-Min , CAO Da-Quan , SUN Cui-Li , ZHAO Wei , WEI Cun-Feng , SHI Rong-Jian , WEI Long . Measurement of the spatial resolution and the relative density resolution in an industrial cone-beam micro computed tomography system. Chinese Physics C, 2013, 37(7): 078202. doi: 10.1088/1674-1137/37/7/078202
[10]	XIE Shi-Peng , LUO Li-Min . Scatter correction for cone-beam computedtomography using self-adaptive scatterkernel superposition. Chinese Physics C, 2012, 36(6): 566-572. doi: 10.1088/1674-1137/36/6/015
[11]	ZHAO Wei , FU Guo-Tao , SUN Cui-Li , WANG Yan-Fang , WEI Cun-Feng , CAO Da-Quan , QUE Jie-Min , TANG Xiao , SHI Rong-Jian , WEI Long , YU Zhong-Qiang . Beam hardening correction for a cone-beam CT system and its effect on spatial resolution. Chinese Physics C, 2011, 35(10): 978-985. doi: 10.1088/1674-1137/35/10/018
[12]	L. Ya. Glozman . Chiral symmetry restoration in excited hadrons and dense matter. Chinese Physics C, 2010, 34(9): 1212-1217. doi: 10.1088/1674-1137/34/9/012
[13]	LIANG Li-Zhen , HU Chun-Dong , XIE Yuan-Lai , XIE Ya-Hong , NBI-Team . Modeling process of the neutral beam re-ionization loss. Chinese Physics C, 2010, 34(7): 972-977. doi: 10.1088/1674-1137/34/7/008
[14]	YANG Min , JIN Xu-Ling , LI Bao-Lei . A new method to determine the projected coordinate origin of a cone-beam CT system using elliptical projection. Chinese Physics C, 2010, 34(10): 1665-1670. doi: 10.1088/1674-1137/34/10/022
[15]	NIE Yuan-Cun , LU Yuan-Rong , CHEN Jia-Er , YAN Xue-Qing , GUO Zhi-Yu , ZHU Kun , FANG Jia-Xun . Beam dynamics and RF design of trapezoidal IH-RFQ with low energy spread. Chinese Physics C, 2009, 33(S2): 105-108. doi: 10.1088/1674-1137/33/S2/027
[16]	LI Quan-Feng , CHENG Cheng , YAN Hui-Yong , DU Tai-Bin , CHEN Huai-Bi . Study of X-Rays Generated by Target in CT. Chinese Physics C, 2006, 30(10): 1032-1035.
[17]	LI Liang , CHEN Zhi-Qiang , ZHANG Li , XING Yu-Xiang , KANG Ke-Jun . A New Cone-Beam X-Ray CT System with a Reduced Size Planar Detector. Chinese Physics C, 2006, 30(8): 812-817.
[18]	YU Neng-Jie , TANG Chuan-Xiang , ZHENG Shu-Xin , LI Quan-Feng , GONG Ke . 2-D Beam Profile Measurement Based on CT Algorithm with Rotating Multi-Wire Target. Chinese Physics C, 2005, 29(4): 408-412.
[19]	ZENG Gang , LIU Li , QUE Jie-Min , ZHANG Ying-Ping , YIN Yin , WANG Yan-Fang , YU Zhong-Qiang , YAN Yong-Lian . Uniformity Calibration for ICT Image. Chinese Physics C, 2004, 28(10): 1131-1134.
[20]	Mao Naifeng , Li Zenghai . Spline Function Representation For Transformation of Beam Phase Space With Arbitrary Contours. Chinese Physics C, 1989, 13(S2): 149-156.

Access

Get Citation

ZHANG Hua, HUANG Kui-Dong, SHI Yi-Kai and XU Zhe. Point spread function modeling and image restoration for cone-beam CT[J]. Chinese Physics C, 2015, 39(3): 038202. doi: 10.1088/1674-1137/39/3/038202

ZHANG Hua, HUANG Kui-Dong, SHI Yi-Kai and XU Zhe. Point spread function modeling and image restoration for cone-beam CT[J]. Chinese Physics C, 2015, 39(3): 038202. doi: 10.1088/1674-1137/39/3/038202 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2014-05-09
Revised: 1900-01-01

Article Metric

Article Views(1794)
PDF Downloads(212)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Point spread function modeling and image restoration for cone-beam CT

Corresponding author: HUANG Kui-Dong,

Received Date: 2014-05-09

Accepted Date: 1900-01-01

Available Online: 2015-03-05

Abstract: X-ray cone-beam computed tomography (CT) has such notable features as high efficiency and precision, and is widely used in the fields of medical imaging and industrial non-destructive testing, but the inherent imaging degradation reduces the quality of CT images. Aimed at the problems of projection image degradation and restoration in cone-beam CT, a point spread function (PSF) modeling method is proposed first. The general PSF model of cone-beam CT is established, and based on it, the PSF under arbitrary scanning conditions can be calculated directly for projection image restoration without the additional measurement, which greatly improved the application convenience of cone-beam CT. Secondly, a projection image restoration algorithm based on pre-filtering and pre-segmentation is proposed, which can make the edge contours in projection images and slice images clearer after restoration, and control the noise in the equivalent level to the original images. Finally, the experiments verified the feasibility and effectiveness of the proposed methods.

HTML

Reference (1)

Point spread function modeling and image restoration for cone-beam CT

Abstract：

References

Access

Article Metrics

Metrics

通讯作者: 陈斌, bchen63@163.com

Email This Article