-
The isotropic SGWB is characterized by the GW power spectral density
$ \Omega_{\rm{GW}}(\nu) $ , which is a dimensionless quantity describing the GW energy density per logarithmic frequency interval,$ \Omega_{\rm{GW}}(\nu)\equiv\frac{1}{\rho_{\rm c}}\frac{{\rm d } \rho_{\rm{GW}} }{{\rm d}\ln \nu} = \frac{\nu}{\rho_{\rm c}}\frac{{\rm d}\rho_{\rm{GW}}}{{\rm d}\nu}\,\,\,, $
(2.1) where
$ \rho_{\rm c} = 3H_0^2/(8\pi G) $ is the critical energy density of the universe.$ H_0 $ and G are the Hubble constant and gravitational constant, respectively. Here,$ \rho_{\rm{GW}} $ is the energy density of the GW, and ν is the frequency of the GW observed today.The GW power spectral density consists of GW radiation emitted throughout the entire history of the universe. For the SGWB generated by ABH-PBH mergers,
$ \Omega_{\rm{GW}} $ can be written as an integral over the redshift:$ \Omega_{\rm{GW}}(\nu) = \frac{\nu}{\rho_{\rm c}H_0}\int_{0}^{z_{\max}} {\rm d}z~\frac{R_{\rm{AP}}(z)}{(1+z)^4E(z)} \frac{{\rm d}E_{\rm{GW}}}{{\rm d}\nu_s}(\nu_s) \,\,\,. $
(2.2) Here,
$ \dfrac{{\rm d}E_{\rm{GW}}}{{\rm d}\nu_s}(\nu_s) $ is the GW radiation energy spectrum of the source,$ \nu_s $ is the GW frequency at the time of the ABH-PBH merger, and it is related to the frequency at observation as$ \nu_s = (1+z)\nu $ .$ R_{\rm{AP}}(z) $ is the ABH-PBH merger rate,$ {\rm i.e.,}\; $ the number of mergers per physical volume per cosmological time. At last,$ E(z) $ is related to the Hubble parameter as$ E(z)\equiv H(z)/H_0 $ .Therefore, the calculation of
$ \Omega_{\rm{GW}}(\nu) $ boils down to the GW radiation energy spectrum for each ABH-PBH merger$ {\rm d}E_{\rm{GW}}/{\rm d}\nu_s $ and the merger rate$ R_{\rm{AP}}({z}) $ . We present details on how they are calculated in the later sections. Notice that we impose an upper limit on redshift,$ z_{\rm{max}} $ , in the integral. This is because while PBHs can be formed at very large redshift deeply within the radiation-dominated epoch, ABHs can only appear after stars in galaxies have formed. Therefore$ z_{\rm{max}} $ refers to the maximal redshift beyond which there is effectively no ABH and consequently no ABH-PBH merger. -
The evolution of a binary merger can be described by three phases: the inspiral, the merger, and the ringdown. While the GW radiation from the early inspiral and ringdown phases can be approximated analytically by the post-Newtonian expansion and the perturbation theory, modeling the late inspiral and merger requires solving the Einstein equations numerically. Using the hybrid GW waveform for non-spinning binaries presented in Ref. [48], the GW energy spectrum can be written as
$ \frac{{{\rm d}{E_{{\rm{GW}}}}}}{{{\rm d}{\nu _s}}} = \frac{{{{(G\pi )}^{2/3}}M_{\rm c}^{5/3}}}{3} \left\{ {\begin{array}{*{20}{l}} {\nu _s^{ - 1/3},}&{{\rm{if}}\;{\nu _s} < {\nu _{{\rm{merg}}}};}\\ {\nu _{{\rm{merg}}}^{ - 1}\nu _s^{2/3},}&{{\rm{if}}\;{\nu _{{\rm{merg}}}} \le {\nu _s}{\rm{ < }}{\nu _{{\rm{ring}}}};}\\ {\nu _{{\rm{merg}}}^{ - 1}\nu _{{\rm{ring}}}^{ - 4/3}\nu _s^2{{\left[ {{{\left( {\dfrac{{{\nu _s} - {\nu _{{\rm{ring}}}}}}{{\sigma /2}}} \right)}^2} + 1} \right]}^{ - 2}},}&{{\rm{if}}\;{\nu _{{\rm{ring}}}} \le {\nu _s} < {\nu _{{\rm{cut}}}},} \end{array}} \right. $
(2.3) in which
$ M_{\rm c} = (m_1 m_2)^{3/5}/(m_1+m_2)^{1/5} $ is the chirp mass of the binary. The frequencies$ \nu_{\rm{merg}} $ and$ \nu_{\rm{ring}} $ are boundaries that separate the contributions from different regimes — the inspiral, the merger, and the ringdown stages. The parameter σ characterizes the width of the transition from the merger stage to the ringdown stage, and$ \nu_{\rm{cut}} $ is the cutoff of this template. The frequency dependent behaviors of these parameters are summarized in a vector form$ \vec{\alpha}\equiv\{\nu_{\rm{merg}},\; \nu_{\rm{ring}},\; \sigma,\; \nu_{\rm{cut}}\} $ and can then be further parametrized as$ \alpha_j = \frac{a_j \eta^2+b_j \eta + c_j}{\pi}\times\frac{c^3}{MG}, $
(2.4) where
$ \eta = m_1m_2/(m_1+m_2)^2 $ is the symmetric mass ratio, and M is the total mass of the binary. The values of$ (a_j,b_j,c_j) $ are listed in Table 1.Parameter $ a_j $ $ b_j $ $ c_j $ $ \nu_{\rm{merg}} $ $ 2.9740\times 10^{-1} $ $ 4.4810\times 10^{-2} $ $ 9.5560\times 10^{-2} $ $ \nu_{\rm{ring}} $ $ 5.9411\times 10^{-1} $ $ 8.9794\times 10^{-2} $ $ 1.9111\times 10^{-1} $ σ $ 5.0801\times 10^{-1} $ $ 7.7515\times 10^{-2} $ $ 2.2369\times 10^{-2} $ $ \nu_{\rm{cut}} $ $ 8.4845\times 10^{-1} $ $ 1.2848\times 10^{-1} $ $ 2.7299\times 10^{-1} $ Table 1. Parameters for the GW radiation power spectrum.
-
ABHs follow the star distribution in galaxies. Thus the ABH-PBH merger rate can be calculated by integrating the number density of galaxies with the merger rate in each galaxy halo. To be specific, we obtain
$ R_{\rm{AP}}({z}) = \sum\limits_i\int {\rm d}M_{h}\; \frac{{\rm d}n_h(z,M_h, i)}{{\rm d}M_h}\; R_{\rm{AP}}^{\rm{halo}}(z, M_h, i)\,\,\,, $
(2.5) where i indicates the type of galaxies. It includes disk galaxies and elliptical galaxies in this study.
$ R_{\rm{AP}}^{\rm{halo}}(z,M_h,i) $ is the merger rate of a type-i halo with mass$ M_h $ at redshift z, and$ {\rm d}n_{h}/{\rm d}M_h $ is the halo mass function with$ n_h $ being the physical number density of halos, which can be obtained through numerical simulations.In order to estimate the merger rate
$ R_{\rm{AP}}^{\rm{halo}}(z,M_h,i) $ , the following ingredients are necessary: 1) the spatial distribution function of PBHs$ n_{P}(\vec{r}) $ ; 2) the spatial distribution function of ABHs$ n_{A}(\vec{r}) $ ; 3) ABH-PBH binary formation probability, characterized by the averaged capture cross section$ \langle\sigma_{\rm{mer}}v_{\rm{rel}}\rangle $ . With these, the ABH-PBH merger rate per halo can be written as$\begin{aligned}[b] R_{\rm{AP}}^{\rm{halo}} =& \int_{\rm{halo}} {\rm d}V \int {\rm d}M_A\; n_{P}(M_h,z,\vec{r}) \times\frac{{\rm d}n_{A}}{{\rm d}M_A}(M_A,M_h,z, \vec{r}) \\&\times \langle {\sigma_{\rm{mer}}(M_A,M_P,v_{\rm{rel}})\; v_{\rm{rel}}} \rangle \,,\end{aligned} $
(2.6) where we keep the explicit dependence on the redshift z, the halo mass
$ M_h $ , the ABH/PBH masses, as well as the spatial location of the black holes$ \vec{r} $ inside the halo. Note that, in this formula, the merger rate is identified with the binary formation rate. This is reasonable for the binary formation process that we study here in which the delay between the formation of the binary and the subsequent GW emission is negligible compared to cosmological timescales [49]. Such binary formation channel assumed here is consistent with the classical isolated single and binary evolution which follows the star formation rate. In the rest of this section, we present the details of these three ingredients and then combine them with the halo mass function to estimate the integrated merger rate. -
The mass of the PBH is not well predicted theoretically. In this study, we assume that it takes a single value, and we consider two benchmarks,
$ M_P = 1 $ and$ 30\; M_{\odot} $ . Since the PBHs were produced at the very early time of the universe, their spatial distribution follows that of dark matter. Assuming PBHs constitute a fraction, f, of the total dark matter abundance, the PBH number density can be written as$ n_{P} = \frac{\rho_{P}}{M_P} = f\times\frac{\rho_{\rm{dm}}}{M_P}\,\,\,. $
(2.7) Here, we assume the dark-matter distribution
$ \rho_{\rm{dm}} $ is described by the NFW profile [50],$ \rho_{\rm{dm}}(r) = \frac{\rho_{0}}{r/R_{s}(1+r/R_s)^2}\,\,\,, $
(2.8) where r is the distance from the center of the halo,
$ \rho_0 $ is the normalization factor, and$ R_s $ is related to the virial radius via the concentration parameter$ C(M_h, z) = R_{\rm{vir}}/R_s $ . In this study, we determine the concentration parameter using the fitting formula in Ref. [51] and only consider$ C(M_h, z) $ between$ 0.5 $ and$ 1000 $ in order to avoid a divergent result [8].The virial radius of a halo is defined through the averaged density within the region. More explicitly, for a halo at redshift z, one obtains
$ M_h\simeq\Delta \times \left[\Omega_m (1+z)^3+\Omega_\Lambda \right]\rho_{\rm c}\times\frac{4\pi}{3}R_{\rm{vir}}^3\,\,\,, $
(2.9) where Δ is typically taken as 200 [52].
-
The ABH mass ranges from
$ \sim 5\; M_{\odot} $ to a few tens of solar masses [53, 54]. In order to calculate the distribution of ABHs with respect to different masses, we use the initial mass function (IMF) [55], which describes the number distribution of stars:$ \frac{{{\rm d}{N_M}}}{{{\rm d}M}} \propto \left\{ {\begin{array}{*{20}{l}} {{M^{ - 0.3}},}&{0.01\;{M_ \odot } \le M < 0.08\;{M_ \odot }}\\ {{M^{ - 1.3}},}&{0.08\;{M_ \odot } \le M < 0.5\;{M_ \odot }}\\ {{M^{ - 2.3}},}&{0.5\;{M_ \odot } \le M < 100\;{M_ \odot }} \end{array}} \right..$
(2.10) To determine the fraction of stars that eventually forms black holes, we make a simple assumption that only stars with masses larger than 25
$ M_\odot $ become black holes. It should be noted that this assumption follows from the conclusion in Ref. [56] that a star with metallicity between metal-free and solar metallicity becomes a black hole by supernova mass fallback or direct core collapse if its mass is larger than 25$ M_\odot $ , and those with lower masses can only form white dwarfs or neutron stars. However, recent studies show that the relation between neutron star and black-hole formation is more sophisticated and there is not a single critical mass above which black holes can form [57-63]. Nevertheless, this simplified assumption still allows a concrete estimate when a large number of stars is considered. Moreover, although the formation of a black hole takes a finite amount of time, the lifetime of a star with a mass larger than 25$ M_\odot $ is quite small compared with the cosmological time that we consider in this paper. Therefore, we ignore the ABH formation time and estimate its number density per solar mass of stellar objects as$ \frac{{{\chi _A}({M_A})}}{{{M_ \odot }}} \simeq \frac{{\dfrac{{{\rm d}{N_M}}}{{{\rm d}M}}{\Bigg|_{M = M_A^{{\rm{pro}}}}}}}{{\displaystyle\int_{0.08\;{M_ \odot }}^{100\;{M_ \odot }} {M\dfrac{{{\rm d}{N_M}}}{{{\rm d}M}}\;{\rm d}M} }}. $
(2.11) For simplicity, we follow an approach similar to that in [64] and assume that the remnant ABH only retains
$ \sim 1/3 $ of the initial stellar mass. Therefore,$ M_A^{\rm{pro}}\simeq 3M_A $ stands for the mass of the progenitor associated with an ABH of mass$ M_A $ . In reality, the remnant mass can be affected by stellar winds, which depend on metallicity and thus also on redshift [65-68]. Integrating the equation above, we find that the averaged number of ABHs per solar mass is$ \sim\; 2\times10^{-3} $ . For a galaxy with mass distribution$ \rho_G $ , we thus obtain the spatial distribution of the ABH number density as a function of the ABH mass as$ \frac{{\rm d}n_A}{{\rm d}M_A} = \frac{\chi_{A}(M_A)}{M_{\odot}}\times\rho_{G}\,\,\,. $
(2.12) Notice that this relation assumes that all stars and thus all ABHs are formed in isolation and in the field. Practically, the majority of them are born in binary systems [69, 70], which may further affect our assumption of the two-body capture. We shall reserve the consideration of this effect for future work.
The distribution
$ \rho_{G} $ depends on multiple aspects of a galaxy,$ {\rm i.e.,}\; $ the redshift, the halo mass, and also the type of the galaxy. For elliptical galaxies, we consider the Hernquist Model [71]$ \rho_G(r) = \frac{C_E}{2\pi} \frac{R_{\rm c}}{r(r+R_{\rm c})^3}\,\,\,, $
(2.13) in which r is the radius in spherical coordinates, and the core radius
$ R_{\rm c} $ can be determined by its relation to the half-light (half-mass) radius$ (\sqrt{2}+1)R_{\rm c} = R_{1/2} $ . For disk galaxies, the mass distribution is approximately described by a double exponential form [72]:$ \rho_G(R, h) = C_D \exp(-R/R_D)\exp(-\left| {h} \right|/h_D)\,\,\,, $
(2.14) where R and h are the radius and height in cylindrical coordinates.
$ R_D $ and$ h_D $ are related to the half-light radius of the halo hosting the galaxy as$ 1.68 R_D\simeq R_{1/2} $ , and$ h_D\simeq R_D/10 $ .In both cases, we have
$ R_{1/2} = \lambda R_{\rm{vir}} $ with$ \lambda\simeq 0.015 $ [73]. Moreover, the normalization factor$ C_{D,E} $ in both profiles are determined by$ \int_{\rm{halo}} {\rm d}V \rho_G = M_s\,\,\,, $
(2.15) where
$ M_s $ is the total stellar mass in the galaxy.We determine the total stellar mass using the stellar-halo mass relation provided in Ref. [74]. In particular, the stellar-halo mass relations are parametrized as
$ \log_{10} \left(\frac{M_s}{M_1}\right) = \epsilon - \log_{10}\left( 10^{-\alpha x} +10^{-\beta x} \right) +\gamma \exp\left[-\frac{1}{2}\left(\frac{x}{\delta} \right)^2 \right]\,, $
(2.16) in which
$ x = \log_{10}(M_h/M_1) $ . The parameters scales with redshift as$ \log_{10}\left(\frac{M_1}{M_{\odot}} \right) = M_0+M_a(a-1)-M_{\ln a}\ln a + M_z z \,, $
(2.17) $ \epsilon = \epsilon_0+\epsilon_a(a-1)-\epsilon_{\ln a}\ln a + \epsilon_z z\,, $
(2.18) $ \alpha = \alpha_0+\alpha_a(a-1)-\alpha_{\ln a}\ln a + \alpha_z z\,, $
(2.19) $ \beta = \beta_0+\beta_a(a-1) + \beta_z z\,, $
(2.20) $ \log_{10}\gamma = \gamma_0+\gamma_a(a-1) + \gamma_z z\,, $
(2.21) $ \delta = \delta_0\,, $
(2.22) in which
$ a\equiv 1/(1+z) $ is the scale factor, and the values of the additional parameters are summarized in Table 2. A few examples of the stellar-halo mass relation at different redshifts are shown in Fig. 1.$ M_0 $ $ M_a $ $ M_{\ln a} $ $ M_z $ $ \epsilon_0 $ $ \epsilon_a $ $ \epsilon_{\ln a} $ $ \epsilon_z $ $ 12.06 $ $ 4.609 $ $ 4.525 $ $ -0.756 $ $ -1.459 $ $ 1.515 $ $ 1.249 $ $ -0.214 $ $ \alpha_0 $ $ \alpha_a $ $ \alpha_{\ln a} $ $ \alpha_z $ $ \beta_0 $ $ \beta_a $ − $ \beta_z $ $ 1.972 $ $ -2.523 $ $ -1.868 $ $ 0.188 $ $ 0.488 $ $ -0.965 $ − $ -0.569 $ $ \gamma_0 $ $ \gamma_a $ − $ \gamma_z $ $ \delta_0 $ − − − $ -0.958 $ $ -2.230 $ − $ -0.706 $ $ 0.391 $ − − − Table 2. Parameters for the stellar-halo mass relation.
In our analysis, we consider two limits where all galaxies in the universe are either disk galaxies or elliptical galaxies. The reality should lie between the results from these two limits.
-
We estimate the ABH-PBH binary merger rate through the gravitational capture process. As an ABH and a PBH pass each other, the gravitational wave radiation takes away some amount of the energy of the system. If the energy loss is large enough and brings the total energy of the system below zero, a bound state forms, and the merger will happen soon after. For binaries formed via this mechanism, the characteristic delay time, describing the duration between the binary formation and the final coalescence, depends on the velocity dispersion of the hosting halo. Is typically much shorter (hours for
$ M_h\sim 10^{12}\; M_\odot $ and kyrs for$ M_h\sim 10^{6}\; M_\odot $ [49]) compared to the Hubble time. Therefore, we can safely treat it as instantaneous on cosmological time scales. The gravitational capture cross-section can be estimated as [75]$ \sigma_{\rm{mer}}(m_i,m_j) = 2\pi \left(\frac{85\pi}{6\sqrt{2}}\right)^{2/7}\frac{G^2(m_i+m_j)^{10/7}m_i^{2/7}m_j^{2/7}}{c^{10/7}v_{\rm{rel}}^{18/7}}\,\,\,, $
(2.23) where
$ m_i $ and$ m_j $ are the masses of two black holes, which will be identified as the ABH mass$ M_{A} $ and the PBH mass$ M_{P} $ , respectively, and$ v_{\rm{rel}} $ is the relative velocity between these two black holes.We assume that both the ABH and the PBH velocities follow the same Maxwell-Boltzmann distribution with a cutoff at the virial velocity,
$ v_{\rm{vir}}\equiv\sqrt{2GM_h/R_{\rm{vir}}} $ , of a halo with mass$ M_h $ [8, 49]:$ P(v,v_{\rm{m}}) = F_0\left[\exp\left(-\frac{v^2}{v_{\rm{m}}^2}\right) - \exp\left(-\frac{v_{\rm{vir}}^2}{v_{\rm{m}}^2}\right) \right]\,\,\,, $
(2.24) $ v_{\rm{m}} = \frac{v_{\rm{vir}}}{\sqrt{2}}\sqrt{\frac{C}{C_m}\frac{g(C_m)}{g(C)}}\,\,\,, $
(2.25) $ g(X) = \ln(1+X)-\frac{1}{1+X}\,\,\,, $
(2.26) where
$ v_{\rm{m}} $ is the maximum circular velocity in an NFW halo, which occurs at$ R_m = C_m R_s $ with$ C_m = 2.1626 $ , and$ F_0 $ is the normalization factor so that$\int_0^{v_{\rm{vir}}} {\rm d}v\; 4\pi v^2\times P(v,v_{\rm{m}}) = 1$ . Therefore, averaged cross-section in a halo is defined as$ \langle {\sigma_{\rm{mer}} v} \rangle\equiv\int {\rm d}^3v_1 {\rm d}^3v_2\; \sigma_{\rm{mer}} v_{\rm{rel}} P(v_1,v_m) P(v_2,v_m)\,\,\,, $
(2.27) in which
$ v_{1} $ and$ v_2 $ are the velocities of the ABHs and PBHs, respectively, and$ v_{\rm{rel}} = \left| {\vec{v}_1-\vec{v}_2} \right| $ . -
For the halo mass distribution, we adopt the Sheth-Tormen halo mass function [76], which is an extension to the Press-Schechter formalism [77] that fits well with the results from numerical simulations. Examples of the halo mass function at several different redshifts are provided in Fig. 2. Notice that the examples are shown in the comoving frame, rather than the physical volume.
-
With all the ingredients prepared, the SGWB can be estimated by inserting Eq. (3) and Eq. (5) into Eq. (2). The SGWB energy density spectra are shown in Fig. 3. Here, the two benchmark values of the primordial black hole mass,
$ 1\; M_{\odot} $ and$ 30\; M_{\odot} $ , are presented by assuming$ f = 1 $ . Since the merger rate depends on the PBH fraction f linearly, results for different f can be easily inferred. Due to the large astrophysical uncertainties on the star population at high redshift, we present results with different choices of the cutoff redshift as$ z_{\rm{max}} = 5 $ and$ 10 $ .Figure 3. (color online) Here, we show the isotropic component of the stochastic GW background from ABH-PBH mergers. The left and right panels are results for primordial black hole mass at 1 and
$ 30\; M_{\odot} $ , respectively. For each colored band, the upper boundary is obtained by assuming 100% elliptical galaxies, whereas the lower boundary assumes 100% disk galaxies. Various colored bands correspond to different choices of the redshift cutoff,$ z_{\rm{max}} $ . The sensitivities for several existing and future GW experiments [78] are shown as the gray curves. We also present the expected SGWB produced by the core collapse (CC) [79] and other types of binaries, including PBH-PBH binaries formed at early times through three-body processes [9] (with the chirp mass as$ 1\; M_\odot,\; f = 0.05 $ ), PBH-PBH binaries through gravitational capture in dark matter halos [8] (with chirp mass as$ 30\; M_\odot,\; f = 1 $ ), WD-WD binaries [80], as well as ABH-ABH and NS-NS binaries [36]. Note that we simply take representative results from these references, and all the expected signals are subject to large uncertainties.Notice that choosing different
$ z_{\rm{max}} $ has a noticeable effect. Obviously, a larger$ z_{\rm{max}} $ means more contribution from higher redshifts which enhances the spectrum at lower frequency. Consequently, we observe that the peak shifts to a lower frequency. At a larger redshift, the validity of our astrophysical inputs may not be applicable. Therefore, we do not extend our calculation to a redshift higher than$ z = 10 $ .Another noticeable difference for the two choices of
$ M_P $ is the overall magnitude of$ \Omega_{\rm{GW}} $ — the one with larger$ M_P $ has a larger GW density spectrum. This can be understood as follows. The peak of$ {\rm d}E_{\rm{GW}}/{\rm d}\ln \nu_s $ scales as$ M_{\rm c}^{5/3}\nu_{\rm{merg}}^{-1}\nu_{\rm{ring}}^{2/3}\sim M_A M_P $ . At the same time, the capture rate is proportional to$ n_P\sigma_{\rm{mer}} $ , which scales as$ M_P^{-1} (M_A+ M_P)^{10/7}M_A^{2/7}M_P^{2/7} $ . Clearly, a larger$ M_P $ gives rise to a higher GW spectrum.For each colored band in the plot, the upper boundary is obtained by assuming all elliptical galaxies, while the lower boundary corresponds to the assumption of 100% disk galaxies. The width of the band characterizes the uncertainty from the galaxy type.
The peak of the SGWB energy density from ABH-PBH mergers falls between
$ {\cal{O}}(10^{-15}-10^{-14}) $ . This is far below the sensitivities of the existing or future ground-based experiments such as the aLIGO, Einstein Telescope (ET), and Cosmic Explorer (CE). For future space-based experiments, the Deci-Hertz Interferometer Gravitational-Wave Observatory (DECIGO) and the Big-Bang Observer (BBO) may have sensitivities to probe the ABH-PBH SGWB at a lower frequency band. However, distinguishing such a spectrum from the astrophysical background remains challenging. -
The previous discussion is based on the isotropic distribution of galaxies in our universe. The ABH-PBH mergers within our MW may also contribute to an anisotropic SGWB. These mergers are very close to us and we should be able to identify them individually. However, if we focus on the frequency regime, which is much lower than that of LIGO, it may still be useful to consider the SGWB produced during the inspiral stage. In this section, we estimate the binary formation rate in the MW and determine whether it is proper to be treated as a source of SGWB.
For
$ \rho_{\rm{MW}} $ , we use the best-fitting mass model of the MW as well as its host halo presented in Ref. [81]. In this model, the MW consists of three components — the bulge, the thin disk, and the thick disk. The bulge and the disk density profiles take the following form respectively$ \rho_{b} = \frac{\rho_{b,0}}{(1+r'/r_0)^{\alpha}}\; {\rm e}^{-(r'/r_{\rm{cut}})^2}\,\,\,, $
(3.1) $ \rho_{d} = \frac{\Sigma_{d,0}}{2h_d}\; {\rm e}^{-({\left| {h} \right|}/{h_d})-({R}/{R_d})}\,\,\,, $
(3.2) in which
$ \alpha = 1.8 $ , R and h are the radius and the height in cylindrical coordinates, and$ r' = \sqrt{R^2+(h/q)^2} $ with the axis ratio$ q = 0.5 $ . The dimensionful parameters are listed in Table 3.$ \rho_{b,0} $ $ r_0 $ $ r_{\rm{cut}} $ $ 95.6 M_{\odot} {\rm{pc}}^{-3} $ $ 0.075 {\rm{kpc}} $ $ 2.1 {\rm{kpc}} $ $ \Sigma_{d,0,\rm thin} $ $ h_{d,\rm thin} $ $ R_{d,\rm thin} $ $ 816.6 M_{\odot} {\rm{pc}}^{-2} $ $ 0.3 {\rm{kpc}} $ $ 2.9 {\rm{kpc}} $ $ \Sigma_{d,0,\rm thick} $ $ h_{d,\rm thick} $ $ R_{d,\rm thick} $ $ 209.5 M_{\odot} {\rm{pc}}^{-2} $ $ 0.9 {\rm{kpc}} $ $ 3.31 {\rm{kpc}} $ Table 3. Parameters for MW components.
For the host halo, we still take the NFW profile in Eq. (8) with
$ \rho_0 = 0.00846\; M_{\odot}/{\rm{pc}}^{3} $ and$ R_s = 20.2\; {\rm{kpc}} $ . We assume that the location of the solar system is right on the galactic disk ($ h \simeq 0 $ ) at a distance$ R_{\odot}\simeq 8.29\; {\rm{kpc}} $ away from the galactic center.With these profiles, we can then estimate the binary formation rate in the MW. Straightforward calculation shows that this rate is
$ \sim 2.29 \times 10^{-12}\; {\rm{yr}}^{-1} $ for$ M_P = 1\; M_{\odot} $ and$ \sim 8.32\times 10^{-13}\; {\rm{yr}}^{-1} $ for$ M_P = 30\; M_{\odot} $ . The binary formation rate is so low that it is not likely to have even a single merger event during the age of the universe. Therefore, it is not appropriate to treat the ABH-PBH mergers in the MW as a source of SGWB.
Stochastic gravitational wave background from PBH-ABH mergers
- Received Date: 2021-10-06
- Available Online: 2022-05-15
Abstract: The measurement of gravitational waves produced by binary black-hole mergers at the Advanced LIGO has encouraged extensive studies on the stochastic gravitational wave background. Recent studies have focused on gravitational wave sources made of the same species, such as mergers from binary primordial black holes or those from binary astrophysical black holes. In this paper, we study a new possibility – the stochastic gravitational wave background produced by mergers of one primordial black hole and one astrophysical black hole. Such systems are necessarily present if primordial black holes exist. We study the isotropic gravitational wave background produced through the history of the universe. We find it is very challenging to detect such a signal. We also demonstrate that it is improper to treat the gravitational waves produced by such binaries in the Milky Way as a directional stochastic background due to a very low binary formation rate.