Processing math: 100%

Search for the singlet vector-like top quark in the TtZ channel with Zνˉν at hadron colliders

  • Based on a simplified model including a singlet vector-like top quark T with charge |Q|=2/3, we analyze the prospects of observing T via the single T production in the tZ channel with Z decaying to neutrinos at the hadron-hadron colliders. This simplified model only includes two free parameters, the coupling constant g and the T quark mass mT. To investigate the observability of the single T production, we perform a detailed background analysis and detector simulation for the collision energies 14 TeV, 27 TeV, and 100 TeV. We scan the gmT parameter space and show the exclusion and discovery capabilities on the T quark with the highest integrated luminosity designed at these colliders. Moreover, the limits from the narrow-width approximation and electroweak precision observables are considered.
      PCAS:
    • 12.60.-i(Models beyond the standard model)
  • The discovery of a 125 GeV Higgs boson by the ATLAS and CMS collaborations at the Large Hadron Collider (LHC) completed the last piece of the Standard Model (SM) of particle physics. Meanwhile, the Higgs data have excluded the possibility of additional SM-like chiral fermions. In contrast, the vector-like quarks (VLQs) [1] are consistent with existing Higgs data since they do not receive their masses from Yukawa couplings to a Higgs doublet. The VLQs are color-triplet spin-1/2 fermions, and the left- and right-handed components transform with the same properties under the SM electroweak symmetry group. In some new physics models, such as Little Higgs [24] and Composite Higgs [57] models, the vector-like top quark (VLT) is often introduced to alleviate the gauge hierarchy problem since the VLT is arranged to cancel the one-loop quadratic divergence of the Higgs mass parameter induced by the top quark.

    In experiment, the VLT with masses below 1 TeV are mainly pair-produced via the strong interaction at the LHC. The single production of VLT via the electroweak interaction is also important and may have a larger cross section for the VLT with masses above 1 TeV due to weaker phase-space suppression. Recently, the searches for VLT have been performed in single and pair-produced modes at the LHC with s = 13 TeV. Here, we only focus on the search for the singlet VLT.

    ● In the single-produced process: (1) For the TtH or TtZ channel, the ATLAS collaboration performed a search and presented that the singlet T quark mass below 1.8(1.6) TeV was excluded for the universal coupling strength κ values above 0.5(0.41) corresponding to 139 fb1 [8]. Meanwhile, the CMS collaboration performed a search for the channel TtZ and presented that the singlet T quark mass below 1.4 TeV was excluded for a resonance of fractional width in the range 10% to 30% corresponding to 136 fb1 [9]. (2) For the TWb channel, the search performed by the ATLAS collaboration has set the upper limits on the singlet T quark of mass 800 GeV for the mixing angle |sinθL| = 0.18 corresponding to 36.1 fb1 [10].

    ● In the pair-produced process: (1) For various decay channels (TWb/tZ/tH), the singlet T quark is excluded for masses below 1.31 TeV corresponding to 36.1 fb1 [11]. (2) For the TtZ channel, the limits on the singlet T are set at mT > 1.27 TeV corresponding to 139 fb1 [12].

    In phenomenology, the studies of VLT have been performed extensively in general decay modes (Wb,tZ,tH) [1322] or some exotic channels [2327]. Especially, the VLT can be probed at the LHC by the same-sign dilepton signature [2830]. In Refs. [31, 32], the authors have studied the single production of singlet VLT via TtZ(Zll) at the high luminosity (HL)-LHC with 14 TeV [33], the high energy (HE)-LHC with 27 TeV [34], and the Future Circular Hadron Collider (FCC-hh) with 100 TeV [35]. In this study, we investigate the single production of the singlet VLT decaying into tZ(Zνˉν) at high energy hadron colliders since searches of the VLT on Zll and Zνˉν channels via experiments are also independently carried out. For the high energy hadron colliders, the single production of the VLT decaying into tZ, followed by the Z boson decaying into neutrinos, results in a mono-top signature, which is evidently different from Dark Matter (DM) production, as can be seen in the following section. This channel search has been performed by the LHC experiment [9], and we expect this study to provide a theoretical reference for future analysis and search at the LHC and future hadron colliders.

    The paper is organized as follows. In Sec. II, we briefly review the Lagrangian of the singlet VLT and discuss the limits on the model parameters from the current experiments. In Sec. III, we describe the event generation and detector simulation of the signal and backgrounds at hadron colliders. In Sec. IV, we show the observability of the signal at the HL-LHC, HE-LHC and FCC-hh. Finally, we summarize our results in Sec. V.

    The Lagrangian of the SU(2) singlet VLT with couplings only to the third generation of SM quarks can be expressed as [36]

    LT=gg2{12[ˉTLW+μγμbL]+12cosθW[ˉTLZμγμtL]mT2mW[ˉTRHtL]mt2mW[ˉTLHtR]}+h.c.

    (1)

    where g is the coupling strength of the T quark, only entering the single production, to SM quarks. g is the SU(2)L gauge coupling constant, and θW is the Weinberg angle. In this simplified model, the T quark mass mT and the coupling strength g are the only two free parameters.

    For the coupling coefficient, different symbols are used in different studies [36]; the relationship of these symbols can be deduced as follows:

    g=2κT=2sinθL.

    (2)

    As mentioned above, the limit on g from the LHC direct searches can be conservatively set to a range, g 0.5, which is weaker than the limit from the electroweak precision observables (EWPOs) [37]. Here, we consider the EWPO limit by the oblique parameters S,T,U [38, 39] and take the S,T,U experimental values as [40]

    S=0.01±0.10,T=0.03±0.12,U=0.02±0.11.

    (3)

    There is a strong correlation (0.92) between the S and T parameters. The U parameter is −0.8 (−0.93) anti-correlated with S(T). We adopt the methods in Ref. [41] to calculate this limits and show them in the following figures of numerical results.

    In hadron-hadron collisions, bottom-quarks arise at leading order (LO) in αs through the splitting of a gluon. In the four flavor scheme (4FS), one does not consider b-quarks as partons in the proton, this splitting is described by fixed-order perturbation theory and includes the full dependence on the transverse momentum pT of the b-quark and its mass. In the five flavor scheme (5FS), the splitting arises by solving the DGLAP evolution equations with five massless quark flavours [42]. In recent direct searches for the VLQs at the LHC, the 4FS was implemented in most experiments [810, 4346]; therefore, we perform the theoretical simulation under this scheme.

    We explore the observability of the signal through the following process

    qgq T(tZ)ˉbq t(bjj) Z(νˉν)ˉb3j+2b+T

    and the related Feynman diagram is shown in Fig. 1. We can see that the heavy T quark produced in pp collisions via Wb fusion and the signal events contain three light jets, two b jets, and missing energy T. One important difference between DM production and VLT production is the presence of additional quarks in the single production of T quarks, which will lead to at least one jet being detected at a small angle relative to the beam line. Similar to the DM case, the topology of the VLT signal has a distinctive signature, characterised by the presence of a top-quark and missing transverse momentum arising from the Zνˉν decay. In the detector simulation, we choose Nj3, Nb1, Nl=0 as the trigger condition. According to these signal characters, the main SM backgrounds are Z+jets, tˉt, tˉtV(V=W,Z), VV(V=W,Z), tX(X=j,W,b), and tˉbZj. To consider the background more fully, we make the top quark and W boson decay into all final states in backgrounds except for the irreducible background tˉbZj. For clarity, we summarize the production processes and decay modes of the backgrounds in Table 1. In our calculations, the signal conjugate process qgq ˉTb and the background conjugate processes listed in Table 1 have been included.

    Figure 1

    Figure 1.  Feynman diagram for the production of single T quark decaying to a top quark and a Z boson with Zνˉν at the pp collider.

    Table 1

    Table 1.  Production processes and decay modes of the backgrounds, where the conjugate processes are shown in parentheses. For simplicity, we do not present the decay modes of the conjugate processes.
    BackgroundsDecay mode BackgroundsDecay mode
    Single toppptj(ˉtj)tallDibosonppW+WW+all, Wall
    pptW(ˉtW+)tall, WallppW+Z(WZ)W+all, Zˉνlνl
    pptˉb(ˉtb)tallppZZZˉνlνl,Zall
    Top pairpptˉttall, ˉtall Z+jetsppZjjjZˉνlνl
    pptˉtW+(tˉtW)tall, ˉtall, W+allOtherpptˉbZj(ˉtbZj)tbjj, Zˉνlνl
    pptˉtZtall, ˉtall, Zˉνlνl
    DownLoad: CSV
    Show Table

    For the signal and backgrounds, we calculate the LO cross sections and generate the parton-level events by MadGraph5-aMC@NLO [47], where the CTEQ6_L [48] is used as the parton distribution function (PDF), and the renormalization and factorization scales are set dynamically by default. The numerical values of the input SM parameters are taken as follows [40]:

    mt=172.76GeV,mZ=91.1876GeV,mh=125.10GeV,sin2θW=0.231,α(mZ)=1/128.

    The basic cuts for the signal and backgrounds are choosen as follows:

    ΔR(x,y)>0.4, x,y=, j, b,pT>25 GeV,|η|<2.5,pjT>25 GeV,|ηj|<5.0,pbT>25 GeV,|ηb|<5.0.

    We renormalize the LO cross sections of the backgrounds to the next-leading-order (NLO) or the next-next-leading-order (NNLO) cross sections by multiplying by a K factor. We ignore the differences of the K factor at the HL-LHC, HE-LHC, and FCC-hh and take the values listed in Table 2 for the different processes.

    Table 2

    Table 2.  K-factors of the QCD corrections for the background processes.
    Z+jetsTop-pairSingle topDibosonOther
    ProcessesZjjjtˉttˉtWtˉtZtjtWtˉbWWWZZZtˉbZj
    K-factor1.2 [47]1.8 [49]1.2 [50, 51]1.3 [50, 51]1.4 [50, 52]1.6 [50, 52]1.9 [50, 52]1.6 [53]1.7 [53]1.3 [53]1.1
    DownLoad: CSV
    Show Table

    The T quark is significantly heavy, and therefore, the daughter top quark and Z boson are boosted highly. In this case, the C-A reconstruction algorithm [54] is a better choice compared with the conventional anti-kt algorithm [55]. Thus, we adopt the C-A algorithm to reconstruct the signal and backgrounds.

    We transmit these parton-level events to Pythia 8 [56] for the parton shower. Then, we perform a fast detector simulation by Delphes 3.14 [57], where the CMS cards of the LHC, HE-LHC, and FCC-hh are adopted. We use Fastjet [58] to cluster jets with the C-A algorithm, where the distance parameter is fixed at ΔR=1.5. Finally, we use MadAnalysis 5 [59] to perform the event analysis. During program operation, we apply the package EasyScan_HEP [60] to connect these programs and scan the parameter space. We evaluate the expected signal significance by the Poisson formula [61]:

    SS=2L[(σS+σB)ln(1+σSσB)σS],

    (4)

    where L denotes the integrated luminosity, σS and σB denote the cross sections after all cuts for signal and backgrounds, respectively.

    In this section, we analyze the observability and calculate the statistical significance of the signal at the HL-LHC, HE-LHC, and FCC-hh colliders.

    For the signal, the Z boson is boosted highly so that the large missing energy ET from a pair of neutrinos is expected. Meanwhile, the decay products of the top quark are collimated and captured in a large-radius (large-R) jet. Moreover, the leading b jet that comes from the T decay in the signal will have large transverse momentum due to the boosted effect. Based on the above analysis, we choose the missing energy ET>450 GeV, transverse momentum pb1T>100 GeV, and leading large-R jet-mass 160 GeV<Mj1<190 GeV as the selection criteria. We show these distributions at the 14 TeV LHC in Fig. 2, where mT = 1500 and 1200 GeV (labeled as T1500 and T1200) are chosen as two benchmark points. We summarize the cut flows of the signal and backgrounds in Table 3 and can observe that the largest backgrounds come from tX, tˉt , and Zjjj before cuts. After the selected cuts, all the backgrounds can be suppressed efficiently, and the total cut efficiency of the signal can reach 6.0% (5.4%) for the benchmark point T1500 (T1200). It is worth noting that the backgrounds tX,tˉt,VV,Zjjj are negligibly small after the selected cuts. We have generated events on the order of 106 or more for these backgrounds and found that the remaining events are still negligible. Considering the statistical fluctuation, we take 107 as an optimistic estimate of their cut efficiencies. To investigate the exclusion and discovery capabilities on the VLT at the 14 TeV LHC, we scan the parameter space g[0.05, 0.5] and mT [1000, 2000], where the average value 5.7% of these two signal efficiencies is imposed on the entire parameter space.

    Figure 2

    Figure 2.  (color online) Normalized distributions of ET, pb1T, and Mj1 for the two signal benchmark points (T1200 and T1500) and backgrounds with g=0.2 at the 14 TeV LHC.

    Table 3

    Table 3.  Cut flows of the signal (T1200 and T1500) and backgrounds for g=0.2 at the LHC.
    CutsSignal/fb T1500(T1200)Backgrounds/fb
    tXtˉtttVVVZjjjtbZj
    σ (Before cut)1.20×101(4.10×101)1.03×1052.17×1057.98×1011.25×1041.91×1051.66×101
    Trigger7.04×102(2.49×101)4.46×1048.28×1042.86×1015.0×1021.21×1031.12×101
    T>450 GeV3.40×102(1.06×101)2.05×1012.17×1021.20×1014.15×1011.91×1023.70×102
    pb1T>100 GeV3.12×102(8.67×102)1.37×1012.17×1029.04×1022.49×1011.91×1022.94×102
    160 GeV<Mj1<190 GeV7.24×103(2.2×102)1.03×1022.17×1021.50×1021.25×1031.91×1024.64×103
    Total efficiency6.0%(5.4%)1071070.019%1071070.028%
    DownLoad: CSV
    Show Table

    For the 14 TeV LHC, we show the 2σ exclusion (corresponding to SS=2) and 5σ discovery (corresponding to SS=5) capabilities in the gmT plane in Fig. 3, where the limit from EWPO at the 2σ level is also displayed. If the EWPO limit is not taken into account, the VLT can be excluded in the correlated regions of g [0.16, 0.50] with mT[1000GeV, 1530GeV] corresponding to 300 fb1. For the HL-LHC with 3000 fb1, the excluded correlated regions can be expanded to g [0.09, 0.50] with mT[1000GeV, 1840GeV], and the discovered correlated regions can be expanded to g [0.14, 0.50] and mT[1000GeV, 1600GeV].

    Figure 3

    Figure 3.  (color online) 2σ (left) and 5σ (right) contour plots for the signal at s = 14 TeV in the gmT plane. The solid lines indicate the integrated luminosities, the dashed lines indicate the ΓT/mT, and the red solid lines represent the limit from EWPO at the 2σ level.

    It is worth noting that these cross sections are calculated using the narrow-width approximation (NWA). Since the widths of the VLT may be large and not negligible, we also display the width-to-mass ratios ΓT/mT in Fig. 3. If the search at the HL-LHC is sensitive to the ΓT/mT ranging from narrow up to 30%, the excluded (discovered) parameter space will be reduced to g [0.09, 0.39] ([0.14, 0.44]) with mT [1000 , 1750] GeV ([1000 GeV, 1550 GeV]). If the EWPO limit is considered, the excluded (discovered) parameter space will be further reduced to g [0.09, 0.23] ([0.14, 0.24]) with mT [1000 GeV, 1500 GeV] ([1000 GeV, 1300 GeV]) .

    We take the missing energy ET>500 GeV, transverse momentum pb1T>100 GeV, and jet-mass 160 GeV< Mj1< 190 GeV as the selection criteria and show the normalized distributions of the signal and backgrounds for g = 0.2 at the 27 TeV HE-LHC in Fig. 4, where we choose mT = 1500 and 2000 GeV (labeled as T1500 and T2000) as two benchmark points.

    Figure 4

    Figure 4.  (color online) Normalized distributions of ET, pb1T, andMj1 for the two signal benchmark points (T1500 and T2000) and backgrounds with g=0.2 at the 27 TeV HE-LHC.

    The cut flows of the signal and the backgrounds are summarized in Table 4. We can see that the total cut efficiency of the signal can reach 4.03% (3.5%) for the benchmark point T1500 (T2000), while the backgrounds can be suppressed effectively. Similar to the LHC, we scan the parameter space g [0.05, 0.5] and mT [1000 GeV, 3000 GeV] and impose the average value 3.77% of these two signal efficiencies to the entire parameter space. The exclusion and discovery capabilities in the gmT plane at the HE-LHC are shown in Fig. 5. Compared to the data of the HL-LHC, the excluded (discovered) correlated regions of the VLT at HE-LHC can be expanded to g [0.05, 0.50] ([0.08, 0.50]) with mT [1000 GeV, 2440 GeV] ([1000 GeV, 2100 GeV]) corresponding to 3000 fb1. For the HE-LHC with 15 ab1, the correlated regions g [0.05, 0.50] with mT [1300 GeV, 2750 GeV] ([1000 GeV, 2400 GeV]) can be excluded (discovered). If the limit ΓT/mT< 30% is considered, the excluded (discovered) regions will be reduced to g [0.05, 0.28] ([0.05, 0.31]) with mT [1300 GeV, 2440 GeV] ([1000 GeV, 2160 GeV]) corresponding to 15 ab1. If the EWPO limit is considered, the excluded (discovered) regions will be further reduced to g [0.05, 0.20] ([0.05, 0.21]) with mT [1300 GeV, 2210 GeV] ([1000 GeV, 1900 GeV]).

    Table 4

    Table 4.  Cut flows of the signal (T1500 and T2000) and backgrounds for g=0.2 at the HE-LHC.
    CutsSignal/fb T1500(T2000)Backgrounds/fb
    tXtˉtttVVVZjjjtbZj
    σ (Before cut)1.19(0.24)3098079152103202500069010076.63
    Trigger6.27×101(1.26×101)9.88×1042.65×1058.42×1018.0×1026.07×1034.02×101
    T>500 GeV3.04×101(6.14×102)7.219.15×1023.87×1011.689.111.81×101
    pb1T>100 GeV2.56×101(5.31×102)7.219.15×1022.97×1015.88×1019.111.49×101
    160 GeV<Mj1<190GeV4.79×102(8.44×103)3.10×1029.15×1025.44×1022.5×1036.90×1021.38×102
    Total efficiency4.03%(3.5%)1071070.017%1071070.018%
    DownLoad: CSV
    Show Table

    Figure 5

    Figure 5.  (color online) Same as Fig. 3, but for s = 27 TeV.

    We take the missing energy ET>650 GeV, transverse momentum pb1T>500 GeV, and jet-mass 160 GeV<Mj1<190 GeV as the selection criteria and show the normalized distributions of the signal and backgrounds for g = 0.2 at 100 TeV FCC-hh in Fig. 6, where mT = 1500 and 2500 GeV (labeled as T1500 and T2500) are chosen as two benchmark points. The cut flows of the signal and backgrounds are summarized in Table 5. We can see that the total cut efficiency of the signal can reach 1.4% (1.3%) for the benchmark point T1500 (T2500). Similarly, we scan the parameter space g[0.05, 0.5] and mT[1000GeV, 4000GeV] and impose the average value 1.35% of these two signal efficiencies to the entire parameter space.

    Figure 6

    Figure 6.  (color online) Normalized distributions of ET, pb1T, and Mj1 for the two signal benchmark points (T1500 and T2500) and backgrounds with g=0.2 at the 100 TeV FCC-hh.

    Table 5

    Table 5.  Cut flows of the signal (T1500 and T2500) and backgrounds for g=0.2 at the FCC-hh.
    CutsSignal/fb T1500(T2500)Backgrounds/fb
    tXtˉtttVVVZjjjtbZj
    σ (Before cut)21.36(1.96)187997395100253720891385701000779.3
    Trigger1.24×101(1.12)6.94×1053.12×1061.15×1039.45×1035.02×1054.40×102
    T>650 GeV3.69(4.22×101)1.04×1021.87×1023.331.32×1011.76×1021.76
    pb1T>150 GeV3.25(3.79×101)9.76×1011.87×1022.735.858.78×1011.42
    160 GeV<Mj1<190 GeV2.99×101(2.55×102)1.88×1019.51×1014.09×1012.94×1015.70×1011.01×101
    Total efficiency1.4%(1.3%)1071070.011%0.00033%1070.013%
    DownLoad: CSV
    Show Table

    The exclusion and discovery capabilities in the gmT plane at s = 100 TeV are shown in Fig. 7. Corresponding to 3000fb1 (15ab1), the T quark can be excluded in the correlated regions of g [0.05, 0.50] ([0.08, 0.50]) with mT [1050 GeV, 2810 GeV] ([1400 GeV, 3240 GeV]) . For the FCC-hh with 30 ab1, the excluded (discovered) regions can be expanded to g [0.05, 0.50] with mT [2500 GeV, 3420 GeV] ([2050 GeV, 2950 GeV]) . If the limit ΓT/mT < 30% is considered, the excluded (discovered) regions will be reduced to g [0.05, 0.24] ([0.05, 0.27]) with mT [2500 GeV, 2880 GeV] ([2050 GeV, 2510 GeV]) corresponding to 30 ab1. If the EWPO limit is considered, the excluded (discovered) regions will be further reduced to g [0.05, 0.19] ([0.05, 0.20]) with mT [2500 GeV, 2660 GeV] ([2050 GeV, 2240 GeV]) .

    Figure 7

    Figure 7.  (color online) Same as Fig. 3, but for s = 100 TeV.

    In this study, we investigate the single production of the VLT decaying into tZ with Zνˉν at the HL-LHC, HE-LHC, and FCC-hh. We establish a simplified model including a SU(2) singlet T with charge 2/3, and the T quark couples exclusively to the third-generation SM quarks. At this time, only the mass mT and coupling constant g are the free parameters. Under the limits of LHC direct searches, we perform a detailed detector simulation for the signal and backgrounds. We summarize the exclusion and discovery capabilities on the T quark at different hadron colliders with the highest designed integrated luminosity in Table 6, where the results from the limits ΓT/mT < 30% and EWPO are also listed.

    Table 6

    Table 6.  Exclusion and discovery capabilities on T at different hadron colliders.
    CollidersExclusion Capability (2σ)Discovery Capability (5σ)
    HL-LHCHE-LHCFCC-hhHL-LHCHE-LHCFCC-hh
    LuminosityL=3 ab1L=15 ab1L=30 ab1L=3 ab1L=15 ab1L=30 ab1
    g[0.09,0.5][0.05,0.5][0.05,0.5][0.14,0.5][0.05,0.5][0.05,0.5]
    mT/GeV[1000, 1840][1300, 2750][2500, 3420][1000, 1600][1000, 2400][2050, 2950]
    g(ΓTmT < 30%)[0.09,0.39][0.05,0.28][0.05,0.24][0.14,0.44][0.05,0.31][0.05,0.27]
    mT/GeV[1000, 1750][1300, 2440][2500, 2880][1000, 1550][1000, 2160][2050, 2510]
    g(EWPO)[0.09,0.23][0.05,0.20][0.05,0.19][0.14,0.24][0.05,0.21][0.05,0.20]
    mT/GeV[1000, 1500][1300, 2210][2500, 2660][1000, 1300][1000, 1900][2050, 2240]
    DownLoad: CSV
    Show Table

    We can see that the exclusion and discovery capabilities on the T quark are enhanced evidently with the increase in the collision energy. If we consider the NWA and EWPO limits, the exclusion and discovery regions will be reduced to some extent. We expect these results to provide a meaningful reference for the search for such a singlet VLT quark at future hadron colliders.

    [1] G. C. Branco and M. N. Rebelo, PoS DISCRETE2020-2021, 004 (2022) doi: 10.22323/1.405.0004
    [2] N. Arkani-Hamed, A. G. Cohen, E. Katz et al., JHEP 07, 034 (2002) doi: 10.1088/1126-6708/2002/07/034
    [3] M. Schmaltz and D. Tucker-Smith, Ann. Rev. Nucl. Part. Sci. 55, 229 (2005) doi: 10.1146/annurev.nucl.55.090704.151502
    [4] H. C. Cheng, I. Low, and L. T. Wang, Phys. Rev. D 74, 055001 (2006) doi: 10.1103/PhysRevD.74.055001
    [5] D. B. Kaplan, H. Georgi, and S. Dimopoulos, Phys. Lett. B 136, 187 (1984) doi: 10.1016/0370-2693(84)91178-X
    [6] J. M. Li, D. Liu, and J. Shu, JHEP 11, 047 (2013) doi: 10.1007/JHEP11(2013)047
    [7] M. Low, A. Tesi, and L. T. Wang, Phys. Rev. D 91, 095012 (2015) doi: 10.1103/PhysRevD.91.095012
    [8] ATLAS Collaboration, ATLAS-CONF-2021-040
    [9] CMS Collaboration, CMS-B2G-19-004
    [10] M. Aaboud et al. (ATLAS Collaboration), JHEP 05, 164 (2019) doi: 10.1007/JHEP05(2019)164
    [11] ATLAS Collaboration, Phys. Rev. Lett. 121, 211801 (2018) doi: 10.1103/PhysRevLett.121.211801
    [12] ATLAS Collaboration, ATLAS-CONF-2021-024
    [13] O. Matsedonskyi, G. Panico, and A. Wulzer, JHEP 12, 097 (2014) doi: 10.1007/JHEP12(2014)097
    [14] T. Andeen, C. Bernard, K. Black et al., arXiv: 1309.1888[hep-ph]
    [15] N. Vignaroli, JHEP 07, 158 (2012) doi: 10.1007/JHEP07(2012)158
    [16] N. Vignaroli, Phys. Rev. D 86, 075017 (2012) doi: 10.1103/PhysRevD.86.075017
    [17] A. De Simone, O. Matsedonskyi, R. Rattazzi et al., JHEP 04, 004 (2013) doi: 10.1007/JHEP04(2013)004
    [18] C. C. Han, A. Kobakhidze, N. Liu et al., Nuc. Phys. B 890, 388-399 (2015) doi: 10.1016/j.nuclphysb.2014.11.021
    [19] B. F. Yang, B. F. Hou, H. Y. Zhang et al., Phys. Rev. D 99, 095002 (2019) doi: 10.1103/PhysRevD.99.095002
    [20] B. F. Yang, M. M. Wang, H. H. Bi et al., Phys. Rev. D 103, 036006 (2021) doi: 10.1103/PhysRevD.103.036006
    [21] A. Buckley, J. M. Butterworth, L. Corpe et al., SciPost Phys. 9(5), 069 (2020) doi: 10.21468/SciPostPhys.9.5.069
    [22] A. Belyaev, R. S. Chivukula, B. Fuks et al., Phys. Rev. D 104(9), 095024 (2021) doi: 10.1103/PhysRevD.104.095024
    [23] A. Senol, A. T. Tasci, and F. Ustabas, Nucl. Phys. B 851, 289-297 (2011) doi: 10.1016/j.nuclphysb.2011.05.022
    [24] J. Alwall, J. L. Feng, J. Kumar et al., Phys. Rev. D 81, 114027 (2010) doi: 10.1103/PhysRevD.81.114027
    [25] N. Liu, L. Wu, B. F. Yang et al., Phys. Lett. B 753, 664-669 (2016) doi: 10.1016/j.physletb.2015.12.066
    [26] D. H. Wang, L. Wu, and M. C. Zhang, Phys. Rev. D 103(11), 115017 (2021) doi: 10.1103/PhysRevD.103.115017
    [27] H. Zhou and N. Liu, Phys. Rev. D 101(11), 115028 (2020) doi: 10.1103/PhysRevD.101.115028
    [28] X. M. Cui, Y. Q. Li, and Y. B. Liu, Phys. Rev. D 106(11), 115025 (2022) doi: 10.1103/PhysRevD.106.115025
    [29] H. Zhou and N. Liu, Commun. Theor. Phys. 72(10), 105201 (2020) doi: 10.1088/1572-9494/aba245
    [30] J. J. Cao, L. Wang, L. Wu et al., Phys. Rev. D 84, 074001 (2011) doi: 10.1103/PhysRevD.84.074001
    [31] Y. B. Liu and Y. Q. Li, Eur. Phys. J. C 77(10), 654 (2017) doi: 10.1140/epjc/s10052-017-5228-4
    [32] B. F. Yang, X. L. Sima, S. Y. Wang et al., Phys. Rev. D 105, 096010 (2022) doi: 10.1103/PhysRevD.105.096010
    [33] High-luminosity LHC technical design report, https://doi.org/10.23731/CYRM-2017-004.
    [34] Workshop on the Physics of HL-LHC and Perspectives at HE-LHC, https://indico.cern.ch/event/647676/overview.
    [35] M. Bicer et al. (TLEP Design Study Working Group), JHEP 01, 164 (2014) doi: 10.1007/JHEP01(2014)164
    [36] M. Buchkremer, G. Cacciapaglia, A. Deandrea et al., Nucl. Phys. B 876, 376-417 (2013) doi: 10.1016/j.nuclphysb.2013.08.010
    [37] J. A. Aguilar-Saavedra, R. Benbrik, S. Heinemeyer et al., Phys. Rev. D 88(9), 094010 (2013) doi: 10.1103/PhysRevD.88.094010
    [38] M. E. Peskin and T. Takeuchi, Phys. Rev. Lett. 65, 964-967 (1990) doi: 10.1103/PhysRevLett.65.964
    [39] M. E. Peskin and T. Takeuchi, Phys. Rev. D 46, 381-409 (1992) doi: 10.1103/PhysRevD.46.381
    [40] P. A. Zyla et al. (Particle Data Group), Prog. Theor. Exp. Phys. 2020, 083C01 (2020) doi: 10.1093/ptep/ptaa104
    [41] J. J. Cao, L. Meng, L. L. Shang et al., Phys. Rev. D 106, 055042 (2022) doi: 10.1103/PhysRevD.106.055042
    [42] R. M. Barnett, H. E. Haber, and D. E. Soper, Nucl. Phys. B 306, 697 (1988) doi: 10.1016/0550-3213(88)90440-3
    [43] CMS Collaboration, JHEP 01, 036 (2020) doi: 10.1007/JHEP01(2020)036
    [44] A. M. Sirunyan, et al. (CMS Collaboration), JHEP 05, 029 (2017) doi: https://link.springer.com/article/10.1007/JHEP05(2017)029
    [45] A. M. Sirunyan, et al. (CMS Collaboration), Phys. Lett. B 781, 574 (2018) doi: 10.1016/j.physletb.2018.04.036
    [46] ATLAS Collaboration, JHEP 05, 041 (2019) doi: 10.4236/jhepgc.2019.51003
    [47] J. Alwall, R. Frederix, S. Frixione et al., JHEP 07, 079 (2014) doi: 10.1007/JHEP07(2014)079
    [48] J. Pumplin, A. Belyaev, J. Huston et al., JHEP 02, 032 (2006) doi: 10.1088/1126-6708/2006/02/032
    [49] M. Czakon and A. Mitov, JHEP 12, 054 (2012) doi: 10.1007/JHEP12(2012)054
    [50] N. Kidonakis, arXiv: 1808.02934[hep-ph]
    [51] J. M. Campbell and R. K. Ellis, JHEP 07, 052 (2012) doi: 10.1007/JHEP07(2012)052
    [52] E. Boos and L. Dudko, Int. J. Mod. Phys. A 27, 1230026 (2012) doi: 10.1142/S0217751X12300268
    [53] J. M. Campbell and R. K. Ellis, Phys. Rev. D 60, 113006 (1999) doi: 10.1103/PhysRevD.60.113006
    [54] CMS Collaboration, CMS-PAS-JME-09-001
    [55] M. Cacciari and G. P. Salam, Phys. Lett. B 641, 57-61 (2006) doi: 10.1016/j.physletb.2006.08.037
    [56] T. Sjostrand, S. Mrenna, and P. Z. Skands, JHEP 05, 26 (2006) doi: 10.1088/1126-6708/2006/05/026
    [57] J. D. Favereau, C. Delaere, P. Demin et al. (The DELPHES 3 Collaboration), JHEP 2, 57 (2014) doi: 10.1007/JHEP02(2014)057
    [58] M. Cacciari, G. P. Salam, and G. Soyez, Eur. Phys. J. C 72, 1896 (2012) doi: 10.1140/epjc/s10052-012-1896-2
    [59] E. Conte, B. Fuks, and G. Serret, Comput. Phys. Commun. 184, 222 (2013) doi: 10.1016/j.cpc.2012.09.009
    [60] L. L. Shang and Y. Zhang, EasyScan_HEP, https://easyscanhep.hepforge.org
    [61] G. Cowan, K. Cranmer, E. Gross et al., Eur. Phys. J. C 71, 1554 (2011) doi: 10.1140/epjc/s10052-011-1554-0
  • [1] G. C. Branco and M. N. Rebelo, PoS DISCRETE2020-2021, 004 (2022) doi: 10.22323/1.405.0004
    [2] N. Arkani-Hamed, A. G. Cohen, E. Katz et al., JHEP 07, 034 (2002) doi: 10.1088/1126-6708/2002/07/034
    [3] M. Schmaltz and D. Tucker-Smith, Ann. Rev. Nucl. Part. Sci. 55, 229 (2005) doi: 10.1146/annurev.nucl.55.090704.151502
    [4] H. C. Cheng, I. Low, and L. T. Wang, Phys. Rev. D 74, 055001 (2006) doi: 10.1103/PhysRevD.74.055001
    [5] D. B. Kaplan, H. Georgi, and S. Dimopoulos, Phys. Lett. B 136, 187 (1984) doi: 10.1016/0370-2693(84)91178-X
    [6] J. M. Li, D. Liu, and J. Shu, JHEP 11, 047 (2013) doi: 10.1007/JHEP11(2013)047
    [7] M. Low, A. Tesi, and L. T. Wang, Phys. Rev. D 91, 095012 (2015) doi: 10.1103/PhysRevD.91.095012
    [8] ATLAS Collaboration, ATLAS-CONF-2021-040
    [9] CMS Collaboration, CMS-B2G-19-004
    [10] M. Aaboud et al. (ATLAS Collaboration), JHEP 05, 164 (2019) doi: 10.1007/JHEP05(2019)164
    [11] ATLAS Collaboration, Phys. Rev. Lett. 121, 211801 (2018) doi: 10.1103/PhysRevLett.121.211801
    [12] ATLAS Collaboration, ATLAS-CONF-2021-024
    [13] O. Matsedonskyi, G. Panico, and A. Wulzer, JHEP 12, 097 (2014) doi: 10.1007/JHEP12(2014)097
    [14] T. Andeen, C. Bernard, K. Black et al., arXiv: 1309.1888[hep-ph]
    [15] N. Vignaroli, JHEP 07, 158 (2012) doi: 10.1007/JHEP07(2012)158
    [16] N. Vignaroli, Phys. Rev. D 86, 075017 (2012) doi: 10.1103/PhysRevD.86.075017
    [17] A. De Simone, O. Matsedonskyi, R. Rattazzi et al., JHEP 04, 004 (2013) doi: 10.1007/JHEP04(2013)004
    [18] C. C. Han, A. Kobakhidze, N. Liu et al., Nuc. Phys. B 890, 388-399 (2015) doi: 10.1016/j.nuclphysb.2014.11.021
    [19] B. F. Yang, B. F. Hou, H. Y. Zhang et al., Phys. Rev. D 99, 095002 (2019) doi: 10.1103/PhysRevD.99.095002
    [20] B. F. Yang, M. M. Wang, H. H. Bi et al., Phys. Rev. D 103, 036006 (2021) doi: 10.1103/PhysRevD.103.036006
    [21] A. Buckley, J. M. Butterworth, L. Corpe et al., SciPost Phys. 9(5), 069 (2020) doi: 10.21468/SciPostPhys.9.5.069
    [22] A. Belyaev, R. S. Chivukula, B. Fuks et al., Phys. Rev. D 104(9), 095024 (2021) doi: 10.1103/PhysRevD.104.095024
    [23] A. Senol, A. T. Tasci, and F. Ustabas, Nucl. Phys. B 851, 289-297 (2011) doi: 10.1016/j.nuclphysb.2011.05.022
    [24] J. Alwall, J. L. Feng, J. Kumar et al., Phys. Rev. D 81, 114027 (2010) doi: 10.1103/PhysRevD.81.114027
    [25] N. Liu, L. Wu, B. F. Yang et al., Phys. Lett. B 753, 664-669 (2016) doi: 10.1016/j.physletb.2015.12.066
    [26] D. H. Wang, L. Wu, and M. C. Zhang, Phys. Rev. D 103(11), 115017 (2021) doi: 10.1103/PhysRevD.103.115017
    [27] H. Zhou and N. Liu, Phys. Rev. D 101(11), 115028 (2020) doi: 10.1103/PhysRevD.101.115028
    [28] X. M. Cui, Y. Q. Li, and Y. B. Liu, Phys. Rev. D 106(11), 115025 (2022) doi: 10.1103/PhysRevD.106.115025
    [29] H. Zhou and N. Liu, Commun. Theor. Phys. 72(10), 105201 (2020) doi: 10.1088/1572-9494/aba245
    [30] J. J. Cao, L. Wang, L. Wu et al., Phys. Rev. D 84, 074001 (2011) doi: 10.1103/PhysRevD.84.074001
    [31] Y. B. Liu and Y. Q. Li, Eur. Phys. J. C 77(10), 654 (2017) doi: 10.1140/epjc/s10052-017-5228-4
    [32] B. F. Yang, X. L. Sima, S. Y. Wang et al., Phys. Rev. D 105, 096010 (2022) doi: 10.1103/PhysRevD.105.096010
    [33] High-luminosity LHC technical design report, https://doi.org/10.23731/CYRM-2017-004.
    [34] Workshop on the Physics of HL-LHC and Perspectives at HE-LHC, https://indico.cern.ch/event/647676/overview.
    [35] M. Bicer et al. (TLEP Design Study Working Group), JHEP 01, 164 (2014) doi: 10.1007/JHEP01(2014)164
    [36] M. Buchkremer, G. Cacciapaglia, A. Deandrea et al., Nucl. Phys. B 876, 376-417 (2013) doi: 10.1016/j.nuclphysb.2013.08.010
    [37] J. A. Aguilar-Saavedra, R. Benbrik, S. Heinemeyer et al., Phys. Rev. D 88(9), 094010 (2013) doi: 10.1103/PhysRevD.88.094010
    [38] M. E. Peskin and T. Takeuchi, Phys. Rev. Lett. 65, 964-967 (1990) doi: 10.1103/PhysRevLett.65.964
    [39] M. E. Peskin and T. Takeuchi, Phys. Rev. D 46, 381-409 (1992) doi: 10.1103/PhysRevD.46.381
    [40] P. A. Zyla et al. (Particle Data Group), Prog. Theor. Exp. Phys. 2020, 083C01 (2020) doi: 10.1093/ptep/ptaa104
    [41] J. J. Cao, L. Meng, L. L. Shang et al., Phys. Rev. D 106, 055042 (2022) doi: 10.1103/PhysRevD.106.055042
    [42] R. M. Barnett, H. E. Haber, and D. E. Soper, Nucl. Phys. B 306, 697 (1988) doi: 10.1016/0550-3213(88)90440-3
    [43] CMS Collaboration, JHEP 01, 036 (2020) doi: 10.1007/JHEP01(2020)036
    [44] A. M. Sirunyan, et al. (CMS Collaboration), JHEP 05, 029 (2017) doi: https://link.springer.com/article/10.1007/JHEP05(2017)029
    [45] A. M. Sirunyan, et al. (CMS Collaboration), Phys. Lett. B 781, 574 (2018) doi: 10.1016/j.physletb.2018.04.036
    [46] ATLAS Collaboration, JHEP 05, 041 (2019) doi: 10.4236/jhepgc.2019.51003
    [47] J. Alwall, R. Frederix, S. Frixione et al., JHEP 07, 079 (2014) doi: 10.1007/JHEP07(2014)079
    [48] J. Pumplin, A. Belyaev, J. Huston et al., JHEP 02, 032 (2006) doi: 10.1088/1126-6708/2006/02/032
    [49] M. Czakon and A. Mitov, JHEP 12, 054 (2012) doi: 10.1007/JHEP12(2012)054
    [50] N. Kidonakis, arXiv: 1808.02934[hep-ph]
    [51] J. M. Campbell and R. K. Ellis, JHEP 07, 052 (2012) doi: 10.1007/JHEP07(2012)052
    [52] E. Boos and L. Dudko, Int. J. Mod. Phys. A 27, 1230026 (2012) doi: 10.1142/S0217751X12300268
    [53] J. M. Campbell and R. K. Ellis, Phys. Rev. D 60, 113006 (1999) doi: 10.1103/PhysRevD.60.113006
    [54] CMS Collaboration, CMS-PAS-JME-09-001
    [55] M. Cacciari and G. P. Salam, Phys. Lett. B 641, 57-61 (2006) doi: 10.1016/j.physletb.2006.08.037
    [56] T. Sjostrand, S. Mrenna, and P. Z. Skands, JHEP 05, 26 (2006) doi: 10.1088/1126-6708/2006/05/026
    [57] J. D. Favereau, C. Delaere, P. Demin et al. (The DELPHES 3 Collaboration), JHEP 2, 57 (2014) doi: 10.1007/JHEP02(2014)057
    [58] M. Cacciari, G. P. Salam, and G. Soyez, Eur. Phys. J. C 72, 1896 (2012) doi: 10.1140/epjc/s10052-012-1896-2
    [59] E. Conte, B. Fuks, and G. Serret, Comput. Phys. Commun. 184, 222 (2013) doi: 10.1016/j.cpc.2012.09.009
    [60] L. L. Shang and Y. Zhang, EasyScan_HEP, https://easyscanhep.hepforge.org
    [61] G. Cowan, K. Cranmer, E. Gross et al., Eur. Phys. J. C 71, 1554 (2011) doi: 10.1140/epjc/s10052-011-1554-0
  • 加载中

Figures(7) / Tables(6)

Get Citation
Lin Han, Shiyu Wang, Liangliang Shang and Bingfang Yang. Search for the singlet vector-like top quark in TtZ channel with Zνˉν at hadron colliders[J]. Chinese Physics C. doi: 10.1088/1674-1137/acb994
Lin Han, Shiyu Wang, Liangliang Shang and Bingfang Yang. Search for the singlet vector-like top quark in TtZ channel with Zνˉν at hadron colliders[J]. Chinese Physics C.  doi: 10.1088/1674-1137/acb994 shu
Milestone
Received: 2022-12-06
Article Metric

Article Views(1287)
PDF Downloads(23)
Cited by(0)
Policy on re-use
To reuse of Open Access content published by CPC, for content published under the terms of the Creative Commons Attribution 3.0 license (“CC CY”), the users don’t need to request permission to copy, distribute and display the final published version of the article and to create derivative works, subject to appropriate attribution.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

Search for the singlet vector-like top quark in the TtZ channel with Zνˉν at hadron colliders

  • 1. School of Medical Engineering, Xinxiang Medical University, Xinxiang 453003, China
  • 2. School of Physics, Henan Normal University, Xinxiang 453007, China

Abstract: Based on a simplified model including a singlet vector-like top quark T with charge |Q|=2/3, we analyze the prospects of observing T via the single T production in the tZ channel with Z decaying to neutrinos at the hadron-hadron colliders. This simplified model only includes two free parameters, the coupling constant g and the T quark mass mT. To investigate the observability of the single T production, we perform a detailed background analysis and detector simulation for the collision energies 14 TeV, 27 TeV, and 100 TeV. We scan the gmT parameter space and show the exclusion and discovery capabilities on the T quark with the highest integrated luminosity designed at these colliders. Moreover, the limits from the narrow-width approximation and electroweak precision observables are considered.

    HTML

    I.   INTRODUCTION
    • The discovery of a 125 GeV Higgs boson by the ATLAS and CMS collaborations at the Large Hadron Collider (LHC) completed the last piece of the Standard Model (SM) of particle physics. Meanwhile, the Higgs data have excluded the possibility of additional SM-like chiral fermions. In contrast, the vector-like quarks (VLQs) [1] are consistent with existing Higgs data since they do not receive their masses from Yukawa couplings to a Higgs doublet. The VLQs are color-triplet spin-1/2 fermions, and the left- and right-handed components transform with the same properties under the SM electroweak symmetry group. In some new physics models, such as Little Higgs [24] and Composite Higgs [57] models, the vector-like top quark (VLT) is often introduced to alleviate the gauge hierarchy problem since the VLT is arranged to cancel the one-loop quadratic divergence of the Higgs mass parameter induced by the top quark.

      In experiment, the VLT with masses below 1 TeV are mainly pair-produced via the strong interaction at the LHC. The single production of VLT via the electroweak interaction is also important and may have a larger cross section for the VLT with masses above 1 TeV due to weaker phase-space suppression. Recently, the searches for VLT have been performed in single and pair-produced modes at the LHC with s = 13 TeV. Here, we only focus on the search for the singlet VLT.

      ● In the single-produced process: (1) For the TtH or TtZ channel, the ATLAS collaboration performed a search and presented that the singlet T quark mass below 1.8(1.6) TeV was excluded for the universal coupling strength κ values above 0.5(0.41) corresponding to 139 fb1 [8]. Meanwhile, the CMS collaboration performed a search for the channel TtZ and presented that the singlet T quark mass below 1.4 TeV was excluded for a resonance of fractional width in the range 10% to 30% corresponding to 136 fb1 [9]. (2) For the TWb channel, the search performed by the ATLAS collaboration has set the upper limits on the singlet T quark of mass 800 GeV for the mixing angle |sinθL| = 0.18 corresponding to 36.1 fb1 [10].

      ● In the pair-produced process: (1) For various decay channels (TWb/tZ/tH), the singlet T quark is excluded for masses below 1.31 TeV corresponding to 36.1 fb1 [11]. (2) For the TtZ channel, the limits on the singlet T are set at mT > 1.27 TeV corresponding to 139 fb1 [12].

      In phenomenology, the studies of VLT have been performed extensively in general decay modes (Wb,tZ,tH) [1322] or some exotic channels [2327]. Especially, the VLT can be probed at the LHC by the same-sign dilepton signature [2830]. In Refs. [31, 32], the authors have studied the single production of singlet VLT via TtZ(Zll) at the high luminosity (HL)-LHC with 14 TeV [33], the high energy (HE)-LHC with 27 TeV [34], and the Future Circular Hadron Collider (FCC-hh) with 100 TeV [35]. In this study, we investigate the single production of the singlet VLT decaying into tZ(Zνˉν) at high energy hadron colliders since searches of the VLT on Zll and Zνˉν channels via experiments are also independently carried out. For the high energy hadron colliders, the single production of the VLT decaying into tZ, followed by the Z boson decaying into neutrinos, results in a mono-top signature, which is evidently different from Dark Matter (DM) production, as can be seen in the following section. This channel search has been performed by the LHC experiment [9], and we expect this study to provide a theoretical reference for future analysis and search at the LHC and future hadron colliders.

      The paper is organized as follows. In Sec. II, we briefly review the Lagrangian of the singlet VLT and discuss the limits on the model parameters from the current experiments. In Sec. III, we describe the event generation and detector simulation of the signal and backgrounds at hadron colliders. In Sec. IV, we show the observability of the signal at the HL-LHC, HE-LHC and FCC-hh. Finally, we summarize our results in Sec. V.

    II.   SINGLET VLT MODEL
    • The Lagrangian of the SU(2) singlet VLT with couplings only to the third generation of SM quarks can be expressed as [36]

      LT=gg2{12[ˉTLW+μγμbL]+12cosθW[ˉTLZμγμtL]mT2mW[ˉTRHtL]mt2mW[ˉTLHtR]}+h.c.

      (1)

      where g is the coupling strength of the T quark, only entering the single production, to SM quarks. g is the SU(2)L gauge coupling constant, and θW is the Weinberg angle. In this simplified model, the T quark mass mT and the coupling strength g are the only two free parameters.

      For the coupling coefficient, different symbols are used in different studies [36]; the relationship of these symbols can be deduced as follows:

      g=2κT=2sinθL.

      (2)

      As mentioned above, the limit on g from the LHC direct searches can be conservatively set to a range, g 0.5, which is weaker than the limit from the electroweak precision observables (EWPOs) [37]. Here, we consider the EWPO limit by the oblique parameters S,T,U [38, 39] and take the S,T,U experimental values as [40]

      S=0.01±0.10,T=0.03±0.12,U=0.02±0.11.

      (3)

      There is a strong correlation (0.92) between the S and T parameters. The U parameter is −0.8 (−0.93) anti-correlated with S(T). We adopt the methods in Ref. [41] to calculate this limits and show them in the following figures of numerical results.

    III.   EVENT GENERATION
    • In hadron-hadron collisions, bottom-quarks arise at leading order (LO) in αs through the splitting of a gluon. In the four flavor scheme (4FS), one does not consider b-quarks as partons in the proton, this splitting is described by fixed-order perturbation theory and includes the full dependence on the transverse momentum pT of the b-quark and its mass. In the five flavor scheme (5FS), the splitting arises by solving the DGLAP evolution equations with five massless quark flavours [42]. In recent direct searches for the VLQs at the LHC, the 4FS was implemented in most experiments [810, 4346]; therefore, we perform the theoretical simulation under this scheme.

      We explore the observability of the signal through the following process

      qgq T(tZ)ˉbq t(bjj) Z(νˉν)ˉb3j+2b+T

      and the related Feynman diagram is shown in Fig. 1. We can see that the heavy T quark produced in pp collisions via Wb fusion and the signal events contain three light jets, two b jets, and missing energy T. One important difference between DM production and VLT production is the presence of additional quarks in the single production of T quarks, which will lead to at least one jet being detected at a small angle relative to the beam line. Similar to the DM case, the topology of the VLT signal has a distinctive signature, characterised by the presence of a top-quark and missing transverse momentum arising from the Zνˉν decay. In the detector simulation, we choose Nj3, Nb1, Nl=0 as the trigger condition. According to these signal characters, the main SM backgrounds are Z+jets, tˉt, tˉtV(V=W,Z), VV(V=W,Z), tX(X=j,W,b), and tˉbZj. To consider the background more fully, we make the top quark and W boson decay into all final states in backgrounds except for the irreducible background tˉbZj. For clarity, we summarize the production processes and decay modes of the backgrounds in Table 1. In our calculations, the signal conjugate process qgq ˉTb and the background conjugate processes listed in Table 1 have been included.

      Figure 1.  Feynman diagram for the production of single T quark decaying to a top quark and a Z boson with Zνˉν at the pp collider.

      BackgroundsDecay mode BackgroundsDecay mode
      Single toppptj(ˉtj)tallDibosonppW+WW+all, Wall
      pptW(ˉtW+)tall, WallppW+Z(WZ)W+all, Zˉνlνl
      pptˉb(ˉtb)tallppZZZˉνlνl,Zall
      Top pairpptˉttall, ˉtall Z+jetsppZjjjZˉνlνl
      pptˉtW+(tˉtW)tall, ˉtall, W+allOtherpptˉbZj(ˉtbZj)tbjj, Zˉνlνl
      pptˉtZtall, ˉtall, Zˉνlνl

      Table 1.  Production processes and decay modes of the backgrounds, where the conjugate processes are shown in parentheses. For simplicity, we do not present the decay modes of the conjugate processes.

      For the signal and backgrounds, we calculate the LO cross sections and generate the parton-level events by MadGraph5-aMC@NLO [47], where the CTEQ6_L [48] is used as the parton distribution function (PDF), and the renormalization and factorization scales are set dynamically by default. The numerical values of the input SM parameters are taken as follows [40]:

      mt=172.76GeV,mZ=91.1876GeV,mh=125.10GeV,sin2θW=0.231,α(mZ)=1/128.

      The basic cuts for the signal and backgrounds are choosen as follows:

      ΔR(x,y)>0.4, x,y=, j, b,pT>25 GeV,|η|<2.5,pjT>25 GeV,|ηj|<5.0,pbT>25 GeV,|ηb|<5.0.

      We renormalize the LO cross sections of the backgrounds to the next-leading-order (NLO) or the next-next-leading-order (NNLO) cross sections by multiplying by a K factor. We ignore the differences of the K factor at the HL-LHC, HE-LHC, and FCC-hh and take the values listed in Table 2 for the different processes.

      Z+jetsTop-pairSingle topDibosonOther
      ProcessesZjjjtˉttˉtWtˉtZtjtWtˉbWWWZZZtˉbZj
      K-factor1.2 [47]1.8 [49]1.2 [50, 51]1.3 [50, 51]1.4 [50, 52]1.6 [50, 52]1.9 [50, 52]1.6 [53]1.7 [53]1.3 [53]1.1

      Table 2.  K-factors of the QCD corrections for the background processes.

      The T quark is significantly heavy, and therefore, the daughter top quark and Z boson are boosted highly. In this case, the C-A reconstruction algorithm [54] is a better choice compared with the conventional anti-kt algorithm [55]. Thus, we adopt the C-A algorithm to reconstruct the signal and backgrounds.

      We transmit these parton-level events to Pythia 8 [56] for the parton shower. Then, we perform a fast detector simulation by Delphes 3.14 [57], where the CMS cards of the LHC, HE-LHC, and FCC-hh are adopted. We use Fastjet [58] to cluster jets with the C-A algorithm, where the distance parameter is fixed at ΔR=1.5. Finally, we use MadAnalysis 5 [59] to perform the event analysis. During program operation, we apply the package EasyScan_HEP [60] to connect these programs and scan the parameter space. We evaluate the expected signal significance by the Poisson formula [61]:

      SS=2L[(σS+σB)ln(1+σSσB)σS],

      (4)

      where L denotes the integrated luminosity, σS and σB denote the cross sections after all cuts for signal and backgrounds, respectively.

    IV.   OBSERVABILITY
    • In this section, we analyze the observability and calculate the statistical significance of the signal at the HL-LHC, HE-LHC, and FCC-hh colliders.

    • A.   s = 14 TeV

    • For the signal, the Z boson is boosted highly so that the large missing energy ET from a pair of neutrinos is expected. Meanwhile, the decay products of the top quark are collimated and captured in a large-radius (large-R) jet. Moreover, the leading b jet that comes from the T decay in the signal will have large transverse momentum due to the boosted effect. Based on the above analysis, we choose the missing energy ET>450 GeV, transverse momentum pb1T>100 GeV, and leading large-R jet-mass 160 GeV<Mj1<190 GeV as the selection criteria. We show these distributions at the 14 TeV LHC in Fig. 2, where mT = 1500 and 1200 GeV (labeled as T1500 and T1200) are chosen as two benchmark points. We summarize the cut flows of the signal and backgrounds in Table 3 and can observe that the largest backgrounds come from tX, tˉt , and Zjjj before cuts. After the selected cuts, all the backgrounds can be suppressed efficiently, and the total cut efficiency of the signal can reach 6.0% (5.4%) for the benchmark point T1500 (T1200). It is worth noting that the backgrounds tX,tˉt,VV,Zjjj are negligibly small after the selected cuts. We have generated events on the order of 106 or more for these backgrounds and found that the remaining events are still negligible. Considering the statistical fluctuation, we take 107 as an optimistic estimate of their cut efficiencies. To investigate the exclusion and discovery capabilities on the VLT at the 14 TeV LHC, we scan the parameter space g[0.05, 0.5] and mT [1000, 2000], where the average value 5.7% of these two signal efficiencies is imposed on the entire parameter space.

      Figure 2.  (color online) Normalized distributions of ET, pb1T, and Mj1 for the two signal benchmark points (T1200 and T1500) and backgrounds with g=0.2 at the 14 TeV LHC.

      CutsSignal/fb T1500(T1200)Backgrounds/fb
      tXtˉtttVVVZjjjtbZj
      σ (Before cut)1.20×101(4.10×101)1.03×1052.17×1057.98×1011.25×1041.91×1051.66×101
      Trigger7.04×102(2.49×101)4.46×1048.28×1042.86×1015.0×1021.21×1031.12×101
      T>450 GeV3.40×102(1.06×101)2.05×1012.17×1021.20×1014.15×1011.91×1023.70×102
      pb1T>100 GeV3.12×102(8.67×102)1.37×1012.17×1029.04×1022.49×1011.91×1022.94×102
      160 GeV<Mj1<190 GeV7.24×103(2.2×102)1.03×1022.17×1021.50×1021.25×1031.91×1024.64×103
      Total efficiency6.0%(5.4%)1071070.019%1071070.028%

      Table 3.  Cut flows of the signal (T1200 and T1500) and backgrounds for g=0.2 at the LHC.

      For the 14 TeV LHC, we show the 2σ exclusion (corresponding to SS=2) and 5σ discovery (corresponding to SS=5) capabilities in the gmT plane in Fig. 3, where the limit from EWPO at the 2σ level is also displayed. If the EWPO limit is not taken into account, the VLT can be excluded in the correlated regions of g [0.16, 0.50] with mT[1000GeV, 1530GeV] corresponding to 300 fb1. For the HL-LHC with 3000 fb1, the excluded correlated regions can be expanded to g [0.09, 0.50] with mT[1000GeV, 1840GeV], and the discovered correlated regions can be expanded to g [0.14, 0.50] and mT[1000GeV, 1600GeV].

      Figure 3.  (color online) 2σ (left) and 5σ (right) contour plots for the signal at s = 14 TeV in the gmT plane. The solid lines indicate the integrated luminosities, the dashed lines indicate the ΓT/mT, and the red solid lines represent the limit from EWPO at the 2σ level.

      It is worth noting that these cross sections are calculated using the narrow-width approximation (NWA). Since the widths of the VLT may be large and not negligible, we also display the width-to-mass ratios ΓT/mT in Fig. 3. If the search at the HL-LHC is sensitive to the ΓT/mT ranging from narrow up to 30%, the excluded (discovered) parameter space will be reduced to g [0.09, 0.39] ([0.14, 0.44]) with mT [1000 , 1750] GeV ([1000 GeV, 1550 GeV]). If the EWPO limit is considered, the excluded (discovered) parameter space will be further reduced to g [0.09, 0.23] ([0.14, 0.24]) with mT [1000 GeV, 1500 GeV] ([1000 GeV, 1300 GeV]) .

    • B.   s = 27 TeV

    • We take the missing energy ET>500 GeV, transverse momentum pb1T>100 GeV, and jet-mass 160 GeV< Mj1< 190 GeV as the selection criteria and show the normalized distributions of the signal and backgrounds for g = 0.2 at the 27 TeV HE-LHC in Fig. 4, where we choose mT = 1500 and 2000 GeV (labeled as T1500 and T2000) as two benchmark points.

      Figure 4.  (color online) Normalized distributions of ET, pb1T, andMj1 for the two signal benchmark points (T1500 and T2000) and backgrounds with g=0.2 at the 27 TeV HE-LHC.

      The cut flows of the signal and the backgrounds are summarized in Table 4. We can see that the total cut efficiency of the signal can reach 4.03% (3.5%) for the benchmark point T1500 (T2000), while the backgrounds can be suppressed effectively. Similar to the LHC, we scan the parameter space g [0.05, 0.5] and mT [1000 GeV, 3000 GeV] and impose the average value 3.77% of these two signal efficiencies to the entire parameter space. The exclusion and discovery capabilities in the gmT plane at the HE-LHC are shown in Fig. 5. Compared to the data of the HL-LHC, the excluded (discovered) correlated regions of the VLT at HE-LHC can be expanded to g [0.05, 0.50] ([0.08, 0.50]) with mT [1000 GeV, 2440 GeV] ([1000 GeV, 2100 GeV]) corresponding to 3000 fb1. For the HE-LHC with 15 ab1, the correlated regions g [0.05, 0.50] with mT [1300 GeV, 2750 GeV] ([1000 GeV, 2400 GeV]) can be excluded (discovered). If the limit ΓT/mT< 30% is considered, the excluded (discovered) regions will be reduced to g [0.05, 0.28] ([0.05, 0.31]) with mT [1300 GeV, 2440 GeV] ([1000 GeV, 2160 GeV]) corresponding to 15 ab1. If the EWPO limit is considered, the excluded (discovered) regions will be further reduced to g [0.05, 0.20] ([0.05, 0.21]) with mT [1300 GeV, 2210 GeV] ([1000 GeV, 1900 GeV]).

      CutsSignal/fb T1500(T2000)Backgrounds/fb
      tXtˉtttVVVZjjjtbZj
      σ (Before cut)1.19(0.24)3098079152103202500069010076.63
      Trigger6.27×101(1.26×101)9.88×1042.65×1058.42×1018.0×1026.07×1034.02×101
      T>500 GeV3.04×101(6.14×102)7.219.15×1023.87×1011.689.111.81×101
      pb1T>100 GeV2.56×101(5.31×102)7.219.15×1022.97×1015.88×1019.111.49×101
      160 GeV<Mj1<190GeV4.79×102(8.44×103)3.10×1029.15×1025.44×1022.5×1036.90×1021.38×102
      Total efficiency4.03%(3.5%)1071070.017%1071070.018%

      Table 4.  Cut flows of the signal (T1500 and T2000) and backgrounds for g=0.2 at the HE-LHC.

      Figure 5.  (color online) Same as Fig. 3, but for s = 27 TeV.

    • C.   s = 100 TeV

    • We take the missing energy ET>650 GeV, transverse momentum pb1T>500 GeV, and jet-mass 160 GeV<Mj1<190 GeV as the selection criteria and show the normalized distributions of the signal and backgrounds for g = 0.2 at 100 TeV FCC-hh in Fig. 6, where mT = 1500 and 2500 GeV (labeled as T1500 and T2500) are chosen as two benchmark points. The cut flows of the signal and backgrounds are summarized in Table 5. We can see that the total cut efficiency of the signal can reach 1.4% (1.3%) for the benchmark point T1500 (T2500). Similarly, we scan the parameter space g[0.05, 0.5] and mT[1000GeV, 4000GeV] and impose the average value 1.35% of these two signal efficiencies to the entire parameter space.

      Figure 6.  (color online) Normalized distributions of ET, pb1T, and Mj1 for the two signal benchmark points (T1500 and T2500) and backgrounds with g=0.2 at the 100 TeV FCC-hh.

      CutsSignal/fb T1500(T2500)Backgrounds/fb
      tXtˉtttVVVZjjjtbZj
      σ (Before cut)21.36(1.96)187997395100253720891385701000779.3
      Trigger1.24×101(1.12)6.94×1053.12×1061.15×1039.45×1035.02×1054.40×102
      T>650 GeV3.69(4.22×101)1.04×1021.87×1023.331.32×1011.76×1021.76
      pb1T>150 GeV3.25(3.79×101)9.76×1011.87×1022.735.858.78×1011.42
      160 GeV<Mj1<190 GeV2.99×101(2.55×102)1.88×1019.51×1014.09×1012.94×1015.70×1011.01×101
      Total efficiency1.4%(1.3%)1071070.011%0.00033%1070.013%

      Table 5.  Cut flows of the signal (T1500 and T2500) and backgrounds for g=0.2 at the FCC-hh.

      The exclusion and discovery capabilities in the gmT plane at s = 100 TeV are shown in Fig. 7. Corresponding to 3000fb1 (15ab1), the T quark can be excluded in the correlated regions of g [0.05, 0.50] ([0.08, 0.50]) with mT [1050 GeV, 2810 GeV] ([1400 GeV, 3240 GeV]) . For the FCC-hh with 30 ab1, the excluded (discovered) regions can be expanded to g [0.05, 0.50] with mT [2500 GeV, 3420 GeV] ([2050 GeV, 2950 GeV]) . If the limit ΓT/mT < 30% is considered, the excluded (discovered) regions will be reduced to g [0.05, 0.24] ([0.05, 0.27]) with mT [2500 GeV, 2880 GeV] ([2050 GeV, 2510 GeV]) corresponding to 30 ab1. If the EWPO limit is considered, the excluded (discovered) regions will be further reduced to g [0.05, 0.19] ([0.05, 0.20]) with mT [2500 GeV, 2660 GeV] ([2050 GeV, 2240 GeV]) .

      Figure 7.  (color online) Same as Fig. 3, but for s = 100 TeV.

    V.   SUMMARY
    • In this study, we investigate the single production of the VLT decaying into tZ with Zνˉν at the HL-LHC, HE-LHC, and FCC-hh. We establish a simplified model including a SU(2) singlet T with charge 2/3, and the T quark couples exclusively to the third-generation SM quarks. At this time, only the mass mT and coupling constant g are the free parameters. Under the limits of LHC direct searches, we perform a detailed detector simulation for the signal and backgrounds. We summarize the exclusion and discovery capabilities on the T quark at different hadron colliders with the highest designed integrated luminosity in Table 6, where the results from the limits ΓT/mT < 30% and EWPO are also listed.

      CollidersExclusion Capability (2σ)Discovery Capability (5σ)
      HL-LHCHE-LHCFCC-hhHL-LHCHE-LHCFCC-hh
      LuminosityL=3 ab1L=15 ab1L=30 ab1L=3 ab1L=15 ab1L=30 ab1
      g[0.09,0.5][0.05,0.5][0.05,0.5][0.14,0.5][0.05,0.5][0.05,0.5]
      mT/GeV[1000, 1840][1300, 2750][2500, 3420][1000, 1600][1000, 2400][2050, 2950]
      g(ΓTmT < 30%)[0.09,0.39][0.05,0.28][0.05,0.24][0.14,0.44][0.05,0.31][0.05,0.27]
      mT/GeV[1000, 1750][1300, 2440][2500, 2880][1000, 1550][1000, 2160][2050, 2510]
      g(EWPO)[0.09,0.23][0.05,0.20][0.05,0.19][0.14,0.24][0.05,0.21][0.05,0.20]
      mT/GeV[1000, 1500][1300, 2210][2500, 2660][1000, 1300][1000, 1900][2050, 2240]

      Table 6.  Exclusion and discovery capabilities on T at different hadron colliders.

      We can see that the exclusion and discovery capabilities on the T quark are enhanced evidently with the increase in the collision energy. If we consider the NWA and EWPO limits, the exclusion and discovery regions will be reduced to some extent. We expect these results to provide a meaningful reference for the search for such a singlet VLT quark at future hadron colliders.

Reference (61)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return