Shunt Impedance and Power of the BEPC DC Separator

DAI Jian-Ping; CHAI Xue-Dong; ZHAO Zhen-Tang

Chinese Physics C> 2001, Vol. 25> Issue(7) : 680-683

Shunt Impedance and Power of the BEPC DC Separator

Institute of High Energy Physics, CAS, Beijing 100039, China

Abstract
HTML
Reference
Related

PDF

Abstract：
During the operation of BEPC, the cable isolation layer near the high voltage connector of the DC separator is often melted, which is probably caused by the power of the resonant modes. This paper presents the measurement of the shunt impedance and the calculation of the power dissipated in the separator and through the connector.

References

[1]

. ZHOU F ,GUO Z Y ,WANG S H .Impedance Studies for BEPC PAC97,1729—17312. Haebel E.RF Design Higher Order Modes.Lecture Note in Physics No.425,Beiglbock W et al Eds,Spinger-Verlag,Berlin Heidelberg,1992,312—316 3. Wilson P .High Energy Electron Linacs:Application to Storage Ring RF Systems and Linac Collider.SLAC-PUB-2884,Feb.1982,35—444. Guo Z et al.Beam Instability Studies in the BEPC.EPAC2000,1127—1129

Access

Get Citation

DAI Jian-Ping, CHAI Xue-Dong and ZHAO Zhen-Tang. Shunt Impedance and Power of the BEPC DC Separator[J]. Chinese Physics C, 2001, 25(7): 680-683.

DAI Jian-Ping, CHAI Xue-Dong and ZHAO Zhen-Tang. Shunt Impedance and Power of the BEPC DC Separator[J]. Chinese Physics C, 2001, 25(7): 680-683. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2000-06-22
Revised: 1900-01-01

Article Metric

Article Views(4143)
PDF Downloads(560)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Shunt Impedance and Power of the BEPC DC Separator

Corresponding author: DAI Jian-Ping,

Institute of High Energy Physics, CAS, Beijing 100039, China

Received Date: 2000-06-22
Accepted Date: 1900-01-01
Available Online: 2001-07-05

Abstract: During the operation of BEPC, the cable isolation layer near the high voltage connector of the DC separator is often melted, which is probably caused by the power of the resonant modes. This paper presents the measurement of the shunt impedance and the calculation of the power dissipated in the separator and through the connector.