A Calculation Method for RF Couplers Design Based on Numerical Simulation by Microwave Studio

WANG Rong; PEI Yuan-Ji; JIN Kai

Chinese Physics C> 2006, Vol. 30> Issue(6) : 566-570

A Calculation Method for RF Couplers Design Based on Numerical Simulation by Microwave Studio

University of Science and Technology of China,National Synchrotron Radiation Laboratory, Hefei 230029, China

Abstract
HTML
Reference
Related

PDF

Abstract：
A numerical simulation method for coupler design is proposed. It is based on the matching procedure for the 2π/3 structure given by Dr. R. L. Kyhl. Microwave Studio EigenMode Solver is used for such numerical simulation. The simulation for a coupler has been finished with this method and the simulation data are compared with experimental measurements. The results show that this numerical simulation method is feasible for coupler design.

References

[1]	. Derutyer C K Ng H, Ko K. Numerical Simulation of Cou-pler Cavities of Linacs: SLAC-PUB-6220. April 19932. JIN K. NIM, 2005, 539: 100—1043. WestBrook E. Microwave Impedance Matching of Feed Waveguide to the Disk-loaded Accelerator Structure Operating in the 2π/3 Mode: SLAC-TN-63-103. December1963

Access

Get Citation

WANG Rong, PEI Yuan-Ji and JIN Kai. A Calculation Method for RF Couplers Design Based on Numerical Simulation by Microwave Studio[J]. Chinese Physics C, 2006, 30(6): 566-570.

WANG Rong, PEI Yuan-Ji and JIN Kai. A Calculation Method for RF Couplers Design Based on Numerical Simulation by Microwave Studio[J]. Chinese Physics C, 2006, 30(6): 566-570. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2005-11-22
Revised: 2006-02-14

Article Metric

Article Views(4178)
PDF Downloads(764)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

A Calculation Method for RF Couplers Design Based on Numerical Simulation by Microwave Studio

Corresponding author: WANG Rong,

University of Science and Technology of China,National Synchrotron Radiation Laboratory, Hefei 230029, China

Received Date: 2005-11-22
Accepted Date: 2006-02-14
Available Online: 2006-06-05

Abstract: A numerical simulation method for coupler design is proposed. It is based on the matching procedure for the 2π/3 structure given by Dr. R. L. Kyhl. Microwave Studio EigenMode Solver is used for such numerical simulation. The simulation for a coupler has been finished with this method and the simulation data are compared with experimental measurements. The results show that this numerical simulation method is feasible for coupler design.