3D Quench Simulation Using Finite Element Method for CR Superconducting Magnet's Strand

WU Wei; HE Yuan; MA Li-Zhen; LI Qing; YAO Qing-Gao; BIAN Wen-Long; XIA Jia-Wen

Chinese Physics C> 2008, Vol. 32> Issue(S1) : 15-18

3D Quench Simulation Using Finite Element Method for CR Superconducting Magnet's Strand

Abstract
HTML
Reference
Related

PDF

Abstract：
The CR superconducting magnet is a dipole of the FAIR project of GSI in Germany. The quench of the strand is simulated using FEM software ANSYS. From the simulation, the quench propagation can be visualized. Programming with APDL, the value of propagation velocity of normal zone is calculated. Also the voltage increasing over time of the strand is computed and pictured. Furthermore, the Minimum Propagation Zone (MPZ) is studied. At last, the relation between the current and the propagation velocity of normal zone,
and the influence of initial temperature on quench propagation are studied.

References

[1]	. Wilson M N. Superconducting Magnets, 1983, ClarendonPress Oxford2. Marscin E, Yamada R, Lee A. 2D/3D ANSYS Quench Sim-ulation Manual, July 30, 2002. Fermibab Internal Report3. Floch E. Protection Scheme of the CR Dipole, 19.03. 2007

Access

Get Citation

WU Wei, HE Yuan, MA Li-Zhen, LI Qing, YAO Qing-Gao, BIAN Wen-Long and XIA Jia-Wen. 3D Quench Simulation Using Finite Element Method for CR Superconducting Magnet's Strand[J]. Chinese Physics C, 2008, 32(S1): 15-18.

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-01-09
Revised: 1900-01-01

Article Metric

Article Views(4458)
PDF Downloads(1021)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

3D Quench Simulation Using Finite Element Method for CR Superconducting Magnet's Strand

Corresponding author: WU Wei,

Received Date: 2008-01-09
Accepted Date: 1900-01-01
Available Online: 2008-01-04

Abstract: The CR superconducting magnet is a dipole of the FAIR project of GSI in Germany. The quench of the strand is simulated using FEM software ANSYS. From the simulation, the quench propagation can be visualized. Programming with APDL, the value of propagation velocity of normal zone is calculated. Also the voltage increasing over time of the strand is computed and pictured. Furthermore, the Minimum Propagation Zone (MPZ) is studied. At last, the relation between the current and the propagation velocity of normal zone,
and the influence of initial temperature on quench propagation are studied.