Upgrade of BPM System for the BEPC Storage Ring

Ma Li; Shi Ping; Ye Kairong

Chinese Physics C> 1998, Vol. 22> Issue(5) : 475-480

Upgrade of BPM System for the BEPC Storage Ring

Institute of High Energy Physics, The Chinese Academy of Sciences, Beijing 100039

Abstract
HTML
Reference
Related

PDF

Abstract：
The beam position monitoring (BPM) system for the storage ring of the reproducibility of the measurement is better than 10 microns. The measurement timefor scanning all BPMs is about 11 seconds.The dynamic rang of the system is over81 dB and the minimum measurable beam intensity is less than 0.5mA.The reliabilityof the measurement s assured by the self-consistency check.
References

[1] Ma L,Shi P,Ye K et al.Beam Position Monitoring System for the BEPC Storage Ring.Proc. of EPAC'96. Sitges, Spain, June1996
Access

Get Citation

Ma Li, Shi Ping and Ye Kairong. Upgrade of BPM System for the BEPC Storage Ring[J]. Chinese Physics C, 1998, 22(5): 475-480.

Ma Li, Shi Ping and Ye Kairong. Upgrade of BPM System for the BEPC Storage Ring[J]. Chinese Physics C, 1998, 22(5): 475-480. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 1900-01-01
Revised: 1900-01-01

Article Metric

Article Views(3627)
PDF Downloads(516)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Upgrade of BPM System for the BEPC Storage Ring

Corresponding author: Ma Li,

Institute of High Energy Physics, The Chinese Academy of Sciences, Beijing 100039

Received Date: 1900-01-01
Accepted Date: 1900-01-01
Available Online: 1998-05-05

Abstract: The beam position monitoring (BPM) system for the storage ring of the reproducibility of the measurement is better than 10 microns. The measurement timefor scanning all BPMs is about 11 seconds.The dynamic rang of the system is over81 dB and the minimum measurable beam intensity is less than 0.5mA.The reliabilityof the measurement s assured by the self-consistency check.