-
Abstract:
RIBLL1 experimental setup consists of RIB identification system,secondary target control system and secondary reaction products measurement system.The high gain x-y position sensitive PPAC with delay cable grouped readout,the scintillation foil time pickup detector focusing with ellipsoidal surface,the traverse field IC,the large area two dimensional position sensitive scintillatillator with PMT matrix readout,the Compton suppressed HPGe γ-ray detectors and twin longitudinal field iC are major components.This setup has been installed at RIBLL1.The performance measurements and test experiments are in progress.
-
-
References
|
[1]
|
I.Tanihata et al.,Phys.Rew.Lett.,55(1985)2676.[2]R.Anne et al.Nucl.Instr.Meth.,A25(1987)215.[3]A.C.Mueller et al.,Nucl.Instr.Meth.,B56/57(1991)559.[4]B.M.Sherrill et al.,Proc.1st Int.Conf.on Radioactive Nuclear Beams(1989)p72.[5]B.M.Sherrill et al.,Nucl.Instr.Meth.,B56/57(1991)1106.[[6]T.Kubo et al.,Proc.1st 2nd Conf.on Radioactive Nuclear Beams(1990)p563.[7]M.Ishihara et al.,RI beam factory advisor's meeting(Sept.1994).[8]H.Geissel et al.,GSI Report GSI-89-30(989).[9]H.Geissel et al.,Nucl.Instr.Meth.,B70(1992)286.[10]Guillemaud-Mueller et al.Z.Phys.,A322(1985)415.[11]F.Pougheon et al.,Europhys.Lett.,2(1986)505.[12]D.Guillemaud-Mueller et al.,P GANIL 88-14.[13]D.J.Morrissey et al.,Nucl.Phys.,A538(1992)333c.[14]M.Weber et al.,GSI-91-49 Preprint.[15]ZhanWenlong et al.,Radioactive ion beam at HIRFL,3rd IN2P3-RIKEN Symp.on Heavy Ion Collision Oct.(1994).[16]Zhao Youxiong et al.,Nucl.Instr.Meth.,A355(1995)464.
|
-
-
Access
-
-