NUMERICAL CALCULATION FOR ELECTROSTATIC DECELERATING LENS ENERGY ANALYZER

HU Yu-Min; LI Yi

Chinese Physics C> 1989, Vol. 13> Issue(6) : 490-493

NUMERICAL CALCULATION FOR ELECTROSTATIC DECELERATING LENS ENERGY ANALYZER

HU Yu-Min ^, ,
LI Yi

Tsinghua University,Beijing

Abstract
HTML
Reference
Related

PDF

Abstract：
The potential distribution in the electrostatic decelerating lens is calculated with charge-density method.The Gill method is used to simulate the electron orbits.The resolution of the analyzer is 1.0eV at 20keV.The influence of the beam diameter,injection angle and the hole diameter of the third electrode to the resolution are discussed.Some additions to the experimental data are given by simulation.

References

[1]	V. G. Frst, Z. Angew. Physik, 10(1958), 546.[2] 胡玉民等，原子能科学技术，13,(1979),61.[3] Masayuki Fukao et al, Japan. J. of Appl. Phys., 14(1975), 1017.[4] A Renau et al., J. Phys. E: Sci. Instrum., 15(1982), 347.[5] 李明阳等，电子科学，8(1986),470,

Access

Get Citation

HU Yu-Min and LI Yi. NUMERICAL CALCULATION FOR ELECTROSTATIC DECELERATING LENS ENERGY ANALYZER[J]. Chinese Physics C, 1989, 13(6): 490-493.

HU Yu-Min and LI Yi. NUMERICAL CALCULATION FOR ELECTROSTATIC DECELERATING LENS ENERGY ANALYZER[J]. Chinese Physics C, 1989, 13(6): 490-493. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 1900-01-01
Revised: 1900-01-01

Article Metric

Article Views(3349)
PDF Downloads(426)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

NUMERICAL CALCULATION FOR ELECTROSTATIC DECELERATING LENS ENERGY ANALYZER

HU Yu-Min ^,
LI Yi

Corresponding author: HU Yu-Min,

Tsinghua University,Beijing

Received Date: 1900-01-01
Accepted Date: 1900-01-01
Available Online: 1989-06-05

Abstract: The potential distribution in the electrostatic decelerating lens is calculated with charge-density method.The Gill method is used to simulate the electron orbits.The resolution of the analyzer is 1.0eV at 20keV.The influence of the beam diameter,injection angle and the hole diameter of the third electrode to the resolution are discussed.Some additions to the experimental data are given by simulation.