×
近期发现有不法分子冒充我刊与作者联系,借此进行欺诈等不法行为,请广大作者加以鉴别,如遇诈骗行为,请第一时间与我刊编辑部联系确认(《中国物理C》(英文)编辑部电话:010-88235947,010-88236950),并作报警处理。
本刊再次郑重声明:
(1)本刊官方网址为cpc.ihep.ac.cn和https://iopscience.iop.org/journal/1674-1137
(2)本刊采编系统作者中心是投稿的唯一路径,该系统为ScholarOne远程稿件采编系统,仅在本刊投稿网网址(https://mc03.manuscriptcentral.com/cpc)设有登录入口。本刊不接受其他方式的投稿,如打印稿投稿、E-mail信箱投稿等,若以此种方式接收投稿均为假冒。
(3)所有投稿均需经过严格的同行评议、编辑加工后方可发表,本刊不存在所谓的“编辑部内部征稿”。如果有人以“编辑部内部人员”名义帮助作者发稿,并收取发表费用,均为假冒。
                  
《中国物理C》(英文)编辑部
2024年10月30日

BEPCⅡ Positron Source

  • BEPCⅡ— an upgrade project of the Beijing Electron Positron Collider (BEPC) is a factory type of ee collider. The fundamental requirements for its injector linac are the beam energy of 1.89GeV for on-energy injection and a 40mA positron beam current at the linac end with a low beam emittance of 1.6μm and a low energy spread of ±0.5% so as to guarantee a higher injection rate (≥50mA/min) to the storage ring. Since the positron flux is proportional to the primary electron beam power on the target, we will increase the electron gun current from 4A to 10A by using a new electron gun system and increase the primary electron energy from 120MeV to 240MeV. The positron source itself is an extremely important system for producing more positrons, including a positron converter target chamber, a 12kA flux modulator, the 7m focusing module with DC power supplies and the support. The new positron production linac from the electron gun to the positron source has been installed into the tunnel. In what follows, we will emphasize the positron source design, manufacture and tests.
  • 加载中
  • [1] . PEI G X et al. Design Report of the BEPC/ InjectorLinac: IHEP-BEPCII-SB-03-02. November 20032. GOU W P, PEI G X. HEP NP, 2002, 26(3): 279-285(in Chinese)(苟卫平,裴国玺.高能物理与核物理,2002, 26(3): 279-285)3. Kulikov A V et al. SLC Positron Source Pulsed Flux Con-centrator. Proceedings of 1991 IEEE Particle Accelerator Conference. San Francisco, 1991. 20054. LIU J T et al. HEP NP, 2005, 29(4): 404(in Chinese)(刘晋通等.高能物理与核物理,2005, 29(4): 404)5. Lamare J de, et al. SLC Positron Source Flux Concentrator Modulator. Proceedings of 1991 IEEE Particle Accelerator Conference. San Francisco, 1991. 31386. Nam S H et al. Injection Kicker Modulator in 2GeV PohangLight Source.Proceedings of 1998 Twenty Third Interna-tional Power Modulator Symposium
  • 加载中

Get Citation
PEI Guo-Xi, SUN Yao-Lin, LIU Jin-Tong, CHI Yun-Long, LIU Yu-Cheng and LIU Nian-Zong. BEPCⅡ Positron Source[J]. Chinese Physics C, 2006, 30(1): 66-70.
PEI Guo-Xi, SUN Yao-Lin, LIU Jin-Tong, CHI Yun-Long, LIU Yu-Cheng and LIU Nian-Zong. BEPCⅡ Positron Source[J]. Chinese Physics C, 2006, 30(1): 66-70. shu
Milestone
Received: 2005-05-13
Revised: 1900-01-01
Article Metric

Article Views(1669)
PDF Downloads(715)
Cited by(0)
Policy on re-use
To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Email This Article

Title:
Email:

BEPCⅡ Positron Source

    Corresponding author: PEI Guo-Xi,
  • Institute of High Energy Physics,CAS,Beijing 100049,China

Abstract: BEPCⅡ— an upgrade project of the Beijing Electron Positron Collider (BEPC) is a factory type of ee collider. The fundamental requirements for its injector linac are the beam energy of 1.89GeV for on-energy injection and a 40mA positron beam current at the linac end with a low beam emittance of 1.6μm and a low energy spread of ±0.5% so as to guarantee a higher injection rate (≥50mA/min) to the storage ring. Since the positron flux is proportional to the primary electron beam power on the target, we will increase the electron gun current from 4A to 10A by using a new electron gun system and increase the primary electron energy from 120MeV to 240MeV. The positron source itself is an extremely important system for producing more positrons, including a positron converter target chamber, a 12kA flux modulator, the 7m focusing module with DC power supplies and the support. The new positron production linac from the electron gun to the positron source has been installed into the tunnel. In what follows, we will emphasize the positron source design, manufacture and tests.

    HTML

Reference (1)

目录

/

DownLoad:  Full-Size Img  PowerPoint
Return
Return